frp tank Articles

  • Award Winning Large Diameter FRP Stacks For Magnesium Extraction Plant

    When Fabricated Plastics Limited of Maple (Toronto), Ontario, Canada was awarded a contract by a world renowned Mining/Metallurgical Company, it proved to be a chance to exhibit their engineering excellence in several ways. First they had to demonstrate that their proposed use of Fibreglass Reinforced Plastic (FRP) was clearly the material of choice in competition with other materials. Then they ...


    By Fabricated Plastics Limited

  • Fiberglass water wheels save energy and maintenance costs at water treatment plant (FRP)

    City of Kansas City, MO Over the past 20 years the Kansas City Water Plant has replaced 38 motor and chain drives in their primary and secondary mixing tanks with one 40 horse blower.  The blower supplies air to 40 fiberglass drive wheels that are directly in line with mixing paddles.  Each 13' diameter Water Wheel has eight half round buckets that when filled with air will ...


    By Monoxivent

  • 3-K-Series Tellerette® Packing for HCl removal in a Crossflow Scrubber

    A number of sources in the wastewater treatment process such as the headworks, aeration tanks, settling tanks andd ewatering press can produce high-intensity odors fromgaseous sulfide emissions. The most common sulfides are hydrogen sulfide (H2S) and methyl mercaptan (CH3SH.)The highlighted installation was for a major municipalityin the southeast and utilizes our new high efficiency ...

  • 3k-tellerette packing-hclremoval-crossflow-scrubber-302

    A number of sources in the wastewater treatment process such as the headworks, aeration tanks, settling tanks and dewatering press can produce high-intensity odors from gaseous sulfide emissions. The most common sulfides arehydrogen sulfide (H2S) and methyl mercaptan (CH3SH.)The highlighted installation was for a major municipality in the southeast and utilizes our new high efficiency 3-K ...

  • Food and Beverage - L&S Sweetener Company - case study

    Application L&S Sweeteners of Honey Brook, Pennsylvania, had wastewater disposal issues resulting from the cleaning process for trucks bearing various liquid sweeteners, which must be cleaned between shipments per USDA requirements. Wastewater Description The company’s wastewater was derived from the cleaning of liquid sugar products from tank ...


  • Chemical Industry: Sale of by-Product HCl Covers Cost of Emission Control System Problem Case Study

    Some of the specialty chemical processes at a major chemical manufacturer’s plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low level of ...


    By CR Clean Air Group, LLC

  • Sale of by-Product HCl Covers Cost of Emission Control System

    Problem: Some of the specialty chemical processes at a major chemical manufacturer's plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low ...


  • Case History - Sale of By-product HCl Covers Cost of Emission-Control System

    Problem: Some of the specialty chemical processes at a major chemical manufacturer's plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low ...


  • Plasti-fab head gages are durable enough to withstand gunshots and vandalism

    Plasti-Fab Gages are primarily used in secluded, often rural settings, such as flumes, weirs, reservoirs, basins, lagoons, waterways and other applications. In these locations they have year-round, sustained exposure to all of the natural elements. The PlastiFab ...


    By Plasti-Fab, Inc.

  • Case study: Roager Bioenergi

    Substrate: Energy crops, animal manure, other organic material Biogas flow: 1.200 Nm3/h H2S inlet: 2.000 ppm H2S H2S outlet: 50 ppm H2S Year of Installation: 2011 Roager/Lundsby Bioenergi is located in the southern part of Denmark. It is a unique biogas plant as the input is a mixture of animal ...


    By Biogasclean A/S

  • Case study: Maabjerg Bioenergy

    Substrate: Animal manure and food waste Biogas flow: 3.600 Nm3/h H2S Inlet: 3.000 ppm H2S Outlet: 80 ppm Year of installation: 2012 The Maabjerg plant is a collaboration between agriculture, municipalities and the district heat station and is situated in the northern part of Denmark. When in full ...


