fuel removal Articles

  • FUEL-WASH Mercaptan Removal

    Summary Finding the right treating solution to remove impurities from hydrocarbon streams is a challenging task for any refiner and one of the chief research scientists from the Merichem Company found the FreshAWL chemistry as an interesting and plausible solution to assist in their processing systems for the removal of Mercaptans from RSH (Mercaptan Laden) Kerosene. FreshAWL ...


    By FreshAWL, LLC

  • Fuel oil removal

    Project Profile:Aquifer Solutions Groundwater Remediation DATA: End User: Aquifer Solutions, for Republic Paper Location: Board Commissioned: Commerce City, CO, Fall, 2003 Units: (1) FDB-19P Complete with dedicated Flow Rate: backwash ...


    By Filtra Systems

  • Tire Shredders: An Introduction

    How Does a Tire Shredding Machine Work? Tire shredding is a very common way of preparing scrap tires for disposal or recycle. In order to dispose of tires in a landfill, they must be shredded to various sized chips. The size required depends on the state or area you live in. Tire shredding is also used for recycling tires; crumb tire or tire mulch can be reused to create surfaces on ...


    By ECO Green Equipment

  • Performance of microbial fuel cells on removal of metronidazole

    The microbial fuel cells (MFCs) are the focus of extensive investigation as one of the promising technologies for renewable energy generation and wastewater treatment. Two-chambered MFCs were designed to investigate the removal of metronidazole and to quantify the effect of antibiotic on the efficacy of energy generation. Using 1,000 mg glucose L−1 containing different concentrations of ...


    By IWA Publishing

  • From the biogas to vehicle fuel

    The biogas consists mainly of methane and carbon dioxide. Other components can be water and sulphur, mainlyhydrogen sulphide. To be able to use the biogas as vehicle fuel or to distribute it in natural gas grids the gas has to becleaned and upgraded. The biogas is upgraded by removing carbon dioxide to raise the calorific value and create a gaswith constant quality. One of the techniques to ...


    By Energy & Waste S.l

  • Aviation fuel cleanliness

    This autumn sees the launch of the second edition of the EI’s handbook, 1550; a title which has become a key industry reference for everyone involved in handling aviation fuel since the first edition was issued in 2007. Martin Hunnybun, EI Technical Team Manager – Fuels & Fuel Handling, describes the new content. With over 20 specified performance parameters, jet fuel is one of ...


    By Energy Institute (EI)

  • Fuel Polishing & Transfer Systems

    Earlier this year, Algae-X International came out with a totally new line of Fuel Polishing & Transfer Systems designed and built there in Fort Myers, Florida facilities. By listening to its customers, boat builders and yacht owners alike, Algae-X found out what they wanted to have as an on board fuel optimization package. The design is modular, so the right system can be chosen for each ...


    By AXI International

  • Removal of Lead from Gasoline

    On 12th March 1997, the European Commission adopted a proposal from the Environment Commissioner Ritt Bjerregaard on a European Union strategy to combat acidification. The strategy will, by 2010, reduce significantly the extent of the areas in the European Union where the tolerance of sensitive ecosystems to acidity is exceeded. Main elements of the strategy include establishment of national ...


    By The World Bank

  • Simultaneous pollutant removal and electricity generation in denitrifying microbial fuel cell with boric acid-borate buffer solution

    A double-chamber denitrifying microbial fuel cell (MFC), using boric acid-borate buffer solution as an alternative to phosphate buffer solution, was set up to investigate the influence of buffer solution concentration, temperature and external resistance on electricity generation and pollutant removal efficiency. The result revealed that the denitrifying MFC with boric acid-borate buffer ...


    By IWA Publishing

  • Effect of cathode electron acceptors on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell

    The current investigation reports the effect of cathode electron acceptors on simultaneous sulfide and nitrate removal in two-chamber microbial fuel cells (MFCs). Potassium permanganate and potassium ferricyanide were common cathode electron acceptors and evaluated for substrate removal and electricity generation. The abiotic MFCs produced electricity through spontaneous electrochemical ...


