fuel cell manufacturer Articles

  • Are fuel cells the future for stationary power?

    Fuel cells are one solution for generating stationary power for industry and grid balancing, but they are currently not competitive with conventional generation. Marc Height has a look at the market and at new, lower-cost technology coming to the fore that could change the playing field. Input hydrogen and oxygen into a very particular box and, like magic, electricity is produced, alongside heat ...


    By Energy Institute (EI)

  • Development of a generic fuel cell model: application to a fuel cell vehicle simulation

    In this paper, a novel approach to fuel cell modelling is proposed. The model is obtained from manufacturer datasheets and is able to represent the behaviour of any hydrogen fuel cells. The simulation results are as expected with an error in the range of ±1%, provided a controlled stack internal humidity. The procedure to extract data from fuel cells datasheet is described along with the method ...


    By Inderscience Publishers

  • Why is Humidity / Moisture Control Important in a Fuel Cell?

    The root of all of this is that Nafion membranes must stay hydrated to function properly. If they are not fully humidified the conductivity decreases and therefore more of the electricity is converted directly to heat before it leaves the membrane (I2R heating). If it gets too dry it basically stops functioning as a proton transporter. ...


    By Fuel Cells Etc

  • South Africa`s fuel cell plan risks failure without support

    An ambitious strategy to create fuel cell products for export will need incentives and cross-government backing to bear fruit, says Radhika Perrot. South Africa's Department of Science & Technology (DST) has been laboriously pushing for the development of hydrogen fuel-cell technology through an ambitious ...


    By SciDev.Net

  • What Else do I Need for my Fuel Cell?

    So, you have bought a Fuel Cell and are ready to start using it. Or are you? Did you plan on any of the ancillary components you might need? Depending on who you buy the ...


    By Fuel Cells Etc

  • Fuel Cells for Hospitals, Apartments and Small Communities (100+ kW)

    A 400 kW PureCell by UTC Power When it comes to larger fuel cell applications such as hospitals, apartment buildings and small communities there are only so many fuel cell companies ...


    By Fuel Cells Etc

  • Recuperative oxidizer - Boat engine manufacturer

    Epcon has extensive experience in designing and building Thermal Oxidizers for Engine Cell Testing. The Problem A major Boat Engine manufacturer needed to lower emissions from engine cell testing. All motors, whether automobile or boat, are Pre-Tested for several hours prior to shipping. The emissions from these Engine Cells are mostly Carbon Monoxide and unburned fuel, with ...


    By Epcon Industrial Systems, LP

  • Aviation fuel cleanliness

    This autumn sees the launch of the second edition of the EI’s handbook, 1550; a title which has become a key industry reference for everyone involved in handling aviation fuel since the first edition was issued in 2007. Martin Hunnybun, EI Technical Team Manager – Fuels & Fuel Handling, describes the new content. With over 20 specified performance parameters, jet fuel is one of ...


    By Energy Institute (EI)

  • Are you eligible for a manufacturing tax credit?

    The United States has been generous with tax credits for energy production. But until now, it’s been somewhat miserly about giving breaks to those who make the equipment that makes the energy – or saves it.That’s changed with creation of the Advanced Energy Manufacturing Credit (MTC), part of the federal stimulus package. The 30% tax credit makes $2.3 billion available for new, expanded, or ...

  • Fuel oil contamination in surrounding soils

    LOCATION:  Batavia, New YorkPROJECT DATE:  September, 1992 to December, 1993CLIENT:  Woodward-Clyde Consultants BACKGROUND: When two 15,000 gallon underground storage tanks were removed from a former manufacturing facility site, #2 and #4 fuel oil contamination was found in the surrounding soils. Approximately 1,600 cubic yards of soil with total petroleum hydrocarbon ...


    By Terra Systems, Inc. (TSI)

  • Case study - Engine test cell exhaust: RTO

    Overview A Mid-western outboard engine manufacturer bought a three year-old plant for the production of its marine engines. When finished, the engines are removed from the assembly line and run for quality control. The 25,000 SCFM of exhaust from testing contains volatile organic compounds (VOCs) that require regulatory compliance. Also within this exhaust is a great deal ...

  • Case study - Engine cell exhaust: RTO

    Problem A Mid-western outboard engine manufacturer bought a three year-old plant for the production of its marine engines. When finished the engines are removed from the assembly line and run for quality control. The 25,000 SCFM of exhaust from testing contains volatile organic compounds (VOCs) that require regulatory compliance. Also, within this exhaust is a great deal of water vapor ...

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Terramend, Heavy Oil & Diesel Fuel, Ontario, Canada

    Project Ex Situ Treatment of Soil Containing Hydraulic Oil and Diesel Fuel Summary Ex situ treatment of approximately 4,000 tons of soil impacted with hydraulic oil and diesel fuel at a former manufacturing facility in Georgetown, Ontario were treated using Adventus' TERRAMENDT technology. TERRAMEND™ effectively reduced contaminant concentrations to below the ...


  • Future 5-Year Projection : Induced Pluripotent Stem Cell Industry Report

    Complete 2013-14 Induced Pluripotent Stem Cell Industry Report Order report by calling ReportsnReports.com at +1 888 391 5441 OR send an email on sales@reportsandreports.com with Induced Pluripotent Stem Cell Market in subject line and your contact details. Stem cell research and ...

  • Water vapour permeation measurement for PV Solar Cell packaging

    With fears of carbon dioxide causing global warming and diminishing supplies of fossil fuels, a looming energy crisis is affecting all countries.  As a consequence, a great deal of world-wide effort is going into the development of alternative energy technologies.  At present, wind, hydro and geothermal are becoming well established with more niche roles for tidal and solar. The latter ...


    By Systech Instruments Ltd

  • 2014 - 2018 Induced Pluripotent Stem Cell Market Projections New Research Report

    ReportsnReports.com adds report Complete 2013-14 Induced Pluripotent Stem Cell Industry Report to its store. Stem cell research and experimentation has been in process for well over five decades, as stem cells have the unique ability to divide and replicate repeatedly. In addition, their “unspecialized” nature allows them to differentiate into a wide variety of specialized cell types. ...

  • Mitigating Global Warming by Integrating Electric and Magnetic Treatment of Fuels within Internal Combustion Engines

    The rapid advance of technology over the past thirty years has brought with it many innovative changes and as a result of this progress, we enjoy an assortment of new consumer products that have enriched our lives and provide enormous benefit to us all. Computers have shrunk in size and advanced in capability and sophistication. Cell phone and satellite networks now cover virtually every corner ...


  • Coming In Out of the Cold: Hybrids Put to the Test

    Untitled Document Point Roberts, WA, Delta B.C.- May 25, 2004 With gas prices reaching an all time high and not much promise of an end in sight, hybrid technology is falling under the lens of some careful ...


    By Investor Ideas Inc

  • What is the Purpose of a Gas Diffusion Layer (GDL)?

    The Gas Diffusion Layer (GDL) plays several critical roles in a typical fuel cell application and is often integrated as part of the Membrane Electrode Assembly (MEA). Typical applications that use GDLs consist of Polymer Electrolyte  ...


    By Fuel Cells Etc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you