fuel analyzer Articles

  • How to analyze H2S, All Mercaptans, THT and Total Sulfur for Monitoring Natural Gas or Gaseous Fuels in Metering Stations

    Chromatotec has been pleased to participate to the last issue of Petro Industry News with an article on “How to analyze H2S, All Mercaptans, THT and Total Sulfur for Monitoring Natural Gas or Gaseous ...


    By Chromatotec Group

  • Wind Energy Production Estimates: Moving Beyond Time Averages

    No need to be a statistician to see that averages are often useful to compare different things. And yet, they often fall short as a true measure of performance. For instance, we use averages to compare the current weather against the climate normals or to get a sense of how our favorite sport team or player is doing. Team (player) statistics are a concise way of combining the scores from many ...


    By AWS Truepower, LLC

  • Waste Fuel Case History

    The Customer The company engages in the design, manufacture, and sale of machinery for decomposing petroleum-based materials. The company uses microwave technology for recovering hydrocarbons and fossil fuels from sources, such as tires, oil shale, capped wells, coal, automotive shredded residue, municipal solid waste, shale deposits, and waste oil streams. The ...

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • Sample Preparation for Refuse Derived Fuels

    Plastic, wood and shredded waste, are in times of rising crude oil prices very interesting additions to the classic fuels. Especially in the cement industry, the energy rich fractions from conditioning processes are readily burned along. Important here is the analytical evaluation of the materials. Refuse derived fuels: Plastic, wood and shredded waste: Here are some examples of more or less well ...


    By Fritsch Milling and Sizing

  • Fuel Cell Voltage Monitoring Considerations

    Knowing what’s happening inside a fuel cell is a critical function, especially as fuel cells are continuing to be developed. One important aspect of this is to measure the voltageof each cell in a stack. Although this may sound trivial, it can be more complex and more expensive than it may at first appear due to high voltages, high channel counts,communication types, etc. There ...


    By Fuel Cells Etc

  • Analyzing for Trace CO and CO2 using a Total Hydrocarbon Analyzer

    Untitled Document The purity of Specialty Gases is determined by the measurement of various contaminants including Total Hydrocarbons. Low level measurements of carbon ...


    By MOCON, Inc. - Baseline

  • Sulfur Compounds Analyzer MEXA-1170SX

    The MEXA-1170SX is a continuous gas analyzer for sulfur compounds existing in engine emissions. It can measure SO2 concentration and the amount of total reduced sulfur compounds (TRS), such as H2S, separately. It can also measure the total sulfur compounds (TS) that contains both gaseous compounds and liquid compounds in PM, such as SO3. By utilizing ultra-violet fluorescence (UVF) method and ...


    By HORIBA Europe GmbH

  • Case study - EPH in soil with No. 6 fuel oil

    No. 6 fuel oils (heavy fuel oil, bunker C oil) is often used in industry for heat, steam or power generation. A consultant used Sitelab to investigate two different spill sites contaminated with subsurface plumes of NAPL resulting from leaking underground storage tanks (USTs). Soils were collected from borings using a drill rig and field screened for their EPH aromatic content. Split samples ...


    By Sitelab Corporation

  • Biodiesel Analysis with Mid Infrared - From Feedstock to Fuel

    Introduction The biofuels industry is growing rapidly and so is the need for analysis to ensure quality product. The parameters for quality biodiesel require different types of instruments and measurement systems, such as gas chromatographs (GC), titrators, centrifuges, infrared spectrometers... Although claims are out there for the analyzer that will do it all, unfortunately there is no one ...


    By Spectro Scientific

  • Fuel Oil Spill during maintenance in Ohio

    During replacement of oil furnace by an HVAC contractor in Ohio, there was an accidental release of almost 250 gallons of No. 2 heating oil in the basement. The oil seeped below the concrete surface and the smell of heating oil fumes was so strong that the home owner was advised to relocate in a hotel to prevent chemical burn of throat tissues. Environment company in charge of the cleanup removed ...


    By Sarva Bio Remed, LLC

  • Simplified biofuels measurements with portable mid infrared analyzers

    Product quality begins at the production facility and extends to consumer filling station. Some process control or quality verification analyses can be done with quick and simple verification tests while others require more complete tests according to the ASTM or EN approved methods. Many crucial measurements can be performed by mid-infrared (IR) analysis. These measurements include free fatty ...


    By Spectro Scientific

  • AMETEK THERMOX Introduces the WDG-V Combustion Analyzer

    Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels.  Information from the Gas Analyzer allows operators to obtain the highest ...

  • By the numbers: Analyzing the U.S. National Climate Assessment

    The draft U.S. National Climate Assessment was released last week, confirming that the climate is changing, that it is primarily due to human activities, and that the United States is already being adversely impacted. These top-line messages ...

  • Monitoring Air/Fuel Mixtures in Glass and Glass Fiber Manufacturing case study

    Measurement of Premix Gas. To produce the desired flame in a glass forehearth or when making fiberglass (glass fiber) insulation, an air/fuel pre-mixer is used. The pre-mixer combines compressed natural gas or propane with air and this mixture is then piped to the process burners At the burner, a fuelrich or fuel-lean flame is produced depending on the air/ fuel ratio selected. In many ...

  • Suitability of anaerobic digestion effluent as process water for corn fuel ethanol fermentation

    A corn fuel ethanol plant integrated with anaerobic digestion treatment of thin stillage increases the net energy balance. Furthermore, the anaerobic digestion effluent (ADE) can be reused as a potential substitute for process water in the ethanol fermentation. In this study, the suitability of ADE as process water for corn ethanol fermentation was investigated by analyzing the potential ...


    By IWA Publishing

  • Xp3 Fuel Efficiency and Maintenance Case Study by Pepsi Guatemala

    PEPSI Guatemala Fuel: Diesel Machine/Type: Truck/Motor Test: Fuel Efficiency and Maintenance OBJECTIVE Evaluation of Xp³ for Diesel’s effectiveness in transport units Nos. 950 y 945. Fuel consumption history, oil analysis, and injectors were checked before Xp³ was added. Oil analyses were conducted after 5,352 km, with and without Xp³. In addition, a detail record of ...


    By Xp3 Canada

  • Taking Fossil Fuels to the Next Level - Standards Underpin Extraction, Processing and Distribution

    To the average person, the oil and gas industry may appear simple — a matter of literally tapping into a natural resource and distributing it to customers. Of course the matter of extraction is rarely simple, and in the case of emergent hydraulic fracturing technology, it is particularly complex and capital-intensive. In fact, the world of petroleum and natural gas extraction, distribution ...


    By ASTM International

  • Application notes: The Sievers InnovOx TOC analyzer: boiler water monitoring

    Background A boiler system is a semi-closed loop system in which water is heated and converted into steam to power a generator. The steam is then allowed to form a condensate and the process is repeated. Boiler water chemistry directly impacts boiler efficiency and fuel use. Improper water treatment allows scale formation and corrosion. Boiler scale and deposits form when impurities ...


    By GE Analytical Instruments

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you