ftir spectroscopy Articles

  • FTIR Spectroscopy

    Fourier Transform Infrared (FTIR) Spectroscopy bases its functionality on the principle that almost all molecules absorb infrared light. Only the monatomic (He, Ne, Ar, etc) and homopolar diatomic (H2, N2, O2, etc) molecules do not absorb infrared light. Molecules only absorb infrared light at those frequencies where the infrared light affects the dipolar moment of the molecule. In a molecule, ...


    By CIC Photonics, Inc.

  • Diffuse reflectance spectroscopy using a handheld FTIR

    As has been previously discussed (1), FTIR spectroscopy is emerging as a technique that can be effectively used for applications and/or in locations that heretofore would be considered too demanding. The development of portable FTIRs, and more recently handheld FTIRs, is significant because it enables this powerful analytical technique to solve problems for a whole range of new applications, both ...


  • Using FTIR spectroscopy to measure hydrocarbon pollution in water

    According to the World Health Organization (WHO) and UNICEF’s 2015 Progress on Sanitation and Drinking Water report almost 700 million people around the world don’t have access to clean drinking water [1]. Poor water quality is beginning to return to the developed world too. The strain of population growth, intensified agricultural practices and continued industrial expansion have are ...


    By Specac Limited

  • Optical couplers: key hardware for high quality FTIR spectroscopy

    Description Optical couplers are used to take the light coming from the source of a FTIR and route it through the sampling accessory and into the FTIR detector. This is an essential process in the effective use of the FTIR spectrometer. Therefore, optical couplers play an essential role in the proper use and maintenance of a FTIR system. Recognizing the importance of optical couplers ...


    By CIC Photonics, Inc.

  • Evaluation of FTIR spectroscopy as a maturity index for herbicide-contaminated composts

    This paper analyses the use of Fourier Transform Infrared (FTIR) spectroscopy as a maturity index for herbicide-contaminated green wastes composts. Four in-vessel composting systems were set-up with Compost A constituting of uncontaminated grass clippings and Composts B, C and D contaminated with atrazine, 2,4-D and tordon 101 respectively. The physicochemical properties of the composts were ...


    By Inderscience Publishers

  • High-sensitivity, fast-response monitoring of PFC and abatement tool emissions by FTIR spectroscopy

    Semiconductor fab plants are faced with real-time monitoring and reduction of their PFC emissions to meet SEMI Environmental, Health and Safety (EHS) requirements. In some cases emissions are continuous, while in other cases they are intermittent or random. Also, in-situ real-time process control is becoming a critical element of yield enhacement. Solution: FTIR Spectroscopy In-Situ ...


    By CIC Photonics, Inc.

  • FTIR spectroscopy as a novel approach towards providing effect‐based endpoints in duckweed toxicity testing

    Traditional duckweed toxicity tests only measure plant growth inhibition as an endpoint, with limited effects‐based data. This study aimed to investigate whether Fourier‐transform infrared (FTIR) spectroscopy could enhance the duckweed (Lemna minor L.) toxicity test. Four chemicals (Cu, Cd, atrazine, and acetochlor) and four metals‐containing industrial wastewater samples were tested. After ...


    By John Wiley & Sons, Ltd.

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Your new favourite analysis method: spectroscopy highlights

    By 2020 the process spectroscopy sector is anticipated to be worth billions by 2020. What does this mean for Fourier Transform Infrared spectroscopy (FTIR)? The versatile technique is taking over due to how quick, easy and accurate its analysis is. Below are some ...


    By Specac Limited

  • Quantitative analysis of automotive exhaust gas by Fourier Transform Infrared spectroscopy

    For monitoring gaseous emissions from muffler, instruments presently used can only measure quantitatively a given pollutant. Fourier Transform Infrared (FTIR) spectroscopy can provide quantitative and online real time analysis. Calibration of our FTIR spectrometer with CO, CO2, NO, NO2 and N2O was done and the limits of quantification obtained were shown to be as low as 80 ppm. The variation ...


    By Inderscience Publishers

  • Optimising next-generation lithium ion batteries with infrared spectroscopy

    Lithium batteries have become the mainstay of modern portable electronics, providing a reliable power source to run mobile phones, laptop computers and electric vehicles. Lithium technology is now even being developed on a large scale to provide electricity storage to supplement the National Grid during peak demand [1]. The issue with lithium batteries remains the same – energy density ...


    By Specac Limited

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical ...


    By Gasmet Technologies Oy

  • FTIR meets Fire Testing needs for toxic gas analysis - Case study

    One of the most dangerous aspects of a fire is the toxic gases that can arise from the process of combustion. To save lives and develop safer materials for airplanes, trains, and buildings, it is vital to identify and measure the gases that are released when products and materials are burning. The BASF Fire Technology Laboratory in Ludwigshafen, Germany, conducts fire testing on materials to ...


    By Gasmet Technologies Oy

  • Infrared spectroscopy of human bone marrow: evidence of structural changes during acute leukemia

    Fourier transform infrared (FTIR) spectroscopy was explored as a means to distinguish newly diagnosed of acute lymphoblastic leukemia from disease free bone marrow samples. Characteristic bands alterations were identified in both healthy and diseased samples arising from cellular protein, lipid and DNA. There were specific changes that affected the secondary structure of proteins that appeared in ...


    By Inderscience Publishers

  • FT-IR spectroscopy as a tool for identification of apoptosis-induced structural changes in A549 cells treated with PM 701

    Fourier transform infrared (FTIR) spectroscopy has been found useful for detecting apoptotic changes induced in human lung cancer cells (A549) that treated with PM 701 (natural product) in tissue culture level. Characteristic bands alterations were identified in the apoptotic cells arising from cellular protein, lipid and DNA, there were specific changes that affected the secondary structure of ...


    By Inderscience Publishers

  • On the Application of Open-Path Fourier Transform Infrared Spectroscopy to Measure Aerosols: Observations of Water Droplets

    ABSTRACT This paper proposes the application of Open-Path Fourier Transform Infra-Red (OP-FTIR) spectroscopy to measure aerosols. A preliminary experiment conducted in a standard shower chamber generated a condensed water aerosol cloud. The OP-FTIR beam acquired spectra through the ...


    By Arcadis

  • Relationships among loss-on-ignition and unburned carbons, and the FTIR photoacoustic spectra of fly ashes

    Loss-on-ignition (LOI) and unburned carbon (UC) concentrations of fly ash are two very important indices for evaluating combustion efficiencies of boilers. They are also very important factors affecting the utilisation of fly ashes. The LOI and UC of five fly ash samples collected from different power plants were analysed. The Fourier-transform infrared (FTIR) photoacoustic spectra (PAS) of these ...


    By Inderscience Publishers

  • Exoscan FTIR instrument system can easily be used in the lab or taken to the field for routine analysis.

    Infrared spectroscopy has long been recognized as a selective and sensitive technique for analysis and characterization of surfaces. From material identification to quantitative analysis, infrared analyses can establish if a surface is composed of the correct material, has the proper coating thickness, is free of contaminants, is properly cured, or has the correct properties for the next step in ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you