gas analysis instrument Articles

  • Case study - Monitoring the oxygen content in bio-methane-to-grid supply

    Since 1984, Orbital has provided advanced technology solutions for the natural gas industry. Orbital’s customers, including the National Grid and the UK's gas distribution networks, rely on its crucial engineering support and specialised knowledge. Its value-added services and innovative products reduce the time it takes to identify, design and begin cost-effective delivery of new ...


    By Systech Instruments Ltd

  • Monitoring the oxygen content in bio-methane-to-grid supply

    Orbital utilise the EC91 ATEX oxygen analyser from Systech Illinois to accurately monitor the oxygen content in the purified bio-methane gas prior to it being injected into the national grid gas network In September 2010, Orbital installed the gas monitoring and treatment plant on the UK’s very first large-scale bio-methane-to-grid production facility. This site was designed specifically to ...


    By Systech Instruments Ltd

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • Headspace gas analysis video

    Why does headspace gas need to be measured? To check the continuity and quality of the gas supply to the packing machine, the efficiency of the flush/vacuum cycle and the integrity of the pack seal. To optimise gas usage and save costs. To meet customer headspace gas quality standards. ...


    By Systech Instruments Ltd

  • The analysis of carbon dioxide in natural gas

    Abstract The composition of natural gas varies but consists mainly of methane and varying amounts of heavier aliphatic hydrocarbons, nitrogen and carbon dioxide ...

  • Instrumental methods and challenges in quantifying

    Abstract Increased interest in the fate, transport and toxicity of polybrominated diphenyl ethers (PBDEs) over the past few years has led to a variety of studies reporting different methods of analysis for these persistent organic pollutants. Because PBDEs encompass a range of vapor pressures, molecular weights and degrees of bromine substitution, various analytical methods can lead to ...


  • Policy instruments and recent advances of the greenhouse gas regulating framework in shipping

    The development of a global framework for regulating GHG emissions from shipping is one of the most intensively discussed environmental topics in last decade. In general, shipping is considered an environmental friendly mode of transportation due to its energy-efficiency results. In July 2011 came a first mandatory global GHG reduction measure for the shipping industry. However, market-based ...


    By Inderscience Publishers

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Fire and Gas Protection Systems as Part of Safety Instrumented Systems and Risk Management

    Garth Watkins, Director Europe, Middle East, Africa, Detector Electronics Corporation, Presented at HazardEx International Conference 2008 Process-systems operators today face increasing demands for lower costs and higher safety standards in an increasingly regulated environment. In addition, companies desire to provide a working environment that is as safe as possible. As a result, plant owners ...

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Mercury Analysis

    Characteristics of Mercury What is Mercury? Mercury is a naturally occurring silver-colored metallic element noted for its occurrence as a liquid at room temperature and toxic to living organisms. This silvery, opaque liquid metal is very dense, yet has a high surface tension that causes it to form tiny perfect spheres in the pores of the rocks it is found in. It is ...


    By HORIBA Europe GmbH

  • Texas Instruments - A Novel Separation Technique for the Analysis of Trace Levels of Atmospheric Contaminants in Inert Semiconductor Process Gases

    A NOVEL SEPARATION TECHNIQUE FOR THE ANALYSIS OF TRACELEVELS OF ATMOSPHERIC CONTAMINANTS IN INERTSEMICONDUCTOR PROCESS GASES J. Scott McWilliams, Alan Johnson, Charlene Long, Jeremiah D. Hogan*Texas Instruments, Inc.Dallas, TX 75265 Low ppb detection limits for contamination in cylinder gases have been achieved with gas chromatography using a modified gas ...


    By Environics, Inc.

  • 40 years of expertise in gas analysis, definitely something to celebrate

    This year, Chromatotec celebrated its 40 years of expertise in gas analysis; 40 years in the market through the implementation of its dedicated product MEDOR® all around the world. The MEDOR® analyzer has now become the reference instrument in the field of expertise of natural gas in several countries especially in the United States. On July 9, in ...


    By Chromatotec Group

  • Quantitative analysis of automotive exhaust gas by Fourier Transform Infrared spectroscopy

    For monitoring gaseous emissions from muffler, instruments presently used can only measure quantitatively a given pollutant. Fourier Transform Infrared (FTIR) spectroscopy can provide quantitative and online real time analysis. Calibration of our FTIR spectrometer with CO, CO2, NO, NO2 and N2O was done and the limits of quantification obtained were shown to be as low as 80 ppm. The variation ...


    By Inderscience Publishers

  • QIC-Biostream - exhaust gas analysis of small scale fermenters

    Summary The application of the Hiden QIC-Biostream gas analysis system is to monitor the off-gas and vapours from up to 80 small scale fermenters for yield optimisation and process screening. Introduction Biotechnology is an extremely important area for the 21st century and information relating to yield of a product is crucial to most Biotech ...


    By Hiden Analytical

  • Low thermal mass gas chromatography – Analysis at MACH speed

    Gas Chromatography (GC and GC/MS) analysis has been the mainstay for the analysis of regulated organic contaminates in the environmental field. Numerous advancements have occurred in GC instrumentation that include improvements for injectors, detectors, automation, software, and GC column choices. Although many advancements have been made in GC technology, very little has changed for column oven ...


  • Accuracy and precision analysis of chamber-based nitrous oxide gas flux estimates

    Chamber-based estimates of soil-to-atmosphere nitrous oxide (N2O) gas flux tend to underestimate actual emission rates due to inherently nonlinear time series data. In theory, this limitation can be minimized by adjusting measurement conditions to reduce nonlinearity and/or by using flux-calculation (FC) schemes that account for the so-called 'chamber effect.' The current study utilizes gas ...

  • A multi‐attribute decision analysis for decommissioning offshore oil and gas platforms

    The 27 oil and gas platforms off the coast of southern California are reaching the end of their economic lives. Because their decommissioning involves large costs and potential environmental impacts, this became an issue of public controversy. As part of a larger policy analysis conducted for the State of California, we implemented a decision analysis as a software tool (PLATFORM) to clarify ...


    By John Wiley & Sons, Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you