flue gas meter Articles

  • Dosing and mixing of powdered activated carbon for flue gas applications

    Subject: Powdered activated carbon (PAC) is dosed in dry powder form into flue gas for the removal of dioxins, furanes, mercury and other heavy metals from flue gases. Gericke supplies complete solutions for the handling of bulk solids. These complete installations are characterized by their clean, accurate, trouble- and dustfree operation. Application: Furnaces, incinerators, sinter ...


    By Gericke

  • An analysis of extinction coefficients of particles and water moisture in the stack after flue gas desulfurization at a coal-fired power plant

    Two important factors that affect in-stack opacity—light extinction by emitted particles and that by water moisture after a flue gas desulfurization (FGD) unit—are investigated. The mass light extinction coefficients for particles and water moisture, kp and kw, respectively, were determined using the Lambert-Beer law of opacity with a nonlinear least-squares regression method. The ...

  • Ford Motor Co. Ltd reduce emissions by 5.1% on gas fired boiler plant using Maxsys Fuel Systems.

    As part of an ongoing objective to reduce emissions and conserve energy at the Ford Motor Company’s Dunton Technical Centre, Maxsys Fuel Systems have been fitted to the boiler plant, helping the company to achieve over 5% reduction in gas usage with a commensurate reduction in emissions. The Energy Committee at Dunton decided to investigate ways of reducing gas usage by improving ...


    By Maxsys Fuel Systems Ltd

  • Magnetic driven pumps in Molten sulphur service case study

    MD51EFDKR-3U88/06C with NORD SK12XZ-140TC and Reliance 2 HP, TEFC-XE motor Pumping Molten Sulphur is most challenging. Sulphur temperatures must be controlled within a 120-155o C range. Outside this temperature sulphur solidifies. Sulphur has a distinct odour and is highly corrosive in the presence of moisture. Where leakage from common packed style pumps was unacceptable, a ROTAN ...


    By DESMI A/S

  • 4.5 MWe Refuse Derived Fuel to Energy Plant Case Study

    This 4.5 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant has a capacity of 24 MW thermal and rated at 4.5 MWe producing 35,476MWh of green electricity per year, 100% of which is exported to the grid. The fuel used is segregated biomass from a commercial and industrial waste collection business. The fuel is produced by removing some of the recyclable material ...


    By Biomass Power Limited (BPL)

  • 2 MWe Biomass Power Plant Case Study

    This 2 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in September 2007. The plant has a capacity of 11 MW thermal and rated at 2MWe producing 15,700 MWh of green electricity per year, 100% of which is exported to the grid. The fuels used are from forestry and agricultural residues, wet woodchips, compost oversize, straw and miscanthus, ...


    By Biomass Power Limited (BPL)

  • Tuning Your Boiler for EPA Boiler MACT Compliance

    The EPA’s Boiler MACT regulations are heating up. Boiler MACT is an EPA rule to limit hazardous air pollutants (HAP) from commercial and industrial boilers and process heaters. Originally proposed in 2011 as a mandate driven by the Clean Air Act,  the rules are Area Source Boiler MACT 40 CFR 63, subpart JJJJJJ for smaller boilers (stores, hotels, apartments, ...


    By Sierra Instruments, Inc.

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Sakhalin energy utilizes Thermo Scientific SampleManager LIMS for largest Russian LNG project ever - case study

    Sakhalin Energy is bringing onstream one of the largest integrated oil and gas projects in the world in Russia's Far East. The Sakhalin II Project combines partnership incorporating the recovery, production and transportation of oil and liquefied natural gas (LNG). Sakhalin Energy standardized on Thermo Scientific SampleManager LIMS (Laboratory Information Management System) for use in its main ...

  • Can we bury the carbon dioxide problem?

    Seriously — carbon capture and storage could be a game-changer. Mention “carbon capture and storage” — the process of trapping carbon dioxide produced in fossil-fuel burning or other industrial processes and burying it underground — in polite company, and you’re likely to be pounced on. It’s absurdly expensive. It can never be rolled ...


    By Ensia

  • Water Sustainability

    I7.1  | Water Optimization – 30% Groundwater Use Reduction Tabatha Pellerin, Senior Program Manager, AECOM AECOM assisted the Entergy Lewis Creek gas/coal fired electric power plant with water conservation efforts prompted by a goal of 30% ...

  • Shipping Emissions - The Environmental Case for Sea Water Scrubbing

    The romantic image of a luxury liner cruising blue seas amid blue skies and trailing a plume of smoke is too close to the truth for comfort. The emissions from shipping make an increasingly conspicuous contribution to air quality, health and environmental problems of Europe, and indeed, the world. Yet an effective and safe technology to dramatically reduce these emissions is being discouraged, ...


  • Performance of the low-emission flare

    Job report / Elbisgraben (Bale / Switzerland) The summer of 1992 had finally arrived. The 5MW low emission furnace in the district heating station Liestal was ignited, supplied with landfill gas from Elbisgraben landfill. Since then the plant has been running continuously and the comprehensive measurements taken, verify that all targets aimed at have been achieved: plant ...


    By Hofstetter BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you