fuel measurement Articles

  • Guide for Measuring Fuel Dilution in Lubricating Oil

    Fuel dilution in oil can cause serious engine damage. High levels of fuel (>2%) in a lubricant can result in decreased viscosity, oil degradation, loss of dispersancy, and loss of oxidation stability. Fuel dilution is one of the most important lubricant failure modes in internal combustion engines. It usually occurs due to ...


    By Spectro Scientific

  • Measurements of moisture contents of vegetable oils for fuel use: short communication

    Measurements of the moisture content of a number of plant oils potentially suitable for use as biodiesel have been measured with a Karl Fischer titrator. The oils studied were rapeseed oil, corn oil, spent rapeseed cooking oil, sunflower oil, olive oil and hempseed oil. Trends in moisture content with such factors as degree of prior exposure to the atmosphere are identified and discussed. ...


    By Inderscience Publishers

  • Waste Fuel Case History

    The Customer The company engages in the design, manufacture, and sale of machinery for decomposing petroleum-based materials. The company uses microwave technology for recovering hydrocarbons and fossil fuels from sources, such as tires, oil shale, capped wells, coal, automotive shredded residue, municipal solid waste, shale deposits, and waste oil streams. The ...

  • Aviation fuel cleanliness

    This autumn sees the launch of the second edition of the EI’s handbook, 1550; a title which has become a key industry reference for everyone involved in handling aviation fuel since the first edition was issued in 2007. Martin Hunnybun, EI Technical Team Manager – Fuels & Fuel Handling, describes the new content. With over 20 specified performance parameters, jet fuel is one of ...


    By Energy Institute (EI)

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Fuel Polishing & Transfer Systems

    Earlier this year, Algae-X International came out with a totally new line of Fuel Polishing & Transfer Systems designed and built there in Fort Myers, Florida facilities. By listening to its customers, boat builders and yacht owners alike, Algae-X found out what they wanted to have as an on board fuel optimization package. The design is modular, so the right system can be chosen for each ...


    By AXI International

  • Vibration testing of fuel probes

    Aerial Refuelling The American Bell-Boeing V-22 Osprey is a multimission, military, tilt rotor aircraft with both a vertical and short takeoff and landing capability. It combines the functionality of a conventional helicopter with the high-speed cruise performance of a long-range turboprop aircraft. But even though it is long-range, some missions require in-flight refuelling. The V-22 Osprey can ...

  • Modeling Analysis of Fuel Sprays

    Current engine development processes in which computations play an important role have sought for numerical models which can accurately represent phenomena in spray combustion. The authors have developed original sub-models taking into account the effects of extensive spray combustion phenomena including nozzle cavitation, droplet breakup behavior, multi-component evaporation process, spray-wall ...


    By HORIBA Europe GmbH

  • Corrosion and contact resistance measurements of different bipolar plate material for Polymer Electrolyte Membrane Fuel Cells

    Different types of commercial stainless steels (SS316, SS310 and incoloy 800), poco graphite, composite graphite, titanium carbide, zirconium carbide and carbide base coating on aluminum substrate using thermal spray technique were evaluated as metallic bipolar plate in terms of Interfacial Contact Resistance (ICR) and corrosion resistance in a solution simulating the environment of a bipolar ...


    By Inderscience Publishers

  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • Fuel Cell Voltage Monitoring Considerations

    Knowing what’s happening inside a fuel cell is a critical function, especially as fuel cells are continuing to be developed. One important aspect of this is to measure the voltageof each cell in a stack. Although this may sound trivial, it can be more complex and more expensive than it may at first appear due to high voltages, high channel counts,communication types, etc. There ...


    By Fuel Cells Etc

  • Monitoring fuels in Stormwater - Case study

    The Situation A major pipeline company has large storage tank farms throughout the Western States. The pipeline company transports, stores, blends additives, and distributes gasoline, diesel, and jet fuel to retail service stations and airports. Due to the quantity and movement of fuel at these facilities, there is always the potential for fuel spills. These facilities prevent out of ...

  • Is `Dark Fuel` the same as `Bad Fuel` and can I still use it?

    Algae-X FAQ’sIs 'Dark Fuel' the same as 'Bad Fuel' and can I still use it?This is a question many of us have asked more than once. And what we really want to know is: 'Will the stuff damage my engines?' Engines are expensive, ruining an engine is costly and operating an engine on 'bad fuel' is not wise. We all know that most engine failures start in the fuel tank. When all mechanical parts ...


    By AXI International

  • Case Study: Monitoring Fuel Treatment with On-Site Fuel Analysis

    Version 8 of our industry leading SpectrOil Optical Emission Spectrometers offers significant performance improvements and enhanced productivity. In particular the sensitivity of the instrument has been improved markedly to allow detection of trace metals down to the part per billion (ppb) level. This capability is particularly important to power generators using liquid fuel, as high levels ...


    By Spectro Scientific

  • Black Liquor – Green fuel or greenwash?

    Black liquor is not the product of a pot still in rural Tennessee, but a toxic by-product of the kraft wood pulping process. On May 20, 2009 Canada, together with the European Union, Brazil and Chile, wrote to the United States Congress urging them to repeal a tax credit for the use of black liquor as a biofuel on the basis that the credit is acting as a subsidy on the production of kraft pulp ...


    By McMillan LLP

  • Towards an European Fuel Cell Strategy

     Head of Unit 'Energy Consumption Technology' At the onset of the Fourth Framework Programme for Community research and technological development including demonstration, a ten year fuel cell strategy for Europe was published in 1995 jointly by DG XII (Directorate General for Science, Research and Development) and DG XVII (Directorate General for Energy). The interest of the European ...

  • Measuring Energy and Environmental Success: Metrics!

    February 22, 2011 I recently attended a local environmental conference and a senior manager from a local company gave a stirring talk about the recent investments and upgrades made at her facility to improve sustainability and energy efficiency, including upgrading their boilers and other “roll up your sleeves” strategies. She mentioned that her company noticed significant reductions ...


  • Performance Measurement & Reporting: Measuring what your Company Values

    Measuring environmental performance: Business case for a consumer brand company The main reasons for measuring environmental performance for this company were to pursue opportunities for performance improvement and respond to internal business pressures for reporting performance. The board of directors and senior management team wanted to know how the company was performing globally on ...


    By ERS Global

  • Monitoring of Algae Growth by TOC Measurement

    Global warming due to the excessive use of fossil fuels is becoming a problem which has prompted and accelerated the search for alternative fuels. Among the more attractive alternatives is biomass fuel, which is attracting considerable attention. Microalgae can be used for the production of oil without competing with food production, and to a greater extent than other biofuels, its ...

  • New technologies for measuring the humidity of biomass

    Methods applicable to a great variety of solid biofuels In recent years, systems have sprung up which use near infrared X-ray (NIR) spectroscopy, radio frequency (RF) and microwave spectroscopy as alternatives to the traditional method of measuring humidity by weight difference in the fuel burner. What these methods have in common is that they can be used for a great variety of solid biofuels, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you