gas analyser manufacturers Articles

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical ...


    By Gasmet Technologies Oy

  • Analysers and next generation SRU control

    The history of on-line process analytics is a relatively short one. Development was driven by the need for process control of high value hydrocarbonbased products. The first on-line analyser applications came during the second war. Rapid development came in the 1970s with the advent of the microprocessor and resultant chemometric techniques. Led by Phillips Petroleum, Union Carbide and Dupont ...

  • Case study - Geotech’s first GA5000 landfill gas analyser takes 100,000 readings for SUEZ environnement

    Geotech’s first GA5000 analyser, manufactured three years ago, was recently spotted in the company’s calibration rig.  This portable landfill gas monitor was the first production unit of the newly launched GA5000 gas analyser range and has prompted Geotech to look into the analyser’s life since then. The analyser was on its sixth service since manufacture, under ...

  • Systech`s gas analysers used in custom built glove boxes - Case Study

    For precise monitoring of oxygen and other gases in glove box systems, Pyramid Engineering use the EC900 oxygen analyser and 542 binary gas analyser. Since 1990, Pyramid Engineering Services have been developing their range of glove boxes. They provide a perfectly controlled environment for handling and assembly applications in many industries. Originally designed to complement Pyramid’s ...


    By Systech Instruments Ltd

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Are environmental monitoring manufacturers pulling a fast one with back-to-base servicing?

    Geotech's users of environmental monitoring equipment are not alone in their frustration at having valuable equipment unavailable when they require servicing.  Is this just a money-making scam?  What do users get for their money?  By combining maximum possible local support with a 100-point factory full service schedule, Geotech believe they have the best balance of user ...

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • An Evaluation of Hydrogen as a Carrier Gas in Gas Chromatography: FREE Whitepaper

    Anthias Consulting has collaboratively written an application note on the use of hydrogen as a carrier gasfor the analysis and detection of pesticides in drinking water. The paper evaluates the use of an on-site generated hydrogen carrier gas vs. helium as the carrier gas for USEPA Method 551.1, which analyses the concentration of pesticides in drinking water by liquid-liquid ...


    By Anthias Consulting Ltd.

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • Natural gas as a promising alternative fuel for passenger cars

    The present work (as a field study) investigated the role of compressed natural gas (CNG), as an automotive fuel in CO, HC and CO2 emissions in vehicle exhaust. Besides evaluating the influence of the fuel-feed systems into their cylinders on a vehicular emission level, two different systems were examined; electronic fuel-injection and well-carburetted engines. The chosen vehicles were ...


    By Inderscience Publishers

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • U.S. Natural Gas Exports: Friend or Foe?

    U.S. natural gas production is booming. According to the Energy Information Administration (EIA), production grew by 23 percent from 2007 to 2012. Now—with production projected to continue growing in the decades ahead—U.S. lawmakers and companies are considering exporting this resource internationally. But what are the climate implications of ...

  • Case study - N°NG1 – Natural gas monitoring – Medor Exp

    Context & Challenges Natural gas used for household consumption typically contains odorant sulfur components for safety reasons. As natural gas is normally odorless, the sulfur components are artificially added. When natural gas is transported between various companies, regions or countries, gas companies have to verify that the sulfur species are present as specified. ...


    By Chromatotec Group

  • Generation using gas-fuelled engines in South Africa – an overview

    Most gas engines are Otto cycle spark ignition internal combustion reciprocating engines using natural gas as the primary fuel. Smaller models utilise stochiometric combustion while the larger engines are lean burn engines with pre-chamber ignition systems. The engines are coupled with packaged generator sets, ...


    By Clarke Energy

  • Process analytics optimizes crude gas processing for the production of fine chemicals at Lonza – Case Study

    Fine chemicals are used as active ingredients or additives in the pharmaceutical and food & beverages industries, as well as in agriculture. The cracking of raw materials such as light virgin naphtha or liquefied gas results in intermediate products (ethylene, hydrogen, methane, CO2). At the end of the process chain, these can provide highly pure materials such as niacin (vitamin B3) or ...

  • The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe

    POLLUTION S.r.l. manufactures POLARIS FID analyser, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you