gas analysis equipment Articles

  • Online Dissolved Gas Analysis

    Transformer and Load Tap Changer (LTC) assets are among the most expensive pieces of equipment for electric utilities. Preserve these assets by using an appropriate DGA (Dissolved Gas Analysis) diagnostic method to improve service reliability, avoid transformer failure, and defer capital expenditures for new transformer ...

  • Food packaging designs tested using Systech Illinois gas analysis equipment - case study

    At the Loughry Campus, Systech Illinois' headspace gas analyzer and oxygen permeation analyzer are used in the testing of food packaging. Located in Cookstown, County Tyrone, Northern Ireland, Loughry Campus offers educational and training programmes in all elements of Food Management. Students have access to a purpose built food technology centre and laboratories where they can develop ...


    By Systech Instruments Ltd

  • Analysis of Natural Gas Products by GC / TCD / FID

    The complex mixture of condensible hydrocarbons and permanent gases in a natural gas product has historically been separated on gas chromatographs equipped with dual columns and a switching valve. The light gases are separated from heavier compounds on a molecular sieve column, which is then backflushed onto a suitable column to separating the rest of the mixture. The Buck Scientific Model 910 ...


    By Buck Scientific Inc

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Landfill gas analysis telematics in Slovenia case study

    Application Landfill - waste to energy Equipment AEMS Location Novo Mesto, Slovenia Customer AFS client, Minerva Žalec d.d Requirement The customer specified a 6-channel landfill gas analyser with secure online internet access for data transmission. ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Mercury Analysis

    Characteristics of Mercury What is Mercury? Mercury is a naturally occurring silver-colored metallic element noted for its occurrence as a liquid at room temperature and toxic to living organisms. This silvery, opaque liquid metal is very dense, yet has a high surface tension that causes it to form tiny perfect spheres in the pores of the rocks it is found in. It is ...


    By HORIBA Europe GmbH

  • Sensitivity analysis in a simulated auto thermal Natural Gas reforming process

    Auto Thermal natural gas Reforming (ATR) is one of the mostly used conventional hydrogen generation technologies by the highly developed countries. ATR reactors do not need any direct or indirect heat exchanger, and that is why they are more compact and so preferable than the other reformers. In this study, a process including reformers, carbon dioxide sequestration and a cryogenic separation ...


    By Inderscience Publishers

  • Headspace gas and oxygen permeation analysis of food packaging designs - Case Study

    Food packaging designs tested using Systech Illinois gas analysis equipment At the Loughry Campus, Systech Illinois' headspace gas analyzer and oxygen permeation analyzer are used in the testing of food packaging. Located in Cookstown, County Tyrone, Northern Ireland, Loughry Campus offers educational and training programmes in all elements of Food Management. Students have ...


    By Systech Instruments Ltd

  • Fast GC In Environmental Analysis

    Fast GC can be practical for many environmental analyses, and may not require a major investment in new equipment.  By applying the techniques of Fast GC such as, using shorter, narrower bore columns, faster oven temperature ramp rates, hydrogen carrier gas, and by taking advantage of the variety of column chemistries available in fast dimensions, analyses times can be significantly reduced ...


    By MilliporeSigma

  • Case study - Oil analysis - House Calls - Help reduce offshore equipment failures

    A new approach It is hard to think of another environment where an equipment failure could have a greater negative impact on employee safety and lost production than an offshore oil and gas production platform. Yet offshore platforms are among the world’s most difficult locations to operate and maintain equipment. In most cases, skilled people and supplies can only reach the ...


    By Spectro Scientific

  • Modeling Analysis of Fuel Sprays

    Current engine development processes in which computations play an important role have sought for numerical models which can accurately represent phenomena in spray combustion. The authors have developed original sub-models taking into account the effects of extensive spray combustion phenomena including nozzle cavitation, droplet breakup behavior, multi-component evaporation process, spray-wall ...


    By HORIBA Europe GmbH

  • Compost Data Tracking And Analysis

    From tip fee invoice tracking to process control to compost product sampling, information gathering, analysis and reporting are key to successful facility operations.   COMPOSTING is a highly regulated component ...


    By BioCycle Magazine

  • CFD Analysis for NOx-Control in a Refinery

    Refineries are required by law to reduce the emission of nitrous oxides (NOX) to the atmosphere. Spray nozzles are key components in the gas conditioning equipment used to control the humidity and temperature of the gases, providing controlled volumes of liquid with predictable drop size and consistent spray coverage. Knowing these values is vital for the optimization of gas conditioning ...


    By Spraying Systems Co.

  • China Environmental Protection Equipment Market Report

    This report presents a clear picture about the overall development of environmental protection equipment market in China and the trend in recent years based on detailed data analysis. This report includes the analysis on the environmental protection equipment market size and market share in China, the study on major hot areas in this market, introduction of key data and the comparison of major 10 ...


  • Applications of a Portable Gas Spectrometer

    In the realm of natural gas processing, enterprises don’t always find it economical to send products back to the lab and wait for test results. Being able to perform on-the-spot, highly accurate compositional analysis with gas chromatography equipment can reduce operational costs and help companies determine on-the-spot accurate gas levels in a natural gas stream. ...


    By Envent Engineering Ltd

  • Using Spectroscopy for Used Oil Analysis

    Evaluating the wear condition of equipment is a primary requirement of condition monitoring programs. Oil wetted equipment will generate wear particles throughout its lifetime, the nature and rate of the wear varies from initial ...


    By Spectro Scientific

  • Gap Analysis: Evaluating the Readiness to Respond

    Experts Analyze a Major Oil Company’s Preparedness Introduction O’Brien’s is a highly specialized and recognized emergency preparedness and crisis management consulting firm providing environmental, security, risk and regulatory compliance services to a diverse group of industries, as well as public entities such as ports, universities and ...


    By Witt O`Brien`s, LLC.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you