fuel line heater Articles

  • Vortex Pilot Gas Heater Design Needs No External Energy Source

    A new concept of pilot gas heating that requires no external energy (no chemicals and no electricity) has been applied in the Vortex Pilot Gas Heater (VPGH). In VPGH operations, the heat is produced as an outcome of the routine gas pressure reduction in the unit. The technique is based on the "vortex phenomenon" originated in the technique’s proprietary cylindrical device with no moving ...

  • Tuning Your Boiler for Fuel Savings – Out with the Old in with the New Technology

    The USA has about 811,000 MW of installed generation and over 52% of our Electric power is produced by aging coal fired power plants. The average utility boiler furnace was designed about 30-40 years ago. According to DOE records, the average boiler in 1974 was fired with 80% bituminous coal. Now, western PRB coal is much more prevalent and represents about 50% of total coal ...

  • You Don’t Need to Generate Waste Oil to Save Money with a Waste Oil Furnace

    Waste oil furnaces can save on energy expenses for businesses who convert their used petroleum products into fuel for heat. Cutting costs by recycling waste oil makes good bottom line business sense. And waste oil heaters also help companies act on their commitment to preserving the environment by reusing potentially hazardous waste and preventing it from entering the eco-system. For companies ...


    By Clean Energy Heating Systems

  • Enhancing the dynamic performance of electricity production in steam power plants by the integration of transient waste heat sources into the feed-water pre-heating system

    Since the deregulation of the energy market the enhancement of steam power plant's dynamic performance has become more and more important. Nowadays, peak load is a profitable product at the energy stock markets if it can be provided reliably. This is in contrast to many power plants running constantly at full load. A very promising technique to improve the peak load capability of such power ...


    By Inderscience Publishers

  • On rooftops worldwide, a solar water heating revolution

    The harnessing of solar energy is expanding on every front as concerns about climate change and energy security escalate, as government incentives for harnessing solar energy expand, and as these costs decline while those of fossil fuels rise. One solar technology that is really beginning to take off is the use of solar thermal collectors to convert sunlight into heat that can be used to warm ...


    By Earth Policy Institute

  • Case study: Redwood City

    GTR + C3 Overview Neighborhood: Downtown Heating Tubes: 9 Heating Period: 6.5 Months Destruction Rate Efficiency: > 99% Contaminant: PCE, TCE Geology: Silt Silty Clay Volume: 142 yd3 ...

  • DNAPL recovery made easy

    Recovering DNAPL (Dense Non Aqueous Phase Liquid) product is never an easy task. Recovering an extremely viscous DNAPL, such as coal tar, can be a nightmare. With viscosity approaching 20,000 ssu at ambient temperatures, devices that need hydrophobic screens become useless; however, the solution is simple – a PetroXtractor® belt oil skimmer made by Abanaki Corporation, Chagrin Falls, Ohio. ...


    By Abanaki Corporation

  • Frequency Converter energy savings on Boilers

    Boilers and heaters account for a significant share of a plant's purchased fuel cost. Combustion air fans are necessary to provide enough combustion air to the boiler or heater's burner system. Louvers, inlet guide vanes or frequency converters control the amount of air allowed into a boiler. Configuring a combustion air fan to allow the proper amount of air into the burner can improve boiler ...


  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

  • Common Treatment Technologies for Nonhalogenated VOCs

    Soil vapor extraction (SVE), thermal desorption, and incineration are the presumptive remedies for Superfund sites with nonhalogenated VOC-contaminated soil. Because a presumptive remedy is a technology that EPA believes, based upon its past experience, generally will be the most appropriate remedy for a specified type of site, the presumptive remedy approach will accelerate site-specific ...

  • What Are Solar Buildings Technologies?

    Solar buildings technologies use the non-polluting power of the sun to help heat, cool, and power our buildings. Because buildings now use one-third of the energy currently consumed in this country, the potential markets for using solar buildings technologies in place of conventional ones is substantial. Whether you're a home owner, architect, builder, business owner, or industry or utility ...

  • US Carbon Emissions Down 7 Percent in 4 Years: Even Bigger Drops Coming

    Between 2007 and 2011, carbon emissions from coal use in the United States dropped 10 percent. During the same period, emissions from oil use dropped 11 percent. In contrast, carbon emissions from natural gas use increased by 6 percent. The net effect of these trends was that U.S. carbon emissions dropped 7 percent in four years. And this is only the beginning. Graph on U.S. Energy-Related ...


    By Earth Policy Institute

  • CO2 Enrichment in Horticulture... A `Good Life´ for all?

    If you’ve ever watched that classic 1970s TV series, ‘The Good Life’, you might have some idea of the work involved in attaining self-sufficiency. As funny and light-hearted as it was, ‘The Good Life’ offered many insights into the unenviable lot of the vegetable gardener. To its credit, the programme was also ...


    By Analox Sensor Technology

  • Case study - Kiln emission control technologies

    Overview A specialty ceramic material manufacturer in the United States operates several custom-built furnaces in their manufacturing process.  Sometimes referred to as kilns, these high-temperature process devices are generally a major source of air pollutants and require an abatement technology to meet environmental regulations with the state or federal agencies.  As is the ...

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • Photovoltaics: Basic Design Principles and Components

    If you are thinking of generating your own electricity, you should consider a photovoltaic (PV) system—a way to generate electricity by using energy from the sun. These systems have several advantages: they are cost-effective alternatives in areas where extending a utility power line is very expensive; they have no moving parts and require little maintenance; and they produce electricity ...

  • Renewable energy progress report

    What is the Renewable energy progress report and what is its purpose? The Renewable Energy Directive states that a progress report should be issued every two years. The purpose of this progress report is to assess Member States' progress in the promotion and use of renewable energy in line with the 2020 targets. In addition, it contains sections on ...


    By Europa Press Room

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you