fuel tank monitoring Articles

  • Monitoring level of fuel and diesel oil in cylindrical tanks case study

    SmartScan 50L delivers a reliable measurement solution for monitoring fuel and diesel oil in a municipal Central Post Office. This Post Office provides postal services throughout the country. To provide its services around the clock, the office invests huge efforts in maintaining its building at the highest standards. The problems The Central Post Office uses fuel oil for ...

  • Fuel Polishing & Transfer Systems

    Earlier this year, Algae-X International came out with a totally new line of Fuel Polishing & Transfer Systems designed and built there in Fort Myers, Florida facilities. By listening to its customers, boat builders and yacht owners alike, Algae-X found out what they wanted to have as an on board fuel optimization package. The design is modular, so the right system can be chosen for each ...


    By AXI International

  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

  • Two models for tank cleaning

    Fluid treatment specialist Algae- X International, Fort Myers, Fla., has expanded its Mobile Tank Cleaning (MTC) series with two new models. The MTC 500-AFR is an adjustable flow rate system for use with a wide range of tank sizes and fluid types such as diesel, biodiesel and hydraulic fluid. The MTC 1000-LX is the next generation of Algae-X’s MTC 1000 unit, now with stainlesssteel plumbing and ...


    By AXI International

  • Is `Dark Fuel` the same as `Bad Fuel` and can I still use it?

    Algae-X FAQ’sIs 'Dark Fuel' the same as 'Bad Fuel' and can I still use it?This is a question many of us have asked more than once. And what we really want to know is: 'Will the stuff damage my engines?' Engines are expensive, ruining an engine is costly and operating an engine on 'bad fuel' is not wise. We all know that most engine failures start in the fuel tank. When all mechanical parts ...


    By AXI International

  • Site Characterisation in Support of Monitored Natural Attenuation of Fuel Hydrocarbons and MTBE in a Chalk Aquifer in Southern England

    This Case Study Bulletin describes a research project, which was carried out to determine whether monitored natural attenuation was a viable option for managing fuel hydrocarbon contamination in a chalk aquifer in southern England. The research, which was carried out from February 2000 to March 2001, was undertaken by the University of Sheffield on behalf of TotalFinaElf at a petrol filling ...


    By Solinst Canada Ltd.

  • Don’t steal our fuel! case study

    SOLID introduces a sophisticated fuel tank monitoring solution for remote electrical generators at distant and isolated sites such as cellular hubs. Monitoring and control operations are enabled as a combination of level measurement, web technology and cellular communications. Veolia and F.K. Generators Ltd, specializing in diesel generators, have chosen our solution for control and monitoring of ...

  • Magnetic Fuel Treatment Bottom Line Analysis

    BOTTOM LINE ANALYSIS This cost savings analysis was prepared in cooperation with Master Chief Hill of the US Coast Guard Maintenance & Logistics Command using data from the 82’ Cutter Pt. Chico, and 110’ Cutters Anacapa and Long Island over a period of two years when ALGAE-X® performance was monitored and evaluated. Installation of ALGAE-X® units in Diesel Engine applications results in ...


    By AXI International

  • CH#955 - Fuel Remediation, Difficult Location

    SITE OWNER: A Petroleum Jobber SITE SURVEY: Site and geological surveys had revealed a contaminated area down a gradient from the existing fuel tanks. If was further determined that the contamination was not from the existing tanks through precision testing. The borings described the contamination as resting between the 14 and 20 foot level below the ...


    By BIO-SYSTEMS International

  • Helping veolia transform waste into bio-fuel case study

    LIPODAN, a VEOLIA company, is a plant for recycling grease, food grease and used oil which is collected from restaurants, from gas stations, car garages, bus companies and similar locations. The plant treats 12,000 Tons of organic oils and 6,000 Tons of mineral oil per year. For recycling, the plant is using the LIPOVAL process. The oils are first converted to LIPOFIT, an ...

