fuel cell stack test Articles

  • Fuel Cell Voltage Monitoring Considerations

    Knowing what’s happening inside a fuel cell is a critical function, especially as fuel cells are continuing to be developed. One important aspect of this is to measure the voltageof each cell in a stack. Although this may sound trivial, it can be more complex and more expensive than it may at first appear due to high voltages, high channel counts,communication types, etc. There ...


    By Fuel Cells Etc

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Coming In Out of the Cold: Hybrids Put to the Test

    Untitled Document Point Roberts, WA, Delta B.C.- May 25, 2004 With gas prices reaching an all time high and not much promise of an end in sight, hybrid technology is falling under the lens of some careful ...


    By Investor Ideas Inc

  • Membrane Electrode Assembly (MEA) Activation Procedures

    Why is an activation procedure or break-in necessary for a membrane electrode assembly (MEA)?  A large reason for performing an activation procedure or break-in is to properly humidify the membrane portion of the MEA that was dried out during the hot press stage of the membrane electrode ...


    By Fuel Cells Etc

  • Solar`s Time to Rise and Shine.

    Photovoltaic efficiency records are being shattered, thanks to recent advances in materials science. Last month, a researcher at the National Renewable Energy Laboratory in Golden, Colo., loaded a postage stamp–sized solar cell onto a tray and placed it under a high-intensity pulse solar simulator. The simulator flashed a 2.5 millisecond pulse of light, and 19 mirrors reflected the ...


    By Ensia

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Case study - Biogas desulfurization and siloxanes abatement

    MCFC project by CETAGUA (Mataró – Spain) Reducing the carbon footprint of our society is imperative. This can be achieved by capturing and confining anthropogenic CO2 emissions as well as by replacing fossil-based fuels with renewable or waste-derived fuels. MCFCs (Molten Carbonate Fuel Cells) are unique in being able to do both these things. Thanks to their operating ...


    By Bioconservacion SA

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • In-Vessel Composting of Residential Organics

    In 1994, the Regional Municipality of Peel began work on a system for residential organic residuals collection and composting. Although Peel had been promoting backyard composting, greater diversion rates were sought. The public was surveyed to determine what level of cooperation could be expected for source separation and setting out of food, soiled paper products, yard trimmings, etc. “We knew ...


    By BioCycle Magazine

  • Harnessing The Power Of Microbes

    University researchers are advancing both the understanding and scalability of a biological process where bacteria living under anaerobic conditions consume organic waste and generate electrons and protons that are tapped for electricity production.IMAGINE a self-sustaining battery that never runs out of juice. While the notion may sound far-fetched, Dr. Leonard Tender at the Naval Research ...


    By BioCycle Magazine

  • Look what’s cooking in the world of renewable energy

    The solar and wind innovations that got us where we are today — and those waiting in the wings — point to a hopeful future. Inside a sprawling single-story office building in Bedford, Mass., in a secret room known as the Growth Hall, the future of solar power is cooking at more than 2,500 °F. Behind closed ...


    By Ensia

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Biofilter Applications in the Coatings Industry.

    Soaring energy costs and the high cost of ‘end-of-pipe’ pollution control equipment has caused companies and regulatory agencies to re-evaluate ‘unconventional’ means of achieving VOC and HAP emissions control. The coatings industry is an excellent candidate for alternative, unconventional controls, as VOC and HAP reductions have not been as strident as has been the case in many other industries. ...


  • An EHS Checklist for Low-Risk Technology Facilities

    For environment, health and safety (EHS) managers at technology companies, identifying, assessing and prioritizing potential risks in a lower-risk environment - from offices to call centers - is part of the job. And when it comes to EHS programs, compliance is just the start. The following EHS checklist can serve as an assessment guide for EHS managers of low-risk ...


    By Antea Group - USA

  • Renewable energy marketplace

    ALLU Group markets two types of equipment for use in biomass energy operations. The ALLU Screener Crusher bucket attaches to a front-end loader. The bucket is designed to aerate, crush, screen and mix at one time. The Screener Crusher has a rigid steel frame, onto which horizontally rotating screening and crushing drums are mounted. All the drums rotate in the same direction. There are several ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you