fuel saving Articles

  • Forces attracted to fuel savings

    Magnatech Fuel Conditioning Limited have recently completed a contract to install their very powerful magnetic fuel conditioning units to all structural gas and oil burning equipment across five MOD bases in England. This was after research concluded that Magnatech was the most cost effective provider of this type of application.The MOD have used this technology previously, when a number of bases ...

  • Fuel saving technology continues to cut automotive manufacturing

    Maxsys Ltd, the Walsall-based provider of the Fuel+ System is poised to further boost carbon reduction figures in the automotive industry, offering a guaranteed energy saving (on gas and oil) of at least 5% - a figure that translates into a significant benefit for large energy consumers in the sector. Emissions for vehicle production have reduced significantly since 2001, decreasing from 1.3 ...


    By Maxsys Fuel Systems Ltd

  • Hybrid System in Fiji: The Sun Saves Fuel

    When you think of Fiji, you first think of vacation, wonderful beaches with palms and crystal clear water with perfect spots for scuba diving. We also thought of energy: Energy that could help build a more ecological electrical power supply. The existing power supply on the three separate islands of Kadavu, Lakeda and Rotuma around the Fijian mainland had been fully based on diesel generators. ...


    By SMA Solar

  • Waterless coolant extends engine life, saves fuel

    Forget about overheating your cooling systems if you use Evans waterless coolant. With a boiling point of 375 degrees and a freezing point of -40 degrees, your engine operates more efficiently and reduces the cooling load on radiator and fan, says Mark Stone of Evans Cooling Systems, Inc. “Water based coolants run at or near their boiling point, while Evans waterless coolants, due to their ...


    By Evans Cooling Systems, Inc.

  • “Linking” semi trucks can result in huge fuel savings

    Over the past year one of the hottest tech trends has been the race to develop autonomous — or driverless — cars. The journal Nature even featured these vehicles on the cover in early February and quoted experts saying they could hit the road in less than a decade. But this rapid ...


    By Ensia

  • How Waste Fleets Can Maximize Fuel Savings While Adopting CNG

    Natural gas and, specifically, compressed natural gas (CNG) fueling stations and vehicles running on CNG were all over the industry news in 2012. Organizations such as Republic and Veolia added CNG collection vehicles to their fleet makeup in Pennsylvania, Texas and Wisconsin, while Waste Management opened more than a dozen CNG fueling stations to support its growing fleet of CNG vehicles. ...


    By Waste Advantage Magazine

  • Peak oil and energy security: can alternative fuels and vehicles save us?

    Peak oil can be defined as the point in time when global oil production reaches its maximum annual rate, after which the annual production rate generally declines. Against an expected profile of growing demand for oil-based transport fuels, when peak oil occurs, it could create a growing transport fuel supply gap which, if not filled, would be expected to lead to very high prices for petroleum ...


    By Inderscience Publishers

  • How semi trucks can save billions of gallons of fuel

    Each year, over two million long-haul trucks crisscrossing America consume nearly 36 billion gallons of diesel fuel. Researchers at Lawrence Livermore National Laboratory have discovered that adding drag-reducing devices to trucks could result in billions of gallons of fuel savings. The devises tested included trailer skirts — panels along ...


    By Ensia

  • Tuning Your Boiler for Fuel Savings – Out with the Old in with the New Technology

    The USA has about 811,000 MW of installed generation and over 52% of our Electric power is produced by aging coal fired power plants. The average utility boiler furnace was designed about 30-40 years ago. According to DOE records, the average boiler in 1974 was fired with 80% bituminous coal. Now, western PRB coal is much more prevalent and represents about 50% of total coal ...

  • Union Papertech Ltd. save 6.8% gas using the Maxsys Fuel Systems

    A large Northwest paper mill has installed Maxsys Fuel System technology saving 6.8% off their energy bill and this has inspired them to place new orders with Maxsys for other applications. Union Papertech located at Simpson Clough, Lancashire, is part of the Purico Group, a 4,500-employee organisation with a global presence. Through its policy of continuous investment in the latest technology, ...


    By Maxsys Fuel Systems Ltd

  • Improving Fuel Efficiency - Fred Weber, Inc. Realizes Significant Fuel Savings Using Combustion Catalyst Systems

    To see and hear the two Caterpillar 988Fs loading the crusher at Fred Weber's North Stone Quarry in Maryland Heights, Mo., one might think they are just like any other large wheel loaders working on any other quarry or construction job site in the Midwest. They look, sound and run like any well-maintained 988Fs would as they move quickly between the piles and the plant, but these are different; ...

  • Maxsys Fuel Systems Help Hospital Reduce Carbon Footprint with 5.1% Saving on Boiler Fuel Bill

    Fuel energy saving systems supplied and installed by Maxsys are providing improved efficiency to three steam-raising boilers at The Princess of Wales Hospital in Bridgend, a district general hospital within the Bro Morgannwg NHS Trust. The combined effect of the investment is a significant reduction in the organisation’s carbon footprint along with a 5.1% saving on the hospital’s ...


    By Maxsys Fuel Systems Ltd

  • Fleet management: saving time, saving dollars

    Running an effective fleet operation is all about efficiencies—especially time efficiencies. According to industry research, the global market for fleet management solutions will experience significant growth over the next few years. The current economic climate, shrinking profit margins and sustainability goals have all driven the demand for technology solutions to improve efficiencies and ...


    By Waste Advantage Magazine

  • Fuel Homogenization

    The structure of the financial expenses of automotive businesses and boiler plants is quite varied, though it still allows to identify the main expenditures. First of all, it is the fuel, which accounts for no less than 40% of all costs. Fuel homogenization devices are designed to increase the quality of combustion, thereby saving resources. Homogenized fuel features good performance, ...


    By GlobeCore GmbH

  • Fans and fuel

    One of the fun things about researching articles is how you can end up in a totally different place than where you started. A few weeks ago, I was working on a story for the October issue of HDT on oil and coolant analysis. That led to what I'm going to talk about today, which is fans and fuel economy. It started out when I was talking to Mike Tourville with Evans, which makes a waterless ...


    By Evans Cooling Systems, Inc.

  • Automatic calibration saves big

    Automatic gas sensor calibration technology was developed by Rel-Tek and proven over a decade of industrial applications involving large alternative fuel, transit bus garages.  CNG, LNG, LPG and hydrogen fuels present the possibility of explosive gas buildup indoors, so sustaining the accuracy of the installed gas monitoring system is a never-ending responsibility for the owner.  ...


    By Rel-Tek Corporation

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Using electricity to save the planet

    When it comes to energy efficiency, it used to be the big guys that mattered. Policymakers and market leaders focused on manufacturers, refiners and others that gobbled up lots of kilowatt hours.It’s not surprising. Manufacturers create bang for the buck. Better motors, refrigeration or combined heat and power can lead to six-digit dollar savings — far more impressive than the $10 per month an ...

  • Savings and Incentives for Lighting Upgrades

    One of the biggest obstacles to performing upgrades of existing lighting systems is the oftentimes high initial cost. Although new energy standards that affect the availability of older lighting types still in use will force the decision for many, those who act before a particular lamp type becomes unavailable stand to gain the most benefit. ...


    By Larson Electronics LLC

  • Energy Savings Case History

    The Customer The Company is a worldwide supplier of thousands of innovative and reliable products to dozens of diverse markets—from automotive to healthcare to renewable energy to electronics. Products include tapes, adhesives, abrasives, films, reflective materials, filtration systems and an array of other products that keep homes clean, offices organized and buildings ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you