  • Bioremediation of fuel oil spill at a coastal naval air station in the united kingdom

    Introduction Approximately 1000 gallons of fuel oil had seeped from broken storage tank lines into the soil matrix beneath a boiler house. Oil was subsequently forced from beneath the boiler building by periodic heavy rainfall. The fuel oil migrated down a slope into a farmer"s field causing extensive damage to the vegetation and grazing area inhabited by sheep. ...


    By Microbac Ltd

  • Case study - NAPL forensics analysis at tank farm in Boston

    Ambient Engineering, Inc. (Concord, MA) used Sitelab to investigate and remediate a former tank farm along Boston Harbor contaminated by a large, subsurface plume of commingled diesel fuel and No. 6 fuel oil. Loading racks (above) are suspected to have contributed to most of the site’s contamination. Light Non Aqueous Phase Liquids (LNAPL) collected from 40 monitoring wells were tested ...


    By Sitelab Corporation

  • Common Treatment Technologies for Fuels in Ground Water, Surface Water, and Leachate

    It may be necessary to know other subsurface information to remediate fuels in ground water. Treatability testing to characterize contaminant biodegradability and nutrient content may be needed for any biodegradation technology. A subsurface geologic characterization would be particularly important to characterize the migration of NAPLs. Recovery tests are usually necessary to design a ...

  • Tank terminal demonstrates the electrically operated solution for ESD Valves - case study

    Overview Since the disastrous fire at the Buncefield fuel depot in 2005, much has been done to ensure that such a catastrophic accident should not happen again. Led by COMAH (Competent Authority/Industry Standards Task Group), safeguards have been put in place by the petroleum industry to provide additional safety and environmental protection to tank storage installations. Endorsing the ...


    By Rotork

  • GE Leakwise Application Notes: Leak/Spill Detection for Above Ground Oil Storage Tanks

    Leakwise Oil-in-Water Detection and Monitoring Systems are being used in a variety of applications to address health and safety directives, environmental regulations, and economic necessity. Oil and fuel storage facilities worldwide have over 15 years of experience depending on these reliable systems. Read more about the ways Leakwise can be used to monitor and detect ...


    By GE Analytical Instruments

  • Oil Monitoring in Trans-Border River Uh Between Ukraine and Slovakia

    The Problem: Long-term contamination of Uh river by waste motor oil, aircraft fuel, etc., being by-products of Russian army bases on Ukrainian part of the border.  Slocakia needed to protect its rivers from this pollution by early oil warning systems on Uh river, since it flows into other rivers, flowing into Black Sea. The Solution: Sample water is taken from river surface by float sampler ...

  • Hardware Solutions to Monitor Gas and Thermal Energy

    Why Monitor Gas and Thermal Energy? Hang on, are you telling me you are an energy manager that’s only worried about electricity!? Let’s take a step back and realise that gas represents nearly 40% of the total energy consumed in the industrial and service sectors in Europe. That’s almost half, you guys! ...


    By DEXMA

  • New Report on MTBE and the Requirements for Uderground Storage Tank Construction and Operation in EU Member States

    Increasing environmental concern over the last decade regarding pollution of water has led to significant revisions in environmental regulations. One pollutant in particular – methyl-tertiary-butyl-ether (MTBE) – has been responsible for significant litigation in the USA after several reported incidents of groundwater contamination caused by leaking gasoline Underground Storage Tanks. Subsequent ...


    By Arthur D. Little

  • Rikers Island UST design & environmental services

    Design and Permitting of the upgrade fourteen (14) underground diesel & No. 6 fuel oil storage tanks with a combined tankage of over 540,000 gallons for a Major Oil Storage Facility. Project includes subsurface investigation, installation of soil borings, groundwater monitoring wells, non-destructive ultrasonic and volumetric tightness testing of tanks, tank design rehabilitation including ...


    By GEA ENGINEERING

  • Emergency response and remediation of a petrol leak: petrol filling station

    Project: Emergency Fuel Leak at an Operational Petrol Station Client: Franchised petrol station operator Services: Emergency response/leak management, regulator negotiation, site investigation, remediation and verification Summary: Responsive, pragmatic advice and robust regulator negotiations aided rapid characterisation ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you