flue gas filtration Articles

  • Practical Implementation of EN-14181in Particulate Monitoring - Case Study

    Introduction This case study summarises the results of implementing particulate monitoring according to EN-14181 in a municipal incinerator operated by SUA in Teesside, UK, with a ProScatter M type particulate instrument (Model PCME QAL 181). It also provides a comparison of results for monitoring the same stack with an ElectroDynamic particulate instrument (Model PCME QAL 991). This case ...


    By PCME Ltd

  • Industrial Wastewater Treatment: Priority pollutant behaviour in on-site treatment systems for industrial wastewaters

    The majority of wastewaters deriving from the chemical industry consist of aqueous discharges produced during the physico-chemical processing of synthetic mixtures involving operations such as filtration, centrifugation, extraction and/or distillation. The wastewater streams, referred to as ‘process waters’ can include mother liquors, washing waters from the purification of products, ...


    By IWA Publishing

  • Case study - Bespoke Solutions

    PROJECT 5000kg/h animal remains incineration project in accordance with EU WID Makkah, Kingdom of Saudi Arabia PROJECT DESCRIPTION The purpose of the plant was to dispose of the animal waste associated with Hajj religious festi-val in Makkah Saudi Arabia. During the festival approximately 10,000 tonnes of waste is pro-duced in 4-5 days. Historically ...


    By Todaysure Limited

  • Case study - Bespoke Solutions

    PROJECT 700kg/h animal remains incineration project in accordance with EU WID (Waste Incineration Directive 200/76/EU) Chrzanów , Poland PROJECT DESCRIPTION The purpose of the plant was a combined waste disposal / energy recovery. In-stalled at a large meat processing plant the plant was designed to process approxi-mately 700kg/h per of ...


    By Todaysure Limited

  • On-site industrial wastewater treatment

    Priority pollutant behaviour in on-site treatment systems for industrial wastewaters The majority of wastewaters deriving from the chemical industry consist of aqueous discharges produced during the physico-chemical processing of synthetic mixtures involving operations such as filtration, centrifugation, extraction and/or distillation. The wastewater streams, referred to as ...


    By IWA Publishing

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • What are the best companies for Zero Liquid Discharge Equipment and Technology?

    With an increasing push for environmental protection, many industrial facilities and effluent regulators are making decisions that lessen their impact on the environment and human health. Changes and implementations are constantly being discussed and met both nationally and internationally to change the way industrial facilities discharge waste, and it is important to know which companies are the ...


    By SAMCO Technologies, Inc.

  • Hydrocarbon evaporative emissions & control for automotives

    Even the cleanest and most efficient vehicle on the market today still pollutes the air and otherwise damages the environment. Motor vehicles emit several noxious pollutants which vehicle emissions standards are designed to regulate. Vehicles generally emit Hydrocarbons (HC), Carbon monoxide (CO), Nitrogen oxides (NOx) and Fine airborne particulate matter (PM) as pollutants that require control. ...

  • Water Sustainability

    I7.1  | Water Optimization – 30% Groundwater Use Reduction Tabatha Pellerin, Senior Program Manager, AECOM AECOM assisted the Entergy Lewis Creek gas/coal fired electric power plant with water conservation efforts prompted by a goal of 30% ...

  • Dispersed Phase Inertisation (DPI): A New Technology for the Treatment of Landfill Leachate and Complex Water

    Inertisation is thus far the only technology for the conversion of leachate and contaminated water into an inert product, thereby facilitating handling and disposal in MSW landfills. Introduction One of the most complex aspects of the global management of an MSW landfill or treatment plant is leachate. This liquid comes mainly from the degradation of organic matter, added to other ...


    By Energy & Waste S.l

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you