    By Biogasclean A/S

  • Commercial Twin Alternating Water Softener, Nicaragua

    INTRODUCTION In July 2013, Pure Aqua designed and manufactured a commercial twin alternating water softener with 30” FRP tanks, 30” brine tank and Aquamatic valves for a major company in Nicaragua. Feed water to the softener was well water. Its purpose was to lower the hardness in the water to ...


    By Pure Aqua, Inc.

  • Polymer Concrete for Structural Restoration and Corrosion Protection of Concrete Support Columns

    Introduction A large copper mine and refinery in the western United States had a dilemma. Their cell house, which contains over 1,500 cells, each holding more than 20,000 gallons of electrolyte, had experienced severe corrosion and structural degradation of the support columns for the tanks. These columns support the cells in their solvent extraction and electrowinning process. This ...


    By Sauereisen Inc.

  • Taos, New Mexico SORB 33® Arsenic Removal Case Study

    Site BackgroundThe Town of Taos, located in northern New Mexico and with a population of 8,000 was awarded an arsenic removal treatment system as part of the US EPA’s Arsenic Removal Demonstration Program in January, 2005. The town had a new well, storage tank and booster pump system that was scheduled to be connected to the Town’s distribution system and placed into service only after the ...


    By De Nora Water Technologies

  • Chemical Industry: HCL System Exceeds Current Regulations Emission control meets requirements while recovering by-product for sale Case Study

    Chemron manufactures high-quality specialty chemicals and surfactants for personal care products, industrial, institutional, oil field, mining, coatings, lubricants and water treatment. Some of the operations result in the creation of hydrochloric acid with high variable rates. As expressed by Bill Frost, of Chemron: “Chemron maintains a strong environmental commitment, which views ...


    By CR Clean Air Group, LLC

  • Challenging Engineering Design and Ultra Pure Fabrication for the Semi-Conductor Industry

    Challenging Engineering Design and Ultra Pure Fabrication for the Semi-Conductor Industry The semi-conductor industry is one of the most demanding in terms of its requirements from suppliers. Only a few companies worldwide have the expertise, the facilities, the knowledge and the experience to be considered when new plant equipment is put out for bidding. Similar to the pharmaceutical and food ...


    By Fabricated Plastics Limited

  • KLa Systems Jet Mixers for Anaerobic Treatment Process Case Study

    The Challenge Many food processing industry wastewaters contain high concentrations of readily degradable organic material and over the past twenty years the implementation of anaerobic treatment processes has gained popularity as the preferred first stage biological process. Anaerobic processes have many advantages over aerobic processes and the two key ones are very low production of ...


    By KLa Systems, Inc.

  • KLa Slot injector™ Aeration system assists cheese & Whey production plant solve its Nitrogen discharge challenge - Case Study

    The Challenge A gourmet cheese, whey protein, and lactose production facility located in the Midwest had been utilizing a land application system for effluent discharge for over 40 years. Using a combination of ridge and furrow and spray irrigation, the plant had many years of success applying their wastewater to the land. However, as the gourmet cheese products gained in popularity along ...


    By KLa Systems, Inc.

  • Charting economic climate

    The economic climate affects our day-to-day lives. Work activities are intricately interconnected with social well-being which in turn effects family harmony and trickles on down to impact personal wherewithal. Still, 'climate' is what it is. There is nothing any of us alone can do about it. At the same time, however, how we think about it tends to shift the reality we experience day to day. ...


    By Universal Pultrusions LLC

  • Material Matters - An Engineering and Fabrication Challenge

    The world of engineering is a very large and diverse universe which ranges from electrial, mechanical and civil to environmentaland structural. It is true that their varied disciplines have many qualities in common, e.g. the mixture of logic, creativity, awareness of cost /benefit ratio etc., are requirements of all engineering. It is equally true that each discipline has its own mind set, ...


    By Fabricated Plastics Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you