formaldehyde emissions monitoring Articles

  • Toxic formaldehyde very common in homes

    EMSL Analytical provides formaldehyde testing solutions for industry and the public. Formaldehyde can be found in most homes across the country. The chemical is commonly used to manufacture numerous building materials and household items. The most significant source of formaldehyde in most homes is from pressed wood products made with formaldehyde containing adhesives. According to the EPA, “High ...


  • Embalmers risk dangerous exposure to Formaldehyde

    Embalmers can be at risk of dangerous exposure to Formaldehyde. ...


    By PPM Technology

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Dangers of Formaldehyde used as adhesive in manufacture of wood-based panel products.

    Formaldehyde is a chemical widely used to manufacture building materials and various household products.  Wood based panels can emit small amounts of formaldehyde to the air and each panel type has a product standard governing the testing and certification of that product for formaldehyde emissions. Anyone involved in the manufacture of these products could be exposed to formaldehyde in ...


    By PPM Technology

  • Gas turbine compliance emissions test case study

    CKwas retained by Lake Road Generating Company, LP (Lake Road) to conduct a compliance emissions test program on three combustion turbine and heat recovery steam generators (CT/HRSG). The purpose of this program is to demonstrate that emissions from the CT/HRSGs are within the emission limits specified in the operating permit issued by the Connecticut Department of Environmental Protection ...


    By CK Environmental, Inc.

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

  • A Case Study in Implementation of the National Emission Standard for Hazardous Air Pollutants for the Portland Cement Industry at a Major Source

    The regulations at 40 CFR 63, Subpart LLL are commonly known as PC MACT because the rule establishes the maximum available control technology for hazardous air pollutants (HAPs) from portland cement plants in the United States. There are 188 HAPs specified in Section 112 of the Clean Air Act Amendments of 1990. Two classifications of HAP emitters are specified in 40 CFR 63. Major sources of HAPs ...


    By Trinity Consultants

  • A Method of Assessing Air Toxics Concentrations in Urban Areas Using Mobile Platform Measurements

    ABSTRACTThe objective of this paper is to demonstrate an approach to characterize the spatial variability in ambient air concentrations using mobile platform measurements. This approach may be useful for air toxics assessments in Environmental Justice applications, epidemiological studies, and environmental health risk assessments. In this study, we developed and applied a method to characterize ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Sonic nozzles for gas calibrators, when simplicity provides accuracy!

    Gas analyser’s calibration is a task required in many applications according to either legislation or quality systems management. This is the case for Air Pollution Monitoring or Continuous Emissions Monitoring devices installed in cabinets, for continuous analysis in remote locations. Measurements in traces range are performed and analytical devices specifications need to be validated and ...


    By LNI Swissgas

  • Nature’s Own - Biofiltration process offers promise of (near) energy-free pollution abatement

    A filter could be described as any substance through which liquid is passed to remove suspended impurities. Although a “biofilter” is actually not a filter, “biofiltration” is on the threshold of finding a market as a compliance solution for air pollution regulations after a number of false starts. Biofilters have long been used as a means for reducing objectionable odors in Germany, the ...


  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Greening the Built Environment

    ASTM Standards and Products Form the Foundation of Sustainable Construction Efforts Today, a major focal point for the worldwide building industry is the growing demand for sustainable construction. Sustainable, or “green,” construction is focused on the more effective use of resources and ultimately the creation of healthier, energy efficient, more environmentally ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you