fume control technology Articles

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • Removal of vehicle exhaust fumes at fire stations

    The challenge The fire brigade of Kassel (Germany) was looking for three new vehicle exhaust extraction systems. Systems that would remove exhaust fumes very effectively, protecting the fire fighters from hazardous diesel exhaust fumes. Other fire stations within the Kassel region were already provided with extraction systems. The fire brigade of Kassel choose for a fully ...


    By Plymovent Group BV

  • Fume Scrubber for Grain Etch, Metal Finishing, and Other Operations Generating Fumes and Gases

    World's Largest Investment Casting Company Selects Tri-Mer for Air Pollution Control. Tri-Mer engineered and built air pollution control equipment for Alcoa Howmet's grain etch facility, which houses two process lines.  Contaminants include hydrochloric acid, ferric chloride and phosphoric acid. The phosphoric acid line includes a Tri-Mer Vertical Flow (V-F) Scrubber, and 6-stage tank line. ...


    By Tri-Mer Corporation

  • Controlling acid gas mists

    Gas cleaning New and strict pollution regulations in metallurgical plants worldwide are restricting particulate and acid gas emissions to extremely low levels. Because of that, sulphuric acid plants are being installed to remove and utilise S02 in gases resulting from the roasting of sulphide ores, smelting of ores, and burning or regeneration of spent acid or acid sludge from ...


    By Beltran Technologies, Inc.

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Mastertaste Savors the Benefits of Cost-Effective Odor Control

    The aromas from savory flavors are detectable even at low concentrations, and pose special challenges for companies who manufacture or use them.    Mastertaste, (Clark, N.J.) a Division of Kerry Group plc, is a leader in the development and production of savory flavors and blended seasonings.  As part of a plant expansion, Mastertaste needed a system to eliminate odors from ...


    By Tri-Mer Corporation

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • Gas Monitoring for Ventilation Control and Energy Management

    The growing demand for underground and enclosed parking and maintenance garages (resulting from limitations on land availability) has increased the awareness and need for proper ventilation and control systems. In addition, increased health and safety programs have only added to the concerns of toxic and combustible gases in confined or enclosed spaces. Historically, ventilation and make-up air ...


    By Arjay Engineering Ltd.

  • Air Pollution Control Using Catalytic, Regenerative or Recuperative Systems

    For companies in a variety of industries, the clock is ticking regarding their compliance with local, state and federal clean air requirements. The need to provide adequate emission controls still looms on the horizon as these companies explore the various equipment and technology options available to them. While the guidelines regarding air pollution control are consistent by industry, a ...


    By The CMM Group, LLC

  • Air pollution control for the fertilizer industry in the Middle East - Case Study

    Through our subsidiary company, APC Process Engineering, ERG has an impressive track record in the Middle East Fertilizer Production Industry. All our systems come with a performance guarantee backed by more than 30 years of experience successfully treating industrial air pollution around the world. ERG’s systems are used for treating silica, phosphate rock and scale dust, ammonia, hydrogen ...

  • What to consider when selecting lighting connection and control products for schools & universities - Case Study

    The Government’s £4.4 billion Priority School Building Programme is well underway and by the end of 2021 a total of 537 schools will have been rebuilt or refurbished. When designing the lighting scheme for a new or refurbed school, there are many things to consider including time constraints, regulations, energy-efficiency and special client requirements. The development of new ...


    By Flex Connectors Ltd

  • Chemical Industry: HCL System Exceeds Current Regulations Emission control meets requirements while recovering by-product for sale Case Study

    Chemron manufactures high-quality specialty chemicals and surfactants for personal care products, industrial, institutional, oil field, mining, coatings, lubricants and water treatment. Some of the operations result in the creation of hydrochloric acid with high variable rates. As expressed by Bill Frost, of Chemron: “Chemron maintains a strong environmental commitment, which views ...


    By CR Clean Air Group, LLC

  • Exceeding expectations: Safer and better – for all!

    Elkem has production facilities worldwide and is a global leader in environment-friendly production. In order to reduce emissions to a minimum and increase the employee’s safety at the facilities, Elkem cooperate with NEO Monitors. At Elkem's plant in Salten, Norway, silicon is produced from quartz in a high temperature process using coal and coke as reducing agents. The silicon is ...


    By NEO Monitors AS

  • MSD’s Morris forman water quality treatment center - Dual stage custom system - Case study

    Summary MSD’s Morris Forman Water Quality Treatment Center is designed to treat 120 MGD of raw wastewater. In addition, all of the biosolids from Louisville’s other treatment plants are processed at the Morris Forman plant. Up until several years ago, air from much of the solids handling processes were treated by ...


    By Biorem Technologies Inc.

  • Case study - High reactivity Metakaolin utilized in high performance Virginia bridge

    The Virginia Department of Transportation and Marshall Concrete Products have included Headwaters Resources’ HRM modified concrete as one of the high performance concrete mixes for the Virginia DOT “Smart Road” research project. Unlike most research that investigates one item on a limited scale in a laboratory, the Smart Road is a $35 million combined construction and research ...


    By Boral Resources LLC

  • Process-generated contaminants

    Overview: There is not currently a formal and universally recognised definition of a process-generated substance. Process-generated contaminants can be generated as emissions from combustion processes, abrasion and/or other processes that physically or chemically degrade or otherwise modify the starting material(s), e.g. degradation/composting of organic materials. Such ...

  • Automation of energy management system in Rourkela steel plant: a case study

    The growth of economy and population worldwide has caused heavy increase in demand for energy and steel. The source of energy is reducing day by day. The steel sector is one of the largest consumers of energy. Lot of measures to make the steel sector energy efficient is to be taken such as improving technology and automation of various departments. Integration of information systems for ...


    By Inderscience Publishers

  • High Tech Research Centre - Case Study

    The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...


    By Western Air Ducts (UK) Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you