fume filter Articles

  • TopAir`s Fume Hood

    TopAir, Statitech Israel’s flagship brand, manufactures a full line of superior cleanroom equipment including a reliable fume hood for neutralizing potential airborne chemical hazards in the laboratory. The fume hood mechanism offers maximum protection to laboratory staff working at a cleanroom table under the fume hood.   There are two basic types of fume hood. Many industries use a ...


    By TopAir Systems

  • TopAir’s Ductless Fume Hood

    TopAir is the flagship brand of Statitech Ltd., a leading developer, producer and marketer of a wide variety of standard and custom-made cleanroom products for the electronic, semi-conductor, medical and defense industries. Statitech has acquired a well earned reputation as a market leader in its field. Customers include the pharmaceutical giant Teva Industries Ltd., Israel Aircraft Industries ...


    By TopAir Systems

  • Portable Weld Fume Collectors

    There are some important considerations when choosing a portable weld fume collector. First, airflow: Generally you need 900 to 1500 CFM for a small, portable unit to be an effective ventilation tool for welding operations. Second, filtration: There are a few critical elements to consider here. Make sure you have a spark ...


    By ProVent, LLC

  • Control of Welding Fume Particulates Using Cleanable Filter Media: Hexavalent Chromium

    Herein, a Sentry Air Systems product study of hexavalent chromium particles, [Cr(VI)], is reported. Due to the popularity of extended life cleanable filter media and health concerns regarding hexavalent chromium exposure in the work place, Sentry Air Systems conducted a study of the efficacy of cleanable filter systems for the maintenance of safe breathing conditions during welding operations ...


    By Sentry Air Systems, Inc.

  • No more complaints about welding fumes

    The challenge In 2003 Voortman Staalbouw moved to a new workshop of 140 m long x 22 m wide. During the design stage they took purchasing a welding fume filtration system into consideration. In view of the stringent environmental legislation and to meet the TLV values for welding fumes, Voortman strongly focused on ...


    By Plymovent Group BV

  • Clean and fume free environment for students

    The challenge A new facility was erected at the Vredenburg Campus (South Africa) in December 2008. Ventilation was not considered in the development stage of the facility and was, therefore, very poor with only natural air flow through open doors and windows and some ‘whirlybirds’ in the roof of the ...


    By Plymovent Group BV

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech

  • Ducted or Ductless Fume Hoods? Is this the real issue?

    Most laboratories will need some form of fume cabinet at some point. The type of cabinet is usually the starting point of the process, and the choice of either ductless or ducted cabinet is made. With the ever increasing need to save money and to be environmentally responsible there are other considerations that need to be explored before a decision can be reached. ...


    By Camlab Limited

  • Flexible welding fume extraction system in plant

    The challenge VAM Drilling (Vallourec Mannesmann Oil & Gas Nederland BV) is located in Heerhugowaard, the Netherlands. This facility has been around for over 40 years. Approximately 20 employees are turning/welding in the plant on a daily basis. Sometimes even 24 hours a day, if projects need to meet certain ...


    By Plymovent Group BV

  • Industrial Hygiene Report: Control of Hexavalent Chromium Welding Fume - Non-cleanable Filter Media

    Sentry Air Systems, Inc. manufactures equipment designed to capture  welding fume and/or other air contaminants and, after filtering, return the cleansed air to the local environment. For the purposes of this test, SAS wanted to determine the effectiveness of the Model 300 Welding Fume Extractor and filter media against Hexavalent Chromium fume commonly found during the welding of stainless ...


    By Sentry Air Systems, Inc.

  • Custom welding booth and downdraft tables remove fumes in learning center

    Monoxivent partnered with S.J. Smith Co. to provide custom welding booths and downdraft tables to remove toxic welding fumes.  S.J. Smith is a regional welding distributor that actively promotes the Monoxivent product line. An international manufacturer wanted to construct a welding school in their facility where current employees could learn new technologies, as well as update skills. The ...


    By Monoxivent

  • Expanding Reservoir Air Filters

    In all vented tanks, the rise and fall of fluid levels is offset by a corresponding volume of incoming and outgoing air. Keeping the incoming replacement air clean is essential for contamination control and thus the reliability of hydraulic systems. While targeting the system's reliability, JLM Systems Limited has developed the OilMiser™ Reservoir Aspirator (ORA) kit. This product represents a ...


    By JLM Systems Ltd

  • DownSpout StormFilter™ filter systems help galvanizing facility cut zinc by 87 percent

    Untitled Document Since 1967, San Diego Galvanizing has been hot-dipping structural steel, pipe and railings in zinc . Product applications include commercial and residential uses ranging ...


  • Healthy conditions in training centre

    The challenge CENFIM’s objective is to educate highly qualified and specialised employees for the metallurgical industry in Portugal. They organise courses of various durations and at various levels. The Portuguese metal industry counts approx. 19,000 companies, employing a total of 190,000 people. In the ...


    By Plymovent Group BV

  • Multiple arms improve work environment

    The challenge As a result of the annual review of G.C. Entreprise, Køge ApS' work environment, it was decided to obtain a new extraction system. The service workshop needed a high-quality extraction system to remove welding fumes, grinding dust and oil mist, preventing accumulation in the workshop. ...


    By Plymovent Group BV

  • Portable Dust Collectors can be very useful

    Thousands of industrial and commercial settings worldwide use portable dust collectors. Processes that create fumes, dust, mist or smoke require this system, as it is not only essential to remove the dust, but also ensures both the employees and work environment are safe. Design of a Portable Dust Collector ...


    By ProVent, LLC

  • TopAir’s Clean bench

    The clean bench is a mainstay of TopAir’s superior line of cleanroom equipment for all requirements of the biomedical, electronic, semi-conductor and defense industries. TopAir is the flagship brand of Statitech Ltd., a leading provider of cleanroom furniture and accessories since 1999. Besides the clean bench, TopAir’s premium line includes fume hoods, desiccators, weighing stations ...


    By TopAir Systems

  • Reduction of Solvent Use in Cleaning of Printing Screens: Cutler Brands

     The installation of new cleaning equipment at Cutler Brands printing works in Adelaide, South Australia, has resulted in a 40 percent reduction in cleaning solvent used and an annual saving of almost $165,000. Not only was the investment of $45,000 recouped in 4 months through savings and increased productivity, but exposure of employees to hazardous fumes and chemicals substantially ...


  • Technical brief - containment for industrial services in marine, offshore & petrochemical sectors

    Conventional scaffold sheeting is an established method of providing temporary containment and weather protection for scaffold structures.  Material selection should reflect the application, the anticipated weather conditions and the expected duration of the project.  Furthermore, stringent Flame Retardant requirements for covering materials are specified on most projects. There are ...

  • TopAir`s Pass Box

    A pass box is a structure located at the entrance to a cleanroom that enables materials to be transported between the cleanroom and the rest of the laboratory without compromising the sterility of the materials or surrounding cleanroom area. The pass box allows laboratory personnel to stay within the cleanroom instead of moving to different parts of the lab to fetch tools or materials, therefore ...


    By TopAir Systems

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you