fume extraction system Articles

  • Flexible welding fume extraction system in plant

    The challenge VAM Drilling (Vallourec Mannesmann Oil & Gas Nederland BV) is located in Heerhugowaard, the Netherlands. This facility has been around for over 40 years. Approximately 20 employees are turning/welding in the plant on a daily basis. Sometimes even 24 hours a day, if projects need to meet certain ...


    By Plymovent Group BV

  • Retrofit Intelligent Dust Extraction System

    Western Air Ducts Retrofits Intelligent LEV Solution at City of Oxford College The proffesionally equiped woodworking workshop at the Rycotewood Furniture Centre, at the City of Oxford College city centre campus, is a key resource for the many students of furniture design and ...


    By Inteliair Ltd

  • Clean and fume free environment for students

    The challenge A new facility was erected at the Vredenburg Campus (South Africa) in December 2008. Ventilation was not considered in the development stage of the facility and was, therefore, very poor with only natural air flow through open doors and windows and some ‘whirlybirds’ in the roof of the ...


    By Plymovent Group BV

  • No more complaints about welding fumes

    The challenge In 2003 Voortman Staalbouw moved to a new workshop of 140 m long x 22 m wide. During the design stage they took purchasing a welding fume filtration system into consideration. In view of the stringent environmental legislation and to meet the TLV values for welding fumes, Voortman strongly focused on ...


    By Plymovent Group BV

  • Removal of vehicle exhaust fumes at fire stations

    The challenge The fire brigade of Kassel (Germany) was looking for three new vehicle exhaust extraction systems. Systems that would remove exhaust fumes very effectively, protecting the fire fighters from hazardous diesel exhaust fumes. Other fire stations within the Kassel region were already provided with extraction systems. The fire brigade of Kassel choose for a fully ...


    By Plymovent Group BV

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech

  • Ducted or Ductless Fume Hoods? Is this the real issue?

    Most laboratories will need some form of fume cabinet at some point. The type of cabinet is usually the starting point of the process, and the choice of either ductless or ducted cabinet is made. With the ever increasing need to save money and to be environmentally responsible there are other considerations that need to be explored before a decision can be reached. ...


    By Camlab Limited

  • Electronics Industry: Silicon Tetrachloride Fume Problem Solved Electronics industry Two-Stage Scrubber system Solves Fume Proble case study

    A two-stage Jet-Venturi scrubber/packed tower system solved a number of pollution problems for an Albany, Oregon, company. The Zirconium Extraction Div. of Teledyne Wah Chang produces high-quality reactor-grade zirconium and hafnium ozide using a chemical separation process. The zirconium and the hafnium are chlorinated and then formed into pure metals for the nuclear and chemical process ...


    By CR Clean Air Group, LLC

  • Chemical Industry: Silicon Tetrachloride Fume Problem Solved Ccase Study

    A two-stage Jet-Venturi scrubber/packed tower system solved a number of pollution problems for an Albany, Oregon, company. The Zirconium Extraction Div. of Teledyne Wah Chang produces highquality reactor-grade zirconium and hafnium ozide using a chemical separation process. The zirconium and the hafnium are chlorinated and then formed into pure metals for the nuclear and chemical process ...


    By CR Clean Air Group, LLC

  • Award Winning Large Diameter FRP Stacks For Magnesium Extraction Plant

    When Fabricated Plastics Limited of Maple (Toronto), Ontario, Canada was awarded a contract by a world renowned Mining/Metallurgical Company, it proved to be a chance to exhibit their engineering excellence in several ways. First they had to demonstrate that their proposed use of Fibreglass Reinforced Plastic (FRP) was clearly the material of choice in competition with other materials. Then they ...


    By Fabricated Plastics Limited

  • Ventilation/filtration system is main heat source

    The challenge K.S. Smede og Montage, a smith’s working-place, was about to expand their business and move to new premises. As they were expanding, K.S. Smede og Montage took this opportunity to purchase a new ventilation/filtration system to extract welding fumes and grinding dust more effective. One of the ...


    By Plymovent Group BV

  • Fort Dix combined maintenance facility features Monoxivent source capture systems

    Job Name: Fort Dix Combined Maintenance Facility Location: Fort Dix, NJ Monoxivent Representative: Effective Controls East, Larry Frantz Summary: Effective Controls East, an authorized Monoxivent representative, was awarded the opportunity to provide motorized retractable hose reels, exhaust fans, and all necessary ...


    By Monoxivent

  • Automation of energy management system in Rourkela steel plant: a case study

    The growth of economy and population worldwide has caused heavy increase in demand for energy and steel. The source of energy is reducing day by day. The steel sector is one of the largest consumers of energy. Lot of measures to make the steel sector energy efficient is to be taken such as improving technology and automation of various departments. Integration of information systems for ...


    By Inderscience Publishers

  • Pennsylvania air national guard uses exhaust removal system

    Monoxivent’s 9000-MTR Hose Reel was used to remove toxic exhaust fumes from military vehicles at the Pennsylvania Air National Guard. Monoxivent's motor-operated hose reels are the premier solution to exhaust extraction. They provide the answer for customers who have obstructions, which prohibit the use of other types of overhead-exhaust systems.  At the Air National Guard facility, ...


    By Monoxivent

  • Multiple arms improve work environment

    The challenge As a result of the annual review of G.C. Entreprise, Køge ApS' work environment, it was decided to obtain a new extraction system. The service workshop needed a high-quality extraction system to remove welding fumes, grinding dust and oil mist, preventing accumulation in the workshop. ...


    By Plymovent Group BV

  • Liquid waste off-gas treatment - Case Study

    Application Biffa Waste Services operate a major waste disposal site at Kilsyth in Scotland where they handle many types of industrial liquid effluent. This can give rise to a range of emissions from both the tank farm and the road tanker deliveries. In addition, significant NO2 and nitric acid fume releases can arise from process upset conditions. ERG provided an emergency NO2 ...

  • Health and safety at work

    The challenge The production activities of equipment such as cooling towers, condensers and cooling installations in aid of air conditioning systems require a lot of metalworking and welding. Baltimore Aircoil concluded for itself that the extraction of welding fumes and hazardous gases in the production halls could be ...


    By Plymovent Group BV

  • New Inspection Facility

    CPS was awarded the contract to design and build a new inspection facility for a specialist alloy manufacturer. The contract included the design and construction of a new production building, electrics and processing equipment. The building works included the design and construction of a new building complete with 6 hoist overhead crane, production office and bunding with chemical resistant ...

  • Healthy conditions in training centre

    The challenge CENFIM’s objective is to educate highly qualified and specialised employees for the metallurgical industry in Portugal. They organise courses of various durations and at various levels. The Portuguese metal industry counts approx. 19,000 companies, employing a total of 190,000 people. In the ...


    By Plymovent Group BV

  • High Tech Research Centre - Case Study

    The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...


    By Inteliair Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you