fuel monitor Articles

  • CH#955 - Fuel Remediation, Difficult Location

    SITE OWNER: A Petroleum Jobber SITE SURVEY: Site and geological surveys had revealed a contaminated area down a gradient from the existing fuel tanks. If was further determined that the contamination was not from the existing tanks through precision testing. The borings described the contamination as resting between the 14 and 20 foot level below the ...


    By Bio-Systems International

  • Bioremediation of Kerosene and Diesel Fuel in soil case study

    The United States has a large hazardous waste problem that is threatening both human health and the environment. Current analysis of the nearly 1,200 National Priority List (NPL) sites reveals that about 80% of the sites are contaminated with organic compounds. Clean-up of hazardous waste sites, as a national priority has accelerated the development of bioremediation technologies. Environmental ...

  • Biodiesel Analysis with Mid Infrared - From Feedstock to Fuel

    Introduction The biofuels industry is growing rapidly and so is the need for analysis to ensure quality product. The parameters for quality biodiesel require different types of instruments and measurement systems, such as gas chromatographs (GC), titrators, centrifuges, infrared spectrometers... Although claims are out there for the analyzer that will do it all, unfortunately there is no one ...


    By Spectro Scientific

  • Magnetic Fuel Treatment Bottom Line Analysis

    BOTTOM LINE ANALYSIS This cost savings analysis was prepared in cooperation with Master Chief Hill of the US Coast Guard Maintenance & Logistics Command using data from the 82’ Cutter Pt. Chico, and 110’ Cutters Anacapa and Long Island over a period of two years when ALGAE-X® performance was monitored and evaluated. Installation of ALGAE-X® units in Diesel Engine applications results in ...


    By AXI International

  • Understanding fuel switching under the EU ETS

    Since the creation of the European Union Emission Trading Scheme (EU ETS), European power producers have monitored carbon emissions resulting from the composition of their production. Fuel switching is the main short–term abatement measure under the EU ETS. It consists in substituting combined cycle gas turbines (CCGTs) for hard–coal plants in off–peak power generation. Thereby coal plants run ...


    By Inderscience Publishers

  • Fuel saving technology continues to cut automotive manufacturing

    Maxsys Ltd, the Walsall-based provider of the Fuel+ System is poised to further boost carbon reduction figures in the automotive industry, offering a guaranteed energy saving (on gas and oil) of at least 5% - a figure that translates into a significant benefit for large energy consumers in the sector. Emissions for vehicle production have reduced significantly since 2001, decreasing from 1.3 ...


    By Maxsys Fuel Systems Ltd

  • Maxsys Fuel Systems Help Hospital Reduce Carbon Footprint with 5.1% Saving on Boiler Fuel Bill

    Fuel energy saving systems supplied and installed by Maxsys are providing improved efficiency to three steam-raising boilers at The Princess of Wales Hospital in Bridgend, a district general hospital within the Bro Morgannwg NHS Trust. The combined effect of the investment is a significant reduction in the organisation’s carbon footprint along with a 5.1% saving on the hospital’s ...


    By Maxsys Fuel Systems Ltd

  • Dow Chemicals achieves 5.2% cut in fuel consumption using Maxsys Fuel System

    A global chemical manufacturer has invested in a Maxsys Fuel System for use on its steam-raising gas fired process boiler. Not only has the new equipment helped reduce CO2 emissions to atmosphere, it has cut annual fuel consumption by 5.2% - a figure equating to an impressive financial saving. With annual sales of $54 billion and 46,000 employees worldwide, The Dow Chemical Company is a true ...


    By Maxsys Fuel Systems Ltd

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Leak tightness testing system for nuclear fuel assemblies in wet conditions of interim spent fuel storage

    The Slovak wet Interim Spent Fuel Storage Facility in the Jaslovske Bohunice nuclear power plant was built and put in operation in 1986. Since 1999, leak tests of VVER-440 fuel assemblies have been provided by the special leak tightness detection system 'Sipping in Pool' delivered by the Framatome-anp facility, with external heating for the precise detection of active specimens. Although this ...


    By Inderscience Publishers

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Monitoring of Algae Growth by TOC Measurement

    Global warming due to the excessive use of fossil fuels is becoming a problem which has prompted and accelerated the search for alternative fuels. Among the more attractive alternatives is biomass fuel, which is attracting considerable attention. Microalgae can be used for the production of oil without competing with food production, and to a greater extent than other biofuels, its ...

  • Monitoring flammable gas in boiler houses

    The most common fuels in use for space and water heating are Oil, Natural Gas and Liquid Petroleum Gas (LPG). By far the most popular, clean and cost effective solutions are utilising Natural Gas or LPG. The traditional safety measure derived from the time of oil fired boiler houses is the use of a fusible link placed above the each boiler. The fusible link is intended to melt if it becomes ...

  • Gasoline, jet and diesel fuel soils contaminated - Petroleum product storage terminal

    LOCATION:  Tiverton, Rhode IslandPROJECT DATE:  April, 1993 to PresentCLIENT:  Confidential BACKGROUND: Soils at this 106 acre former petroleum product storage terminal have been impacted with gasoline, jet fuel, and diesel fuel over the course of 50 years. Estimates of the impacted soils range from 200,000 to 400,000 cubic yards. ACTION TAKEN: Ex-situ bioremediation is being used ...


    By Terra Systems, Inc. (TSI)

  • Union Papertech Ltd. save 6.8% gas using the Maxsys Fuel Systems

    A large Northwest paper mill has installed Maxsys Fuel System technology saving 6.8% off their energy bill and this has inspired them to place new orders with Maxsys for other applications. Union Papertech located at Simpson Clough, Lancashire, is part of the Purico Group, a 4,500-employee organisation with a global presence. Through its policy of continuous investment in the latest technology, ...


    By Maxsys Fuel Systems Ltd

  • Helping veolia transform waste into bio-fuel case study

    LIPODAN, a VEOLIA company, is a plant for recycling grease, food grease and used oil which is collected from restaurants, from gas stations, car garages, bus companies and similar locations. The plant treats 12,000 Tons of organic oils and 6,000 Tons of mineral oil per year. For recycling, the plant is using the LIPOVAL process. The oils are first converted to LIPOFIT, an ...

  • TRaC UK – LDS V984 vibration testing of fuel probes for the V22 Osprey

    The Partnership Founded in 1934 as Flight Refuelling Limited (FRL), Cobham plc is a British manufacturing company based in Wimborne Minster, Dorset, England. It is organised into four core technology divisions – Mission Systems, Defence Systems, Avionics and Surveillance, and Aviation Services. The Cobham Mission Systems Division claims to be the world market leader for air-to-air ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you