flue gas analysis system Articles

  • Wet Flue Gas Desulfurization System

    Installing the optimum wet flue gas desulfurization technology, B&V Energy is bringing superior multi-pollutant removal technology to the North American utility marketplace. To help make a positive impact on the global environment and to comply with the Clean Air Interstate and Clean Air Mercury Rules, Dayton Power & Light needed to remain in compliance as more stringent air quality ...


    By Black & Veatch Corporation

  • An analysis of extinction coefficients of particles and water moisture in the stack after flue gas desulfurization at a coal-fired power plant

    Two important factors that affect in-stack opacity—light extinction by emitted particles and that by water moisture after a flue gas desulfurization (FGD) unit—are investigated. The mass light extinction coefficients for particles and water moisture, kp and kw, respectively, were determined using the Lambert-Beer law of opacity with a nonlinear least-squares regression method. The ...

  • CFD Analysis of Gas Cooling

    In many industrial processes, hot gas is cooled down due to the evaporation (boiling) of sprayed droplets. The effects of two different atomizer types, inner mixing air atomizing nozzles and flow back nozzles, on the cooling behavior inside a spray tower for a typical flue gas are discussed. The heat and mass transfer is computed using computational fluid dynamics (CFD). The interaction between ...


    By Spraying Systems Co.

  • The Influence of PVC on the Quantity and Hazardousness of Flue Gas Cleaning Residues from Incineration

    The study estimates the influence of PVC on the quantity and hazardousness of flue gas residues from incineration. The analysis has been carried out on both theoretical and practical terms. A distinction between dry, semi-dry and wet gas treatment systems has been made. The influence of PVC has been assessed on the combustion steps and therefore on the distribution of chlorine and other ...

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Marketing Analysis of Low Temperature Waste Heat Boiler

    Environmental pollution brought by the burning of fossil fuels and improper energy use structure have became big problems of boiler manufacturer like ZG. To need the market demand for the development of new energy and renewab ...


  • Ford Motor Co. Ltd reduce emissions by 5.1% on gas fired boiler plant using Maxsys Fuel Systems.

    As part of an ongoing objective to reduce emissions and conserve energy at the Ford Motor Company’s Dunton Technical Centre, Maxsys Fuel Systems have been fitted to the boiler plant, helping the company to achieve over 5% reduction in gas usage with a commensurate reduction in emissions. The Energy Committee at Dunton decided to investigate ways of reducing gas usage by improving ...


    By Maxsys Fuel Systems Ltd

  • Analysis of PCBs in emission samples: non ortho, mono-ortho and homolog totals by level of chlorination

    IntroductionPolychlorinated biphenyls (PCBs) are one of the most widespread persistent organic pollutants, identified in every component of the global ecosystem. A production of approximately 2 * 10 9 Kg technical PCB occurred form 1930 to the late 1970 1 and the total amount released into the environment is estimated in 370. 000 2 tonnes. Twelve of the possible 209 PCBs are non- and mono-ortho ...


    By Monitoring Systems GmbH

  • Analysis of PCBs in emission samples: non ortho, mono-ortho and homolog totals by level of chlorination

    Polychlorinated biphenyls (PCBs) are one of the most widespread persistent organic pollutants, identified in every component of the global ecosystem. A production of approximately 2 * 10 9 Kg technical PCB occurred form 1930 to the late 1970 1 and the total amount released into the environment is estimated in 370. 000 2 tonnes. Twelve of the possible 209 PCBs are non- and mono-ortho substituted ...


    By Monitoring Systems GmbH

  • Rectify dry cycling of gas boilers and reduce energy costs by 25%

    Building engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and hot water demand. It is often thought that existing building management systems (BMS) and building energy management systems (BEMS) are optimising the boilers to remove dry cycling. However, the BMS is ...


    By Vital Efficienci Ltd.

  • Gas boiler load optimisation controls can rectify dry cycling and reduce energy costs by 25%

    Dry cycling of gas boilers can waste a great deal of energy, even when BMS optimisation is in use. Installing gas boiler load optimisation controls can reduce this waste and help boilers run more efficientlyBuilding engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and ...


    By Vital Efficienci Ltd.

  • How much will a zero liquid discharge system cost your facility?

    With increasing stewardship of environmental protection, both nationally and internationally, many industrial facilities and effluent regulators are strengthening strategies to reduce industrial process waste by implementing zero liquid discharge (ZLD), a process that limits liquid waste at the end of your industrial process to—as the term suggests—zero. A ...


    By SAMCO Technologies, Inc.

  • Enhancing the efficiency of crude oil transportation pipeline: a novel approach

    In this paper, exergy and economic analyses are carried out on a 30″ crude oil transportation pipeline and related pump stations. The exergy destructions and losses of the components and the entire system were determined in the operation, resulting in the identification of the gas turbines stacks as the major elements of exergy losses. A proposal has been made for improving the energy and exergy ...


    By Inderscience Publishers

  • OTM 17: Determination of Metal Concentrations Using Filters and Solid Sorbents in XRF Analyisis case study

    Eli Lilly and Company (Lilly) operates a waste incineration system located at the Tippecanoe Laboratories in Lafayette, Indiana. This incinerator system includes an Xact multi-metals continuous emissions monitoring system (Xact-CEMS, manufactured by Cooper Environmental Services, LLC) for demonstrating attainment with the Hazardous Waste Combustor MACT for semi-volatile metals, low-volatile ...


    By Cooper Environmental

  • Economic evaluation for air pollution control technologies selection in power plants processes

    Air quality legislation is entering a transformation phase, shifting the concept of atmospheric emission control towards pollution prevention and emission minimization through a more integrated approach. This transformation, along with public pressure and increased foreign trade, is providing industries with incentives to consider their effect on the environment and to take action where required. ...

  • CO2 absorption study in a bubble column reactor with Mg(OH)2

    CO2 from the combustion of fossil fuels is the largest source of greenhouse gas emissions in the USA. Recently, there has been a growing interest in economical processes for the separation and sequestration of CO2 emissions from flue gas. The goal of this study was to study the absorption characteristics of CO2 from a simulated flue gas using reclaimed ...


    By Inderscience Publishers

  • Unity – Intelligent boiler house control case study

    Achieve efficient and cost-effective management of multiple boiler house systems with UNITY from Byworth – the next-generation of control interfaces. Offering unprecedented levels of visibility and fingertip control of every aspect of boiler house technology, UNITY was conceived and created by a team headed by Jason Atkinson; runner-up Electrical Apprentice of the Year and ...


    By Byworth Boilers

  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you