gas analyzer software Articles

  • A Faster and Better FluidScan with Version 5

    Measure water contamination in turbine oils down to 300 ppm The latest version of FluidScan software can detect total water presence as low as 300 ppm in turbine oils.  The method provides an alternative to laboratory tests such as Karl Fischer titration when fast, simple, and reagent-free analysis is needed. In addition to measuring water contamination, the FluidScan ...


    By Spectro Scientific

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • Detection of moisture in ammonia gas

    Problem Statement As technologies advance, so does the request for ultra high purity ammonia. Ultra high purity (UHP) ammonia is used in the semiconductor industries, production of flat panel displays, and a number of other applications. Due to this rising interest in UHP ammonia, manufacturers are having to battle ammonia’s most prominent and damaging impurity--moisture. For ...


    By CIC Photonics, Inc.

  • Natural Gas: Complete Analytical Solution

    Chromatotec® has developed in its Research & Development laboratories, a new instrument for hydrocarbon (C1-C6+) measurements and calorific values as well as WOBBE index computation. This analyzer is based on chromatography principle using a Thermal Conductivity Detector (TCD). The sample will be separated into the column and quantified by the detector. A difference of thermal ...


    By Chromatotec Group

  • NovaGerar landfill gas to energy project

    Overview The objective of the NovaGerar Landfill Gas to Energy Project in Nova Iguaçu - Rio de Janeiro, Brazil is to explore the landfill gas (LFG) collection and utilization activities of the landfills managed by S.A. Paulista. This involves investing in a gas collection system, leachate drainage system and a modular electricity generation plant at each landfill site (with expected ...


    By QED Environmental Systems

  • Cerex introduces the new AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Leak detection in semiconductor fab gas processes

    Problem Statement Often times in semiconductor fabs moisture levels are monitored to ensure that products aren’t damaged by excess moisture in the process. If there are above normal levels of moisture, pinpointing the source of that moisture can be difficult. The moisture could be evolving from impurities in gas tanks or leaks in the sampling lines. One way to avoid downtime ...


    By CIC Photonics, Inc.

  • Canarina DISPER software · air pollution mapping · algorithms 9

      Canarina DISPER software · air pollution mapping   9.1.4 Plume Rise Formulas  The plume height is used in the calculation of the Vertical Term. The distance dependent momentum plume rise equations are used to ...

  • FTIR becomes best option for multi-gas emissions

    Globally, the number of industrial processes and emissions being monitored with Gasmet’s FTIR multi-gas technology has increased enormously in recent years as process managers exploit the benefits of being able to monitor a wide range of gases simultaneously and with minimal maintenance and calibration requirements. Gasmet CEMS (continuous emissions monitoring systems) are used for ...


    By Gasmet Technologies Oy

  • Digital Technology to Transform Oil, Gas Hiring Practices

    The oil and gas industry’s effort to adopt digital technology not only will impact its daily operations, but its hiring needs as well. The oil and gas industry must pursue digital technology for two reasons: an aging workforce and increased focus on safety, said Mike Weast, IT regional vice president with professional staffing firm Addison Group, in a statement to Rigzone. As the majority ...

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Research Institute uses GE InnovOx TOC analyzer to evaluate hydraulic fracturing and oil exploration produced water

    Background The Global Petroleum Research Institute (GPRI) at Texas A&M University-College Station regularly conducts laboratory research studies on various oil and gas produced wastewaters with varying sample matrices. The GPRI tests samples at different shale and oil producing formations using a mobile laboratory, which houses a pilot-scale treatment system for identifying the ...


    By GE Analytical Instruments

  • Case study - N°NG1 – Natural gas monitoring – Medor Exp

    Context & Challenges Natural gas used for household consumption typically contains odorant sulfur components for safety reasons. As natural gas is normally odorless, the sulfur components are artificially added. When natural gas is transported between various companies, regions or countries, gas companies have to verify that the sulfur species are present as specified. ...


    By Chromatotec Group

  • Case study : One of the world’s largest auto manufacturers deploys software to streamline utility bill management

    The Customer General Motors, commonly known as GM, is a multi-national corporation that designs, manufactures, markets, and distributes vehicles and vehicle parts, and sells financial services. For 77 consecutive years, from 1931 to 2007, the Company led the global vehicle sales market, and today, General Motors remains one of the world’s largest automakers. ...


    By EnerNOC, Inc.

  • The World’s Largest Gas to Liquids Facility Runs on Thermo Scientific SampleManager LIMS

    Established by Shell and Qatar Petroleum in 2006, Pearl GTL is the largest gas to liquids facility on the planet. Gas to liquids (GTL) is the conversion of natural gas to liquid fuels and other products, including gasoil, naphtha, kerosene, normal-paraffin and lubricants. Pearl GTL has a capacity of 140,000 barrels per day of these products and 120,000 barrels per day of liquefied petroleum gas, ...

  • New air quality rules challenge oil & natural gas industry

    EPA Administrator signed a suite of proposed new air regulations affecting both the Production/Processing and Transmission/Storage sectors of the oil and natural gas industry. The proposed rules mandate the use of emission controls as well as work practices through two different air regulatory programs – New Source Performance Standards (NSPS) and National Emissions Standards for Hazardous ...


    By Trinity Consultants

  • Inno-badge – an electronic dosimeter badge for continuous recording of a worker`s exposure to Phosgene gas

    Untitled Document Phosgene, also known as Carbonyl Chloride, is a widely used but highly toxic substance. At room temperature Phosgene gas is nearly colourless, and at low concentrations ...


    By Baum Publications Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you