fuel measurement equipment Articles

  • Reasons to choose Trenchless Pipe Bursting Repairing Equipment

    Trenchless technology has altered the industry, revolutionizing sewer pipe repair and gaining the favor of many property owners today. No digging, no re-landscaping, no use of chemicals- the trenchless strategy is far better than the traditional approach. In the developing business sector, pipe repair companies need the most effective equipment to stay competitive. The ...


    By TRIC Tools Inc.

  • Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response

    The Western European nation has 20 mobile diesel-driven pumps on standby, ready to assist in national and international emergencies. One of the smallest and most densely populated countries in Western Europe, the Netherlands has nearly 10 million residents who live and work below sea level. Without active water management and primary flood defenses, ...


    By BBA Pumps

  • BBA Mobile Emergency Pumps Provide Rapid Response for Floods

    Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response In its latest edition, the North American PUMPS & SYSTEMS magazine publishes an in-depth article featuring the history and current usage of emergency mobile pumps. The Western European ...


    By BBA Pumps

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Modeling Analysis of Fuel Sprays

    Current engine development processes in which computations play an important role have sought for numerical models which can accurately represent phenomena in spray combustion. The authors have developed original sub-models taking into account the effects of extensive spray combustion phenomena including nozzle cavitation, droplet breakup behavior, multi-component evaporation process, spray-wall ...


    By HORIBA Europe GmbH

  • Aviation fuel cleanliness

    This autumn sees the launch of the second edition of the EI’s handbook, 1550; a title which has become a key industry reference for everyone involved in handling aviation fuel since the first edition was issued in 2007. Martin Hunnybun, EI Technical Team Manager – Fuels & Fuel Handling, describes the new content. With over 20 specified performance parameters, jet fuel is one of ...


    By Energy Institute (EI)

  • Fuel Polishing & Transfer Systems

    Earlier this year, Algae-X International came out with a totally new line of Fuel Polishing & Transfer Systems designed and built there in Fort Myers, Florida facilities. By listening to its customers, boat builders and yacht owners alike, Algae-X found out what they wanted to have as an on board fuel optimization package. The design is modular, so the right system can be chosen for each ...


    By AXI International

  • Vibration testing of fuel probes

    Aerial Refuelling The American Bell-Boeing V-22 Osprey is a multimission, military, tilt rotor aircraft with both a vertical and short takeoff and landing capability. It combines the functionality of a conventional helicopter with the high-speed cruise performance of a long-range turboprop aircraft. But even though it is long-range, some missions require in-flight refuelling. The V-22 Osprey can ...

  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • Warehouse Optimization: Balancing Equipment Performance and Worker Safety Through Emissions Measurements and Air Quality Monitoring

    Successful warehouse functionality is dependent on both maximizing equipment performance and providing a safe and healthy environment for workers that encourages productivity. However, these two factors are often at odds with each other as warehouse equipment such as forklifts, burnishers and delivery trucks emit toxic gases that can have the potential to create poor indoor air quality which ...

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Fuel Cell Voltage Monitoring Considerations

    Knowing what’s happening inside a fuel cell is a critical function, especially as fuel cells are continuing to be developed. One important aspect of this is to measure the voltageof each cell in a stack. Although this may sound trivial, it can be more complex and more expensive than it may at first appear due to high voltages, high channel counts,communication types, etc. There ...


    By Fuel Cells Etc

  • New technologies for measuring the humidity of biomass

    Methods applicable to a great variety of solid biofuels In recent years, systems have sprung up which use near infrared X-ray (NIR) spectroscopy, radio frequency (RF) and microwave spectroscopy as alternatives to the traditional method of measuring humidity by weight difference in the fuel burner. What these methods have in common is that they can be used for a great variety of solid biofuels, ...

  • Distributed Measurements Unlock the Future of Design

    The next generations of materials and design will require sensing technologies that can monitor beyond the scope of point sensors such as thermocouples and strain gauges. New sensing platforms based on optical fibers can obtain spatially continuous, real time data, giving developers detailed insight across broad areas into how their materials and designs behave. Such systems also can sense ...


    By Sensuron

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • TVOC measurement for LEED/green building evaluation

    Total Volatile Organic Compounds (TVOC) may be evaluated when building designers/managers are pursuing the Leadership in Energy and Environmental Design Green Building Rating System for New Construction (LEED-NC) EQ Credit 3.2. The latest LEED-NC guidance document specifies that the maximum allowed concentration of TVOC measured in a building (post construction, pre-occupancy) is 500 µg/m3; the ...


  • Helping veolia transform waste into bio-fuel case study

    LIPODAN, a VEOLIA company, is a plant for recycling grease, food grease and used oil which is collected from restaurants, from gas stations, car garages, bus companies and similar locations. The plant treats 12,000 Tons of organic oils and 6,000 Tons of mineral oil per year. For recycling, the plant is using the LIPOVAL process. The oils are first converted to LIPOFIT, an ...

  • Monitoring level of fuel and diesel oil in cylindrical tanks case study

    SmartScan 50L delivers a reliable measurement solution for monitoring fuel and diesel oil in a municipal Central Post Office. This Post Office provides postal services throughout the country. To provide its services around the clock, the office invests huge efforts in maintaining its building at the highest standards. The problems The Central Post Office uses fuel oil for ...

  • Monitoring Air/Fuel Mixtures in Glass and Glass Fiber Manufacturing case study

    Measurement of Premix Gas. To produce the desired flame in a glass forehearth or when making fiberglass (glass fiber) insulation, an air/fuel pre-mixer is used. The pre-mixer combines compressed natural gas or propane with air and this mixture is then piped to the process burners At the burner, a fuelrich or fuel-lean flame is produced depending on the air/ fuel ratio selected. In many ...

  • TRaC UK – LDS V984 vibration testing of fuel probes for the V22 Osprey

    The Partnership Founded in 1934 as Flight Refuelling Limited (FRL), Cobham plc is a British manufacturing company based in Wimborne Minster, Dorset, England. It is organised into four core technology divisions – Mission Systems, Defence Systems, Avionics and Surveillance, and Aviation Services. The Cobham Mission Systems Division claims to be the world market leader for air-to-air ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you