flue gas mercury Articles

  • Wet Flue Gas Desulfurization System

    Installing the optimum wet flue gas desulfurization technology, B&V Energy is bringing superior multi-pollutant removal technology to the North American utility marketplace. To help make a positive impact on the global environment and to comply with the Clean Air Interstate and Clean Air Mercury Rules, Dayton Power & Light needed to remain in compliance as more stringent air quality ...


    By Black & Veatch Corporation

  • Dosing and mixing of powdered activated carbon for flue gas applications

    Subject: Powdered activated carbon (PAC) is dosed in dry powder form into flue gas for the removal of dioxins, furanes, mercury and other heavy metals from flue gases. Gericke supplies complete solutions for the handling of bulk solids. These complete installations are characterized by their clean, accurate, trouble- and dustfree operation. Application: Furnaces, incinerators, sinter ...


    By Gericke

  • Mercury Control Demonstrations

    C1.1 | Halogens and Sulfur in Coals and their Influence on Co-benefit Mercury Capture Bernhard Vosteen | President, Vosteen Consulting Gmbh Not only the range of the coal mercury content itself, but also the range of the native halogen and sulfur contents in coal are of great influence on co-benefit mercury capture, wet and dry. The ...

  • EVALUATION OF STRATEGIES FOR MERCURY MACT COMPLIANCE

    On December 15, 2003, the United States Environmental Protection Agency (U.S. EPA) proposed a rule with two alternatives to permanently reduce mercury (Hg) emissions from power plants. Under one alternative, which is the focus of this paper, the utilities would install controls known as Maximum Achievable Control Technologies (MACT) under section 112 of the Clean Air Act (CAA). The proposed rule ...


    By Trinity Consultants

  • Pilot-scale demonstration of the hybrid zero-valent iron process for treating flue-gas-desulfurization wastewater: Part I

    The hybrid zero-valent-iron (hZVI) process is a novel chemical treatment process that has shown great potential in previous laboratory and field bench-top scale tests for removing selenium, mercury and nutrients from various industrial wastewaters. In this study, a pilot-scale demonstration was conducted to continuously treat 3.8–7.6 L/min (1–2 gpm) of the flue-gas-desulfurization ...


    By IWA Publishing

  • Fact sheet: EPA mercury rules and power reliability

    New rules from the U.S. Environmental Protection Agency to reduce mercury and other toxic air emissions will affect dozens of antiquated power plants currently operating without pollution controls. These rules have stirred debate in some circles as to whether retrofitting or retiring outdated plants will cause shortfalls in electricity capacity. How will EPA mercury rules influence the ...

  • `Evaluation of Strategies for Mercury MACT Compliance,` presented at the Coal-Gen 2004 conference

    Introduction On December 15,2003, the United States Environmental Protection Agency (U.S. EPA) proposed a rule with two alternatives to permanently reduce mercury (Hg) emissions from power plants. Under one alternative, which is the focus of this paper, the utilities would install controls known as Maximum Achievable Control Technologies (MACT) under section 112 of the Clean Air Act (CAA). ...


    By Trinity Consultants

  • Mercury speciation and distribution in a 660-megawatt utility boiler in Taiwan firing bituminous coals

    Mercury speciation and distribution in a 660-MW tangential-fired utility boiler in Taiwan burning Australian and Chinese bituminous coal blends was investigated. Flue gases were simultaneously sampled at the selective catalytic reduction (SCR) inlet, the SCR outlet, the electrostatic precipitator (ESP) outlet, and the stack. Samplings of coal, lime, bottom ash/slag, fly ash, and gypsum slurry ...

  • Aqueous and vapor phase mercury sorption by inorganic oxide materials functionalized with thiols and poly-thiols

    The objective of the study is the development of sorbents where the sorption sites are highly accessible for the capture of mercury from aqueous and vapor streams. Only a small fraction of the equilibrium capacity is utilized for a sorbent in applications involving short residence times (e.g., vapor phase capture of mercury from coal-fired power plant flue gases). So, dynamic capacity rather than ...


    By Springer

  • EPA mercury rules: Keeping the lights on while removing toxics from our air

    Next week the U.S. Environmental Protection Agency is expected to finalize new rules to reduce mercury and other toxic air emissions that will affect dozens of antiquated power plants currently operating without pollution controls. These rules have stirred debate in some circles as to whether retrofitting or retiring outdated plants will cause shortfalls in electricity capacity. How will new EPA ...

  • Mercury and other trace elements in Ohio River fish collected near coal‐fired power plants: Interspecific patterns and consideration of consumption risks

    Many coal‐fired electric generating facilities in the US are discharging higher loads of Hg, Se, and other chemicals to receiving streams due to the installation of flue gas desulfurization (FGD) air pollution control units. There are regulatory concerns about the potential increased uptake of these bioaccumulative trace elements into food webs. We evaluated the concentrations of As, THg, ...


    By John Wiley & Sons, Ltd.

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Advanced WESP designs assure superior gas cleaning performance

    Nowadays, many industries are facing formidable environmental challenges and there is a growing need for effective, economical gas cleaning and air pollution control equipment. Michael Beltran of Beltran Technologies, Inc. reports on a renewed interest in high-efficiency wet electrostatic precipitators (WESPs) and discusses their importance for controlling sulphuric acid mists and other ...


    By Beltran Technologies, Inc.

  • Why Are CHP Closing All Over The World?

    Burning of coal nowadays has become a big problem. The main reason for this is a rapid increase of mankind. So, China burns half of coal in the world. Since 2000 the share of coal in world energy production has increased from 25 to 30%, and the Chinese economy is responsible for 82% of this growth. In Beijing, it is customary to use ...


    By Lumex Instruments Group

  • Bionomic Boiler MACT Emission Control Technologies

    Introduction Bionomic Industries' extensive line of field-proven, cost effective wet and dry scrubber and electrostatic technology choices can easily and economically help you achieve compliance with EPA Boiler MACT regulations for hydrochloric acid, particulate or mercury control. Bionomics' wide range of equipment enables selection of the best control technology to remove a specific or ...


    By Bionomic Industries Inc.

  • OTM 17: Determination of Metal Concentrations Using Filters and Solid Sorbents in XRF Analyisis case study

    Eli Lilly and Company (Lilly) operates a waste incineration system located at the Tippecanoe Laboratories in Lafayette, Indiana. This incinerator system includes an Xact multi-metals continuous emissions monitoring system (Xact-CEMS, manufactured by Cooper Environmental Services, LLC) for demonstrating attainment with the Hazardous Waste Combustor MACT for semi-volatile metals, low-volatile ...

  • Minimization of Major Air Pollutants from Sewage Sludge Fluid Bed Incinerators

    ABSTRACT Emissions of major air pollutants including carbon monoxide (CO), nitrogen oxides (NOx) and mercury (Hg) were studied at two sewage sludge fluidized bed combustion (FBC) plants. Both the North West Bergen (NWB) County Utility Authority and the Little Miami (LM) plants have air pollution control systems (APCS) that are of the wet type. Various operating conditions such as temperature, ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you