fuel analysis spectrometer Articles

  • Analysis of alternative fuels

    The use of alternative fuels in the cement and building materials industries is becoming increasingly important. Alternative fuels enable cement manufacturers to control production costs and improve environmental performance – two very significant benefits for one of the world’s most energy intensive industries. If international targets for the reduction of CO2 emissions are to be met, then the ...


    By PANalytical

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Biodiesel Analysis with Mid Infrared - From Feedstock to Fuel

    Introduction The biofuels industry is growing rapidly and so is the need for analysis to ensure quality product. The parameters for quality biodiesel require different types of instruments and measurement systems, such as gas chromatographs (GC), titrators, centrifuges, infrared spectrometers... Although claims are out there for the analyzer that will do it all, unfortunately there is no one ...


    By Spectro Scientific

  • InfraSpec VFA-IR Spectrometer for Biodiesel Blend Measurements

    Synopsis: Simple, yet powerful, filter-based IR spectrometers are ideal for compliance to the new ASTM 7861 test method for accurately measuring biodiesel blend ratios. The Wilks InfraSpec analyzer was the instrument used to develop and validate this method and thus is the industry standard for field measurement of FAME (Fatty Acid Methyl Ester) blend percentages. ...


    By Spectro Scientific

  • Mid-infrared analysis of biodiesel

    The biodiesel industry is growing rapidly. and so is the need for analysis 10 ensure quality product and keep biodiesel in good standing. Biodiesellhat has residual glycerin, glycer· ides, or inorganic salts from the production process can cause problems such as Iilter plugging and injector coking in a diesel engine. The biodiesel blend ralio also can affect cold weather performance, lax ...


    By Spectro Scientific

  • EDXRF Analysis of Sulfur and Other Elements in Oil

    The concentrations of sulfur substances in fuel oil, which greatly contribute to air pollution and acid rain, are regulated by law in many countries, and these regulations are becoming stricter with the growing concern about their impact on the environment and the consequences for society. Here, using the easy-to-operate EDX-720 energy dispersive X-ray fluorescence spectrometer, we determined the ...

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Identification of ester metabolites from petroleum hydrocarbon biodegradation in groundwater using GC × GC‐TOFMS

    In an effort to understand the nature and toxicity of petroleum hydrocarbon degradation metabolites, two‐dimensional gas chromatography linked to a time‐of‐flight mass spectrometer (GC × GC‐TOFMS) was used to conduct non‐targeted analysis of the extracts of 61 groundwater samples collected from 10 fuel release sites. An unexpected result was the tentative identification of 197 unique esters. ...


    By John Wiley & Sons, Ltd.

  • Get Comparable ASTM/EN Data for Biodiesel Blend Measurements While Saving Time and Money using Portable IR Analyzers

    Both EN 14078 and ASTM D7371 methods for measuring the percent biodiesel in diesel fuel use infrared analysis as the analytical method and are based around using an FTIR spectrometer which has the capability to do a multitude of analyses besides the biodiesel in diesel measurement. This is great for a laboratory where various biofuels measurements are required. However, if the only measurement ...


    By Spectro Scientific

  • Comparing TGA, FTIR and fixed filter infrared analyzers for measuring soot levels in in-service lubricants

    Measuring soot in diesel engine oil has become more important as soot levels get higher due to exhaust gas recirculation. As soot isone of the key indicators for the condition of the oil, diesel engine maintenance programs performing regular soot checks can realize cost savings by extending drain periods and reducing used oil disposal. TGA (Thermal Gravimetric Analysis) is the traditional method ...


    By Spectro Scientific

  • Comparison of EN 14078 and ASTM D7371 infrared biodiesel methods

    Infrared (IR) analysis is the most widely used measurement technology for measuring biodiesel in diesel. Both EN 14078 and ASTM D7371 methods use infrared as the analytical method and more specifically FTIR (Fourier Transform Infrared) spectroscopy. Infrared is a common spectroscopic technique used for quantitative and qualitative analysis. In the biodiesel measurement, the fatty acid methyl ...


    By Spectro Scientific

  • Hydrogen production through chemical looping using NiO/NiAl2O4 as oxygen carrier

    A new autothermal route to produce hydrogen from natural gas via chemical looping technology was investigated. Nowadays, 90% of the worldwide produced hydrogen comes from fossil fuels, the most common process being Steam Methane Reforming (SMR), which produces several kg of CO2 equivalent per kg of hydrogen. In classic SMR technology, most of the greenhouse gases are vented to the atmosphere. ...


    By Hiden Analytical

  • New technologies for measuring the humidity of biomass

    Methods applicable to a great variety of solid biofuels In recent years, systems have sprung up which use near infrared X-ray (NIR) spectroscopy, radio frequency (RF) and microwave spectroscopy as alternatives to the traditional method of measuring humidity by weight difference in the fuel burner. What these methods have in common is that they can be used for a great variety of solid biofuels, ...

  • TVOC measurement for LEED/green building evaluation

    Total Volatile Organic Compounds (TVOC) may be evaluated when building designers/managers are pursuing the Leadership in Energy and Environmental Design Green Building Rating System for New Construction (LEED-NC) EQ Credit 3.2. The latest LEED-NC guidance document specifies that the maximum allowed concentration of TVOC measured in a building (post construction, pre-occupancy) is 500 µg/m3; the ...


  • Monitoring greenhouse gases from biofuel crops

    Global issues such as climate change and energy security have driven rapid growth in renewable energy production - wind, solar, tidal, geothermal, hydro, biofuels etc. However, logically, each of these methods should deliver a net benefit in terms of greenhouse gas (GHG) reduction, so researchers in the United States have employed portable FTIR analysers to study the GHG emissions of biomass ...


    By Gasmet Technologies Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you