flue gas emissions Articles

  • Wet Flue Gas Desulfurization System

    Installing the optimum wet flue gas desulfurization technology, B&V Energy is bringing superior multi-pollutant removal technology to the North American utility marketplace. To help make a positive impact on the global environment and to comply with the Clean Air Interstate and Clean Air Mercury Rules, Dayton Power & Light needed to remain in compliance as more stringent air quality ...


    By Black & Veatch Corporation

  • Development of durable and reactive regenerable sorbents for high temperature flue gas desulphurisation

    One of the emerging technologies for combined SO2 and NOx removal from flue gases is the copper oxide process, which is based on the use of a regenerable sorbent. Sorbent properties such as SO2 sorption capacity, reactivity, crush strength, and long-term durability have significant impact on the overall process cost. In this study, a ...


    By Inderscience Publishers

  • Capture of carbon dioxide from flue gas using solid regenerable sorbents

    Carbon dioxide emissions from the combustion of fossil fuels are a significant factor in global climate change. Large stationary sources such as coal-fired electric generating plants are likely to be the most cost-effective targets for carbon dioxide capture. At present, liquid amine-based scrubbing systems are the only processes available for this application. Processes based on regenerable ...


    By Inderscience Publishers

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Electrofilter protection by fast monitoring of CO in flue gas – Case Study

    Electrostatic precipitators Many industrial operations produce exhaust gases that contain dust, fly ash (unburned constituents), fumes (including fine elemental particles such as cadmium, sulfur and lead) and mist (such as coal tar), which cause an unwanted impact to human health and the environment. One widely used method of removing such contaminants from a gas stream is to use an ...

  • Recyclone MH System to Reduce Particulate Matter from a coal or palm shell BFB Boiler Flue Gas below 150mg/Nm3 - Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Mechanical Recyclone (Recyclone MH) for Basuki Pratama Engineering. Basuki, based in Pulogadung (Jakarta, Indonesia) is the Indonesian leading producer of non-polluting high efficiency steam boilers, as well as thermal oil heaters using fluidized bed combustor or chaingrate stoker. The installed ...

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Pollutant emissions from modern incinerators

    Emissions of dioxins are mainly from incinerators, domestic and industrial coal combustion, and traffic. However, the major public concern and research effort are associated with the emissions of organic micropollutants from waste incinerators. This paper gives a brief overview of the more recent research and development for the removal of dioxins and heavy metals from flue-gas streams. Special ...


    By Inderscience Publishers

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • A selective catalytic system for greenhouse gas (NOx) emission reduction at a 2–ethyl hexanol plant

    Trends of ambient NOX levels in the Jubail Industrial City, Saudi Arabia, are increasing, and the regulators have identified areas requiring substantial reductions to control the atmospheric NOX concentrations. In this study, a Selective Catalytic Reduction (SCR) system for the control of NOX ...


    By Inderscience Publishers

  • Ford Motor Co. Ltd reduce emissions by 5.1% on gas fired boiler plant using Maxsys Fuel Systems.

    As part of an ongoing objective to reduce emissions and conserve energy at the Ford Motor Company’s Dunton Technical Centre, Maxsys Fuel Systems have been fitted to the boiler plant, helping the company to achieve over 5% reduction in gas usage with a commensurate reduction in emissions. The Energy Committee at Dunton decided to investigate ways of reducing gas usage by improving ...


    By Maxsys Fuel Systems Ltd

  • Hydrocarbon evaporative emissions & control for automotives

    Even the cleanest and most efficient vehicle on the market today still pollutes the air and otherwise damages the environment. Motor vehicles emit several noxious pollutants which vehicle emissions standards are designed to regulate. Vehicles generally emit Hydrocarbons (HC), Carbon monoxide (CO), Nitrogen oxides (NOx) and Fine airborne particulate matter (PM) as pollutants that require control. ...

  • Low emissions from large plants too

    Type     HOFGAS®- LPM 3000 Performance     3’000 Nm³/h, 15’000 kW Location     Scotland (GB) SituationEvery year, 150’000 tonnes of waste from Edinburgh, Lothian and the Borders Region are brought to the Dunbar landfill site. The waste is transported by rail to the site. In 2002, the UK Environmental Agency ...


    By Hofstetter BV

  • Bionomic Boiler MACT Emission Control Technologies

    Introduction Bionomic Industries' extensive line of field-proven, cost effective wet and dry scrubber and electrostatic technology choices can easily and economically help you achieve compliance with EPA Boiler MACT regulations for hydrochloric acid, particulate or mercury control. Bionomics' wide range of equipment enables selection of the best control technology to remove a specific or ...


    By Bionomic Industries Inc.

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By SIGRIST - PHOTOMETER AG

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Controlling acid gas mists

    Gas cleaning New and strict pollution regulations in metallurgical plants worldwide are restricting particulate and acid gas emissions to extremely low levels. Because of that, sulphuric acid plants are being installed to remove and utilise S02 in gases resulting from the roasting of sulphide ores, smelting of ores, and burning or regeneration of spent acid or acid sludge from ...


    By Beltran Technologies, Inc.

  • A novel approach for modelling of NOx emission reduction in a tangentially fired coal boiler

    In this research paper, predictive modelling of NOx emission of a 210 MW capacity pulverised coal–fired boiler and combustion parameter optimisation to reduce NOx emission in flue gas is proposed. The effects of oxygen concentration in flue gas, coal properties, coal flow, boiler load, air distribution scheme, flue gas outlet temperature and nozzle tilt were studied. The data collected from ...


    By Inderscience Publishers

  • Shipping Emissions - The Environmental Case for Sea Water Scrubbing

    The romantic image of a luxury liner cruising blue seas amid blue skies and trailing a plume of smoke is too close to the truth for comfort. The emissions from shipping make an increasingly conspicuous contribution to air quality, health and environmental problems of Europe, and indeed, the world. Yet an effective and safe technology to dramatically reduce these emissions is being discouraged, ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you