fluid pump Articles

  • Fiction EHC fluid resistivity

    Since the mid 1960's turbine hydraulic fluid systems have been using Fire Resistant Fluid (FRF) to control their turbine inlet valves. It is a known “FACT” that low fluid resistivity adversely affects the internal components of servo valves within the hydraulic fluid system. Root cause analysis studies conducted by numerous agencies have determined ...


    By Barry Sibul Company

  • Going overboard - treating completion fluids

    Treating Completion Fluids An oil company had employed CETCO Oilfield Services to treat their well flow back fluids on several occasions. Since our highly specialized equipment and personnel had proven successful time and time again, when the oil company completed two more wells, they once more turned to CETCO Oilfield Services to treat the completion fluids. The two wells produced 2,790 BBL of ...


    By CETCO Energy Services

  • Emsco/Bomco/Gardner Denver/NOV Mud Pump Fluid End Expendables

    Fluid End Expendables & Accessories Liner: hy-chrome liner, zirconia liner, ceramic liner, chrome-plated liner, hardned liner Piston: nitrile rubber piston, supreme piston, polyurethane piston, urethane bonded piston, green duo piston, blue lightning piston, white lightning piston Valve & Seat: ...

  • Computation Fluid Dynamic Modeling of a Proposed Influent Pump Station

    Traditionally pump intake hydraulics have been investigated using scale physical hydraulic models. Computational fluid dynamics (CFD) is a rapidly improving technology that in some cases can be used as a cost or time effective alternative to traditional physical model methods for evaluation of pump intake hydraulics. This paper presents a case study on the use of CFD modeling to re-evaluate and ...

  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • Fluid mixing is ideal way of multi component production

    Liquids can be mixed manually and a mechanical way. Mixing is necessary at dissolution of hard substances in liquid, at liquid dissolution in liquid, when carrying out many works. The mixing method of liquids in a stream has a set of advantages under a method of periodic mixing, especially, if it passes just before a pouring stage. The combination of high-precision measuring devices, digital ...


    By GlobeCore Blending

  • Fluid control saves $1 million at automotive supplier

    The Problem: A Michigan wheel manufacturer was facing numerous problems associated with the quality and maintenance of their coolant and cleaners. These problems included downtime quality control rejections due to corrosion of parts, pumps clogging with biological matter, and operator complaints of coolant odors. Concurrently, the plant needed to reduce fluid-related costs and improve data ...

  • Fearless flow back - treating completion fluids & acid flow backs

    An oil company completed a well and CETCO Oilfield Services was there to treat the flow back fluids. During the flow back, it was necessary for the oil company to continue normal drilling operations. Deck space on the structure was at a premium for the oil company, who simultaneously continued drilling while flow back fluids were being treated. CETCO Oilfield Services’ proven technology and ...


    By CETCO Energy Services

  • Pump it up

    Aligning itself with a major equipment supplier and dealer helps the company access the tools and expertise it needs without risking too much capital. Aquatech is the distributor for Godwin Pumps of America in Ontario, Nunavut, Newfoundland and Eastern Labrador, all resource-rich territories. A recent purchase of Godwin by ITT Corporation has expanded the lineup of mine sector pumps. The company ...


    By Aquatech Dewatering Company

  • Avoiding Pump Problems

    As with any pump system, there are some basic components involved — a driver, the impeller/pump and the transmission. The basic difference is that instead of a flexible coupling or gear train, the transmission is a hydraulic system. The hydraulic system is composed of a hydraulic pump, hydraulic motor, supply tank, filtration method, cooling method and transfer ...


    By Griffin Dewatering

  • Replacement of a Multiple Hearth by a Fluid Bed Incinerator - The Greensboro Experience (PDF - File size 50K)

    ABSTRACT The incinerator at the T.Z. Osborne Plant in Greensboro, North Carolina burns sludge from its own Waste Water Treatment Plant and sludge pumped from the nearby North Buffalo plant. The two plants have a combined capacity of 36 million gallons per day of wastewater. In 1992, the Osborne plant concluded a study evaluating its options for future municipal sewage sludge disposal. The ...

  • Getting ahead of the Caribou - pitdry process—innovative solidification solution for spent drilling fluids

    An oil company has been producing oil and gas in British Columbia’s Southern Foothills since 1992. The operator has continuously invested in the area and recently opened up new gas producing wells northwest of Fort St John, the largest city in the northeast region of British Columbia. The new wells are situated 4,600 feet above sea level in a rigid mountain terrain. The viable way to connect the ...


    By CETCO Energy Services

  • Submersible Pumps - The Airlift Principle

    The Air lift principle has been around for many years. In fact it was first conceived in 1797 by the German engineer Carl Emanuel Löscher and is one of the most simple and basic ways to pump water and other fluids. Not only is the principle simple, there is not much to go wrong. Airlift in its simplest form had its limitations, but recent developments have enabled far more ...


    By Brumby Pumps

  • Viscous Pumping in Focus

    The performance of a pump is influenced when it handles viscous fluids such as crude oil. For the configuration and design of pumps, this is key. In the industry, pump performance curves are developed by testing with water at temperatures around 25°C and corrected to a specific gravity of one. Engineers use this standard so that they have comparable measurement values around the ...


    By Sulzer

  • The small pumps with a big attitude

    Cardev International Ltd supplies a comprehensive range of environmental products commonly used in the maintenance and on-site recycling of industrial cutting fluids and oils, particularly hydraulic and turbine oils. Cardev’s standard range of OSCAR rigs incorporate several sizes of Mono M range pumps, including 110 volt systems for industrial recycling, and 24 volt systems mounted on the back of ...


    By NOV Mono - Mono Pumps Ltd

  • Horsepower on the pump curve

    Now that the head capacity relationship along the X and Y axes of the pump curve has been established in Part 1 of this series, the pump curve can be used to determine the amount of horsepower required to meet the head and capacity requirements for the job. Horsepower is a unit of power equal to 550 foot pounds per second or 746 watts. Water horsepower is the minimum power ...

  • Pumping at Subzero Temperatures

    Pumping of cryogenic (low-temperature) products is important for many applications, especially in the field of liquefied natural gas (LNG). The Sulzer J-unit is a special sealing system for cryogenic pumps. It was invented more than 60 years ago. The evolution of the J-unit design since then has been impressive and has now resulted in a recently filed patent application by Sulzer. ...


    By Sulzer

  • Understanding Pump Cavitation

    Cavitation is a major problem in the chemical industry because it affects a basic tool, the centrifugal pump. A sudden increase in the velocity of the pumped liquid reduces the inlet pressure, sometimes below the vapor pressure.The result is formation of gas and bubbles. Detecting the signs of cavitation, and correctly identifying and understanding the type of cavitation present, can help an ...

  • VFD for pumping systems

    Pumping systems account for nearly 20% of the world's electrical energy usage. In some process plants, the VFD for pumps and fans together account for between 50% and 80% of the total electricity used. Very rarely have I come across pumps operating with fully open discharge valves. The same is the case for fans with dampers. ...


    By Variable Frequency Drives

  • Effects of Slurry pump expeller

    Expeller not only with sealing effect, but also can serve to reduce the axial force. The axial force in the slurry pump is mainly caused by the liquid pressure acting on the impeller and the rotating part of the composition of gravity. So it is easy to know, in the same identical performance parameters, slurry pump axial force is stronger ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you