furan emissions Articles
-
A Case Study in Implementation of the National Emission Standard for Hazardous Air Pollutants for the Portland Cement Industry at a Major Source
The regulations at 40 CFR 63, Subpart LLL are commonly known as PC MACT because the rule establishes the maximum available control technology for hazardous air pollutants (HAPs) from portland cement plants in the United States. There are 188 HAPs specified in Section 112 of the Clean Air Act Amendments of 1990. Two classifications of HAP emitters are specified in 40 CFR 63. Major sources of HAPs ...
-
New developments in long-term sampling of dioxins
Introduction The emissions of Dioxins and Furans (Polychlorinated Dibenzodioxins and Dibenzofurans, PCDF/Ds) from industrial sources are still one of the most important issues discussed in public, politics and industry. Due to the fact that environmental regulations are on the way to be harmonised in the EU countries, the measurements of those compounds in the stack gas of e. g. waste ...
-
Long-term sampling - A method for continuous emission monitoring of dioxins/furans and mercury
Introduction The continuous emission monitoring of the different compounds which are emitted by industrial facilities is an important topic to approve the compliance to different regulations like WID. However, there are several compounds which cannot be measured in real time. Specific dioxins/furans (PCCD/PCDF) and other POPs (Persistent Organic Pollutants) cannot be measured by online monitors. ...
-
New boiler MACT and affiliated rules proposed
EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...
-
Pollution monitoring in Cement Industry
The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...
By ENVEA
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you