fume extraction equipment Articles

  • Flexible welding fume extraction system in plant

    The challenge VAM Drilling (Vallourec Mannesmann Oil & Gas Nederland BV) is located in Heerhugowaard, the Netherlands. This facility has been around for over 40 years. Approximately 20 employees are turning/welding in the plant on a daily basis. Sometimes even 24 hours a day, if projects need to meet certain ...


    By Plymovent Group BV

  • No more complaints about welding fumes

    The challenge In 2003 Voortman Staalbouw moved to a new workshop of 140 m long x 22 m wide. During the design stage they took purchasing a welding fume filtration system into consideration. In view of the stringent environmental legislation and to meet the TLV values for welding fumes, Voortman strongly focused on ...


    By Plymovent Group BV

  • Mobile welding fume extractors ensure flexibility

    The challenge Harsveld Apparatenbouw BV employs approx. 50 staff members, of which 35 welders. All welders are certified and ‘all-round’ (MIG/MAG, TIG, stick welding, etc.) and continuously work with diverse, mostly high-grade metals. The diversity of the welding operations results in welding ...


    By Plymovent Group BV

  • Retrofit Intelligent Dust Extraction System

    Western Air Ducts Retrofits Intelligent LEV Solution at City of Oxford College The proffesionally equiped woodworking workshop at the Rycotewood Furniture Centre, at the City of Oxford College city centre campus, is a key resource for the many students of furniture design and ...


    By Inteliair Ltd

  • Multiple arms improve work environment

    The challenge As a result of the annual review of G.C. Entreprise, Køge ApS' work environment, it was decided to obtain a new extraction system. The service workshop needed a high-quality extraction system to remove welding fumes, grinding dust and oil mist, preventing accumulation in the workshop. ...


    By Plymovent Group BV

  • Health and safety at work

    The challenge The production activities of equipment such as cooling towers, condensers and cooling installations in aid of air conditioning systems require a lot of metalworking and welding. Baltimore Aircoil concluded for itself that the extraction of welding fumes and hazardous gases in the production halls could be ...


    By Plymovent Group BV

  • Liquid waste off-gas treatment - Case Study

    Application Biffa Waste Services operate a major waste disposal site at Kilsyth in Scotland where they handle many types of industrial liquid effluent. This can give rise to a range of emissions from both the tank farm and the road tanker deliveries. In addition, significant NO2 and nitric acid fume releases can arise from process upset conditions. ERG provided an emergency NO2 ...

  • New Inspection Facility

    CPS was awarded the contract to design and build a new inspection facility for a specialist alloy manufacturer. The contract included the design and construction of a new production building, electrics and processing equipment. The building works included the design and construction of a new building complete with 6 hoist overhead crane, production office and bunding with chemical resistant ...

  • Healthy conditions in training centre

    The challenge CENFIM’s objective is to educate highly qualified and specialised employees for the metallurgical industry in Portugal. They organise courses of various durations and at various levels. The Portuguese metal industry counts approx. 19,000 companies, employing a total of 190,000 people. In the ...


    By Plymovent Group BV

  • Work Safely in Dusty Environments

    Dust is a term used to describe all airborne particles – these can be wood, stone, flour, concrete, grain, mould or asbestos particles as well as fumes and chemicals. Many activities create dust. Larger dust particles get lodged in the nose and throat while the smaller more dangerous particles get lodged deep in the lungs – these dust particles are the ones that can cause fatal ...


    By DustWatch CC

  • High Tech Research Centre - Case Study

    The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...


    By Inteliair Ltd

  • Detection of PCB on gauze wipes

    MATRIX: Cotton gauze pad (wipe) ANALYTE: PCB RANGE OF DETECTION: Low range: 5 to 100 mg per wipe, High range: 25 to 500 mg per wipe MATERIALS: PCB RaPID AssayÒ Kit and Sample Diluent. RaPID Prepä PCB Sample Extraction Kit. Reagents: hexane (pesticide grade). Equipment: 3 inch x 3 inch cotton gauze pads ...


  • Detection of 2,4-D in citrus juice

    MATRIX: Fresh squeezed fruit juice, canned 100% fruit juice or frozen juice concentrates of citrus fruits ANALYTES: 2,4-Dichlorophenoxyacetic acid (2,4-D) RANGE OF DETECTION: 10 to 500 ppb in juice or 40 ppb to 2 ppm in juice concentrates MATERIALS: 2,4-D RaPID AssayÒ Kit and Sample Diluent. Reagents: methylene ...


  • Solid Waste Reduction: Insulform Pty Ltd

    Insulform Pty Ltd is a medium sized Melbourne based company that manufactures trim and insulation components for the automotive industry. Reformulation of the raw material and the process used to manufacture rear parcel shelves for passenger vehicles has resulted in significant cost savings, with reduced price to the customer, and the elimination of a significant solid waste stream. ...


  • Why You Need a Carpet Steam Cleaner That Can Take the Heat?

    When it comes to tackling the most difficult types of dirt and sedimentation in carpets, a carpet steam cleaner can be both fast and effective. To deal with a particularly stubborn stain or sediment, people still think that opting for chemical cleaning agents is the best bet. While these cleaning agents might be able to clean certain kinds of stains, they cannot eliminate many difficult types of ...


    By Daimer Industries Inc.

  • Car Pressure Washer and Steam Cleaner for Complete Auto Detailing

    A car pressure washer is the ideal cleaning machine for exterior detailing jobs. Power washers with pressure levels of 1500 psi or less and water flow rate of 0.5 GPM clean effectively without wasting water or causing any damage to the vehicle body. These units also come with steam temperatures of 250°F for extra cleaning power. Pressure washing machines are also versatile and clean various ...


    By Daimer Industries Inc.

  • Carpet Cleaning Machines That Can Handle High Traffic

    Choosing carpet cleaning machines to handle high-traffic carpet cleaning might seem like an overwhelming task. Carpets in areas like hotel lobbies, movie theaters, and office reception rooms can all collect large amounts of dirt and debris, even in a single day. High traffic areas don’t just deal with constant streams of traffic, they also deal with different kinds of dirt deposits. For ...


    By Daimer Industries Inc.

  • A.E.S. 1977 paper to with plating emission problems

    A.E.S. PAPER The following paper has NOT been altered whatsoever. Some notes a) A.E.S. stands for American Electroplating Society. b) the mention of l¼ million cfm is now incorrect as it is well over 3 million cfm c) The Grandview E.C.E. scrubber is a condensed name for Eliminate, Coalesce, Eliminate …. and this design is called by various names such as LMS …low micron scrubber and LMITS …low ...


  • The Best Steam Cleaner can make Bathroom Cleaning a Breeze

    The best steam cleaner can be found for a wide range of cleaning applications. While certain units are well-suited to spot-cleaning upholstery, others are a perfect fit for industrial cleaning tasks. Some machines help make the task of gum removal a breeze. Still others help to sanitize surfaces. While these units are often used in different commercial and industrial applications, they are also ...


    By Daimer Industries Inc.

  • Tips To Buy Best Conveyor Belt Cleaning Machines

    Choosing the right conveyor belt cleaning machines ensures top performance and long life of conveyor belts. Similarly, choosing the right machines to clean the belts also ensures efficient performance of the machines. If a conveyor belt breaks down during the peak business hour, it can cause all kinds of chaos. It is advisable to use the best conveyor belt cleaning machines to keep the belts in ...


    By Daimer Industries Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you