ftir sample Articles

  • FTIR Spectroscopy

    Fourier Transform Infrared (FTIR) Spectroscopy bases its functionality on the principle that almost all molecules absorb infrared light. Only the monatomic (He, Ne, Ar, etc) and homopolar diatomic (H2, N2, O2, etc) molecules do not absorb infrared light. Molecules only absorb infrared light at those frequencies where the infrared light affects the dipolar moment of the molecule. In a molecule, ...


    By CIC Photonics, Inc.

  • Diffuse reflectance spectroscopy using a handheld FTIR

    As has been previously discussed (1), FTIR spectroscopy is emerging as a technique that can be effectively used for applications and/or in locations that heretofore would be considered too demanding. The development of portable FTIRs, and more recently handheld FTIRs, is significant because it enables this powerful analytical technique to solve problems for a whole range of new applications, both ...


  • FTIR becomes best option for multi-gas emissions

    Globally, the number of industrial processes and emissions being monitored with Gasmet’s FTIR multi-gas technology has increased enormously in recent years as process managers exploit the benefits of being able to monitor a wide range of gases simultaneously and with minimal maintenance and calibration requirements. Gasmet CEMS (continuous emissions monitoring systems) are used for ...


    By Gasmet Technologies Oy

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • FTIR emissions analyser helps manage UK power station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Quantitech Ltd

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical ...


    By Gasmet Technologies Oy

  • FTIR gas analyzers support management of fire at UK waste facility

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents.  Arrangements have been made in England to bring together experts from the Environment ...


    By Gasmet Technologies Oy

  • Optical couplers: key hardware for high quality FTIR spectroscopy

    Description Optical couplers are used to take the light coming from the source of a FTIR and route it through the sampling accessory and into the FTIR detector. This is an essential process in the effective use of the FTIR spectrometer. Therefore, optical couplers play an essential role in the proper use and maintenance of a FTIR system. Recognizing the importance of optical couplers ...


    By CIC Photonics, Inc.

  • FTIR Emissions Analyser helps manage UK Power Station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Gasmet Technologies Oy

  • Cerex introduces the new AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • Comparing TGA, FTIR and fixed filter infrared analyzers for measuring soot levels in in-service lubricants

    Measuring soot in diesel engine oil has become more important as soot levels get higher due to exhaust gas recirculation. As soot isone of the key indicators for the condition of the oil, diesel engine maintenance programs performing regular soot checks can realize cost savings by extending drain periods and reducing used oil disposal. TGA (Thermal Gravimetric Analysis) is the traditional method ...


    By Spectro Scientific

  • Relationships among loss-on-ignition and unburned carbons, and the FTIR photoacoustic spectra of fly ashes

    Loss-on-ignition (LOI) and unburned carbon (UC) concentrations of fly ash are two very important indices for evaluating combustion efficiencies of boilers. They are also very important factors affecting the utilisation of fly ashes. The LOI and UC of five fly ash samples collected from different power plants were analysed. The Fourier-transform infrared (FTIR) photoacoustic spectra (PAS) of these ...


    By Inderscience Publishers

  • Exoscan FTIR instrument system can easily be used in the lab or taken to the field for routine analysis.

    Infrared spectroscopy has long been recognized as a selective and sensitive technique for analysis and characterization of surfaces. From material identification to quantitative analysis, infrared analyses can establish if a surface is composed of the correct material, has the proper coating thickness, is free of contaminants, is properly cured, or has the correct properties for the next step in ...


  • FTIR spectroscopy as a novel approach towards providing effect‐based endpoints in duckweed toxicity testing

    Traditional duckweed toxicity tests only measure plant growth inhibition as an endpoint, with limited effects‐based data. This study aimed to investigate whether Fourier‐transform infrared (FTIR) spectroscopy could enhance the duckweed (Lemna minor L.) toxicity test. Four chemicals (Cu, Cd, atrazine, and acetochlor) and four metals‐containing industrial wastewater samples were tested. After ...


    By John Wiley & Sons, Ltd.

  • Application of new least-squares methods for the quantitative infrared analysis of multicomponent samples

    Improvements have been in previous least-squares regression analyses of infrared spectra for the quantitative estimaiton of conecntratons of multicomponent mixtures. Spectral baselines are fitted by least-squares methods, and overlaping spectral features are accouted for in the fitting procedure. Selection peaks above a threshold value reduces computation time and data storage requirements. Four ...


    By CIC Photonics, Inc.

  • Fourier transform infrared spectroscopic investigation of humic substance samples of different origin and typology supported by chemometric tools

    In this paper 198 FTIR spectra of humic substance (HS) extracted from lake, marine sediments, soils and by Antarctic seawater were examined by Principal Component Analysis (PCA), Independent Component Analysis (ICA) and Two-dimensional Mapping (2DMAP) to identify the compositional and structural characteristics which characterise the typologies of samples examined and which are hardly detectable ...


    By Inderscience Publishers

  • New ASTM Test Method Offers Quick and Easy Oil and Grease Measurement for Water and Soil Samples

    Onsite Field Measurement of Oil and Grease A quick and easy field analysis method for determining oil and grease concentration levels is important for both offshore oil platforms and soil remediation sites.. Prior to the Montreal Protocol, infrared (IR) analysis using Freon as an extraction solvent was a widely used field and laboratory method. In 1999, the U.S. EPA promulgated Method 1664A ...


    By Spectro Scientific

  • Infrared spectroscopy of human bone marrow: evidence of structural changes during acute leukemia

    Fourier transform infrared (FTIR) spectroscopy was explored as a means to distinguish newly diagnosed of acute lymphoblastic leukemia from disease free bone marrow samples. Characteristic bands alterations were identified in both healthy and diseased samples arising from cellular protein, lipid and DNA. There were specific changes that affected the secondary structure of proteins that appeared in ...


    By Inderscience Publishers

  • Characterisation of a bioassay using the marine alga Dunaliella tertiolecta associated with spectroscopic (visible and infrared) detection

    This paper describes an ecotoxicological test using the alga Dunaliella tertiolecta associated with visible (VIS) and infrared (FTIR) spectroscopic detection. The estimation of toxicity is performed by measuring the cell density at 432 nm instead of 665 nm the results are comparable with those obtained by conventional visual or automatic estimation of celle density. FTIR spectroscopy gives an ...


    By Inderscience Publishers

  • Comparative in situ PET biodegradation assay using indigenously developed consortia

    A soil burial test was carried out to evaluate the biodegradation of polyethylene terephthalate under natural environment for a period of six months in presence of three different indigenously developed bacterial consortia. These consortia comprised of potential polymer-degrading bacterial cultures isolated from various waste disposal sites. The comparative biodegradation of PET samples in ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you