flue gas conditioning technology Articles

  • Cleaning the Air We Breathe, Coal Fired Power Plant - Case Study

    By cleaning flue gases from coal power plants, the amount of environmentally hazardous emissions can be sharply reduced. Mist elimination from Munters is a critical part of this process. Munters has worked with leading power generating companies for decades and have through testing and follow up built an extensive parameter database and design tool to be able to adapt and optimize results based ...


    By Munters Zeol Division

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • 20th Annual Presidential Green Chemistry Challenge Awards highlight biomass- and waste-to-resource technologies

    On July 13, 2015, the U.S. Environmental Protection Agency (EPA) announced the winners of the 20th Annual Presidential Green Chemistry Challenge Awards (PGCCA) and honored them at a ceremony at the National Academy of Sciences in Washington, D.C. The PGCCAs were created in partnership with the American Chemical ...


    By Bergeson & Campbell, P.C.

  • Dispersed Phase Inertisation (DPI): A New Technology for the Treatment of Landfill Leachate and Complex Water

    Inertisation is thus far the only technology for the conversion of leachate and contaminated water into an inert product, thereby facilitating handling and disposal in MSW landfills. Introduction One of the most complex aspects of the global management of an MSW landfill or treatment plant is leachate. This liquid comes mainly from the degradation of organic matter, added to other ...


    By Energy & Waste S.l

  • First industrial application of an open absorption cycle for heat transformation in a district-heating network

    The first plant for high temperature utilisation of higher heating value was realised under industrial conditions in a combined heat and power plant. The technology results in an increased heat recovery temperature and a stronger dehumidification of the flue gas. Beyond that, the use of large solution flow within an adiabatic absorber enables to combine gas scrubbing and dehumidifying. Economic ...


    By Inderscience Publishers

  • Science in Aid of Cleaner Air

    Some 60 million tons per year of nitric oxides are released worldwide to the environment as the consequence of human energy consumption. Efficient technologies have been developed to treat flue gas, and Sulzer with some 50 plants is the technology leader. A recent example is AES Cayuga, a coal-fired power plant in Lansing, NY (USA). The combustion of fossil fuels is often conducted at highest ...


  • The Right Mix for Clean Air

    Reducing air pollution is an increasingly important topic all around the world. Many governments—also in developing countries—set new limits for emissions such as nitrogen oxides in flue gas. Sulzer offers advanced mixing technology for flue gas cleaning. The installation in a large power plant shows that these high-performance mixers can cope with the most difficult requirements. ...


    By Sulzer

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • THE CANSOLV® SYSTEM PROCESS: A NEW PARADIGM FOR SO2 RECOVERY AND RECYCLE

    Significant progress has been made in the last 25 years in the control of emissions resulting from the burning of sulfur bearing fuels and from other industrial processes. The dominant desulfurization technology today is limestone or lime-based scrubbing in various forms. While in general reliable and, in some forms, capable of high SO2 removal efficiency, they produce large quantities of low ...

  • Feasibility of using ionic liquids for carbon dioxide capture

    Ionic liquids (ILs) are organic salts that are liquids in their pure state at ambient conditions. They are frequently referred to as "environmentally benign" due to their immeasurably low vapour pressure. In addition to their more widely studied capabilities as solvents for reactions, several ionic liquids also show potential in other environmentally conscious applications, such as in the capture ...


    By Inderscience Publishers

  • Minimization of Major Air Pollutants from Sewage Sludge Fluid Bed Incinerators

    ABSTRACT Emissions of major air pollutants including carbon monoxide (CO), nitrogen oxides (NOx) and mercury (Hg) were studied at two sewage sludge fluidized bed combustion (FBC) plants. Both the North West Bergen (NWB) County Utility Authority and the Little Miami (LM) plants have air pollution control systems (APCS) that are of the wet type. Various operating conditions such as temperature, ...

  • Unity – Intelligent boiler house control case study

    Achieve efficient and cost-effective management of multiple boiler house systems with UNITY from Byworth – the next-generation of control interfaces. Offering unprecedented levels of visibility and fingertip control of every aspect of boiler house technology, UNITY was conceived and created by a team headed by Jason Atkinson; runner-up Electrical Apprentice of the Year and ...


    By Byworth Boilers

  • A STIEFEL project UTO Uvrier case study

    The waste incineration plant UTO Uvrier is situated in the south western part of Switzerland. The Association which controls the plant was established in 1969 and treats waste from 44 municipalities with a combined population of 170,000 inhabitants. The principal task of UTO Uvrier is the thermal heat recovery from urban and industrial waste. Apart from this, UTO also treats other types of waste ...


    By Jakob Stiefel GmbH

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • To MACT and Beyond case study

    In the 1970s, FMC Corp., a chemical manufacturer headquartered in Philadelphia, began operating a high-efficiency thermal destruction facility to dispose of hazardous liquid wastes at its Baltimore pesticide manufacturing plant. The facility used a thermal oxidizer with a rapid quencher and packed tower scrubber to remove air pollution emissions. The system was upgraded in the early ’80s ...


    By Bionomic Industries Inc.

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Wasting energy through steam loss

    The European Union Directive on the Energy Performance of Buildings, which relates to all member nations of the European Union, are obliged to set limits on greenhouse gas emissions, particularly from buildings. Typically steam is used for a wide range of applications within larger establishments including, humidification, hot water, space heating and air heating.  Primary energy losses in ...

  • WESPS continue to deliver

    Compliance with the increasingly stringent air pollution regulations of recent years is not the only reason forwardthinking industry leaders are adopting more sophisticated gas cleaning and air pollution control strategies. The desire to achieve higher performance efficiencies, control costs in a competitive marketplace, and stay ahead of the regulatory compliance curve is another driver of ...


    By Beltran Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you