fuel testing Articles

  • Vibration testing of fuel probes

    Aerial Refuelling The American Bell-Boeing V-22 Osprey is a multimission, military, tilt rotor aircraft with both a vertical and short takeoff and landing capability. It combines the functionality of a conventional helicopter with the high-speed cruise performance of a long-range turboprop aircraft. But even though it is long-range, some missions require in-flight refuelling. The V-22 Osprey can ...

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response

    The Western European nation has 20 mobile diesel-driven pumps on standby, ready to assist in national and international emergencies. One of the smallest and most densely populated countries in Western Europe, the Netherlands has nearly 10 million residents who live and work below sea level. Without active water management and primary flood defenses, ...


    By BBA Pumps

  • BBA Mobile Emergency Pumps Provide Rapid Response for Floods

    Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response In its latest edition, the North American PUMPS & SYSTEMS magazine publishes an in-depth article featuring the history and current usage of emergency mobile pumps. The Western European ...


    By BBA Pumps

  • Fuel cell heating appliances field tests

    The beginning of field tests with a new generation of fuel cell heating appliances (FCHAs) under the responsibility of Vaillant brings fuel cell technology for decentralized household energy supply into a new phase. The objective of testing the systems, which were developed in close cooperation with the US company Plug Power, is to examine how complexity and thus the systems' costs can be ...

  • Fans and fuel

    One of the fun things about researching articles is how you can end up in a totally different place than where you started. A few weeks ago, I was working on a story for the October issue of HDT on oil and coolant analysis. That led to what I'm going to talk about today, which is fans and fuel economy. It started out when I was talking to Mike Tourville with Evans, which makes a waterless ...


    By Evans Cooling Systems, Inc.

  • TRaC UK – LDS V984 vibration testing of fuel probes for the V22 Osprey

    The Partnership Founded in 1934 as Flight Refuelling Limited (FRL), Cobham plc is a British manufacturing company based in Wimborne Minster, Dorset, England. It is organised into four core technology divisions – Mission Systems, Defence Systems, Avionics and Surveillance, and Aviation Services. The Cobham Mission Systems Division claims to be the world market leader for air-to-air ...

  • Leak tightness testing system for nuclear fuel assemblies in wet conditions of interim spent fuel storage

    The Slovak wet Interim Spent Fuel Storage Facility in the Jaslovske Bohunice nuclear power plant was built and put in operation in 1986. Since 1999, leak tests of VVER-440 fuel assemblies have been provided by the special leak tightness detection system 'Sipping in Pool' delivered by the Framatome-anp facility, with external heating for the precise detection of active specimens. Although this ...


    By Inderscience Publishers

  • Fuel Economy Guide

    How to Use this Guide How we get the fuel economy estimates The fuel economy estimates are the average of test results conducted for the U.S. Environmental Protection Agency (EPA). The vehicles are driven by professional drivers in controlled laboratory conditions. The results are adjusted to account for differences between the controlled laboratory conditions ...


  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Aviation fuel cleanliness

    This autumn sees the launch of the second edition of the EI’s handbook, 1550; a title which has become a key industry reference for everyone involved in handling aviation fuel since the first edition was issued in 2007. Martin Hunnybun, EI Technical Team Manager – Fuels & Fuel Handling, describes the new content. With over 20 specified performance parameters, jet fuel is one of ...


    By Energy Institute (EI)

  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

  • Engine Testing

    Engine testing involves measurement of rotating speed and torque of the engine by applying load controlled by a dynamometer connected to its output shaft. HORIBA has developed various types of dynamometer for the purpose of engine testing. They are mainly classified into two types; one is absorbing only dynamometer such as hydraulic dynamometers and eddy-current dynamometers, the other is ...


    By HORIBA Europe GmbH

  • Sample Preparation for Refuse Derived Fuels

    Plastic, wood and shredded waste, are in times of rising crude oil prices very interesting additions to the classic fuels. Especially in the cement industry, the energy rich fractions from conditioning processes are readily burned along. Important here is the analytical evaluation of the materials. Refuse derived fuels: Plastic, wood and shredded waste: Here are some examples of more or less well ...


    By Fritsch Milling and Sizing

  • Temporal changes in the sensitivity of coastal Antarctic zooplankton communities to diesel fuel: A comparison between single‐ and multi‐species toxicity tests

    Despite increasing human activity and risk of fuel spills in Antarctica, little is known about the impact of fuel on Antarctic marine fauna. The authors performed both single‐ and multi‐species (whole community) acute toxicity tests to assess the sensitivity of an Antarctic coastal zooplankton community to the water‐accommodated fraction of Special Antarctic Blend diesel. Single‐species tests ...


    By John Wiley & Sons, Ltd.

  • Remote metallographic examination of mixed carbide fuel of fast breeder test reactor in radiometallurgy laboratory

    Fast breeder test reactor (FBTR) uses unique, indigenously developed mixed carbide of plutonium and uranium (70% PuC + 30% UC) as fuel. The performance of the fuel was studied at different burn-ups by carrying out post-irradiation examinations (PIE) to facilitate prediction and extension of life for the indigenously developed fuel. As a part of PIE, remote metallography was carried out to study ...


    By Inderscience Publishers

  • Fuel inefficiency frozen out at Findus

    The installation of the proven Maxsys Fuel System at the Benton Lane, Newcastle plant of Findus has reduced the natural gas consumed by its three boilers by 6.6%. This substantial saving will allow the company to recoup the outlay on its investment within an impressively brief 12 month period. Findus is a household name in frozen food. Few can claim never to have ...


    By Maxsys Fuel Systems Ltd

  • Is `Dark Fuel` the same as `Bad Fuel` and can I still use it?

    Algae-X FAQ’sIs 'Dark Fuel' the same as 'Bad Fuel' and can I still use it?This is a question many of us have asked more than once. And what we really want to know is: 'Will the stuff damage my engines?' Engines are expensive, ruining an engine is costly and operating an engine on 'bad fuel' is not wise. We all know that most engine failures start in the fuel tank. When all mechanical parts ...


    By AXI International

  • Fuel Cell Voltage Monitoring Considerations

    Knowing what’s happening inside a fuel cell is a critical function, especially as fuel cells are continuing to be developed. One important aspect of this is to measure the voltageof each cell in a stack. Although this may sound trivial, it can be more complex and more expensive than it may at first appear due to high voltages, high channel counts,communication types, etc. There ...


    By Fuel Cells Etc

  • Cutting holes for testing vs. testing for holes

    When it comes to geomembrane quality assurance, are destructive testing practices as effective as basic leak detection technologies? The function of a geomembrane liner is to prevent liquid flow to the environment. CQA measures should be judged on how effective they are in meeting this requirement. This article critically examines the industry’s current means of providing confidence ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you