    By IWA Publishing

  • Superfund site - creosote removal

    Project Profile:US EPA Groundwater Remediation of Creosote Oil DATA: End User: US EPA, Army Corps of Engineers, Superfund site program Location: Bainbridge Island, WA Commissioned: Spring, 2005 Units: (1) FDB-7P Hydromation Deep Bed, Filter (HDBF) Flow Rate: 70 ...


    By Filtra Systems

  • Simultaneous carbon and nitrogen removal using a litre-scale upflow microbial fuel cell

    A 10 L upflow microbial fuel cell (UMFC) was constructed for simultaneous carbon and nitrogen removal. During the 6-month operation, the UMFC constantly removed carbon and nitrogen, and then generated electricity with synthetic wastewater as substrate. At 5.0 mg L−1 dissolved oxygen, 100 Ω external resistance, and pH 6.5, the maximum power density (Pmax) ...


    By IWA Publishing

  • Enhanced Removal of Separate Phase Viscous Fuel by Electrical Resistance Heating and multi phase Extraction

    Abstract A floating hydrocarbon plume at a manufacturing facility in Georgia was remediated using electrical resistance heating (ERH) and multi-phase extraction. The hydrocarbon was a specialty fuel similar to kerosene or diesel fuel. Initially, hydrocarbon covered an area of 4900 ft2 (500 m2) and was up to l0 ft (3 m) thick, with most wells containing 1-3 ft (0.5-1 m) of hydrocarbon. ...


    By TRS Group, Inc.

  • Making biodiesel blends fuel is simple

    Biodiesel is made in the process of transesterification of vegetable oil by methanol, although sometimes ethanol or isopropyl alcohol are used instead. The ration is approximately 200 kg of methanol per 1 ton of oil (plus potassium or sodium hydroxide). Process temperature is approximately 60°С, no pressure increase is required. After the transesterification reaction, the content of ...


    By GlobeCore GmbH

  • Fuel oil contamination in surrounding soils

    LOCATION:  Batavia, New YorkPROJECT DATE:  September, 1992 to December, 1993CLIENT:  Woodward-Clyde Consultants BACKGROUND: When two 15,000 gallon underground storage tanks were removed from a former manufacturing facility site, #2 and #4 fuel oil contamination was found in the surrounding soils. Approximately 1,600 cubic yards of soil with total petroleum hydrocarbon ...


    By Terra Systems, Inc. (TSI)

  • Water contamination in fuel: cause and effect

    Water exists in three physical states and depending on the surrounding conditions it finds its way to the fuel systems like the high pressure common rail (HPCR) fuel systems on diesel engines. The important point thereafter is to provide the best possible on-engine protection by securing the fuel injector systems from severe damage. As the environmental challenges and emission regulations become ...

  • Domestic fuel price and the Nigerian macroeconomy

    This study examined empirically a one–to–one nexus between domestic fuel price and various macroeconomic variables in Nigeria for the period spanning 1986 to 2011. The study adopted both a vector auto–regressive (VAR) and a vector error correction (VEC) models for appropriate analysis. For pairs of variables that are integrated of the same order but not co–integrated, the VAR model revealed that ...


    By Inderscience Publishers

  • Fuel for Schools: A Biomass Success Story

    On our blog, you have learned about different types of biofuel, the process for creating biofuel, and the global benefits of using biomass technology. Now it’s time to see all of this information put into practice. Different areas of the country have supported a program called Fuel for Schools, which encourages the use of renewable, local resources to provide heat to schools. ...


    By Uzelac Industries, Inc

  • Fuel Cell Voltage Monitoring Considerations

    Knowing what’s happening inside a fuel cell is a critical function, especially as fuel cells are continuing to be developed. One important aspect of this is to measure the voltageof each cell in a stack. Although this may sound trivial, it can be more complex and more expensive than it may at first appear due to high voltages, high channel counts,communication types, etc. There ...


    By Fuel Cells Etc

  • WSM delivers hog fuel system

    West Salem Machinery has completed delivery of a complete hog fuel screening and hogging system to a major paper manufacturer. The system was fully engineered and manufactured by WSM, including conveyors, magnetics, WSM 48-9 disc screen, WSM 4048BP wood/bark hog with pivot case, and support structures with access platforms. The heavy-duty disc screen provides pre-screening of bark and wood waste, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you