gas burner manufacturer Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Low-Nox Burner retrofit Experiences in Cracking Furnaces at Dow, Terneuzen

    Abstract: Dow Benelux B.V. (Dow) operates three ethylene plants from the Netherlands, all based within its Terneuzen facility. In 2009, Technip Stone & Webster Process Technology (Technip) studied options to reduce the NOx emissions from the cracking furnaces of cracker 1. The results of this study, combined with the experience elsewhere within the Dow Chemical Company, have been used to ...

  • Direct fired thermal oxidizer - Aluminum manufacturer

    Epcon has extensive experience in designing and building Air Pollution Control Systems for the Aluminum Industry. The Problem The company had a direct fired afterburner and a gas fired rotary kiln. The kiln would de-oil the aluminum scrap and the offgas would go to the afterburner. The design of the system was over 20 years old and very fuel ineffficient.   ...


    By Epcon Industrial Systems, LP

  • Monitoring Air/Fuel Mixtures in Glass and Glass Fiber Manufacturing case study

    Measurement of Premix Gas. To produce the desired flame in a glass forehearth or when making fiberglass (glass fiber) insulation, an air/fuel pre-mixer is used. The pre-mixer combines compressed natural gas or propane with air and this mixture is then piped to the process burners At the burner, a fuelrich or fuel-lean flame is produced depending on the air/ fuel ratio selected. In many ...

  • Case study - Automotive manufacturer chooses the QUADRANT SR Thermal Oxidizer

    The worlds largest automotive manufacturer recently installed our QUADRANT SR-Series Thermal Oxidizer for use at destroying CO and VOC emissions from their engine test cell facility. The test facility houses several engine, transmission, and chassis dynamometer’s. The manufacturer demanded a system that would provide the highest uptime reliability and highest performance. The QUADRANT ...

  • Case study - Landfill waste gas abatement

    For over 43 years Catalytic Products International has designed and manufactured specialized oxidation systems for use in controlling process-related VOC emissions. The QUADRANT-NRV Series Thermal Oxidation System is designed for use with the low-volume/high-BTU waste gas stream emitted from many landfill gas purification processes. As we utilize our Venturi Burner Package to process the waste ...

  • Low emission combustion of landfill gas

    Type     HOFGAS®- Efficiency 2000 (3x) Commissioning     July 2002 Site     Ämmäsuo Landfill (Espoo, FI)  SituationÄmmässuo landfill is located in Espoo, about 20 km from Helsinki. The landfill is the largest one in Finland and one of Europe’s largest. In order to reduce the greenhouse gas emissions and eliminate ...


    By Hofstetter BV

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • The design and installation of the gas collection system

    The designer of gas collection plants has the task to fulfill optimally the important criteria: stability of gas quality efficiency of collection economic viability of the plant The stabilisation of the gas quality helps to solve the problem between the uneven gas production of the landfill on the one side and ...


    By Hofstetter BV

  • SOCAVER Thermal Gas Supply - Case Study

    SOCAVER (Société Camerounaise de Verrerie) is a subsidiary of the leading Cameroon brewery, SABC (Société Anonyme des Brasseries du Cameroun). SOCAVER, which is the only glass factory in the Central Africa region, blew its first bottle on 1 July 1970 and today supplies a host of African countries with its products. Specialising in the manufacture of hollow glass, ...


    By Victoria Oil & Gas Plc

  • Fire prevention measures in gas fired boiler’s operation

    Gas fired boiler is a kind of industrial boiler using natural or coal gas as fuel,its fuel is risky,especially,fire leakage in the operation is easy to ...


  • Exhaust Gas Treatment in Paint Shops: Volkswagen chooses catalytic afterburning

    Paint shops are an energy-intensive step in the automotive manufacturing process. One of the world´s largest paint-shop complexes is operated by the Volkswagen Group at its main plant in Wolfsburg. In the past VW used hot air from thermal afterburners to heat its paint dryers. Following a detailed review, the company was one of the first to decide to ...


    By Clariant International Ltd.

  • Tips for turning a coal fired boiler to gas fired boilers

    Smog has been a heated topic among the word. Therefore , gas fired boiler substitute for coal fired boiler become a trend to protect the environment.Since the boiler is a large thermal equipment ,it is requires attention to security incidents in the transformation .Here are some tip from ZG about turning a coal fired boiler to gas fired boiler. First , when turning a coal fired boiler to gas ...

  • Union Papertech Ltd. save 6.8% gas using the Maxsys Fuel Systems

    A large Northwest paper mill has installed Maxsys Fuel System technology saving 6.8% off their energy bill and this has inspired them to place new orders with Maxsys for other applications. Union Papertech located at Simpson Clough, Lancashire, is part of the Purico Group, a 4,500-employee organisation with a global presence. Through its policy of continuous investment in the latest technology, ...


    By Maxsys Fuel Systems Ltd

  • Maxsys Fuel System generates 6% savings on Gas Fired Steam Raising Boilers at Mondi Packaging

    Mondi is one of the world’s leading international paper and packaging groups with a substantial global presence, employing 34,000 people at 112 sites across 34 different countries. The company is continually striving for a consistent high level of improvement in environmental performance in all its operations, making efficient use of raw materials and energy, while focusing on innovation ...


    By Maxsys Fuel Systems Ltd

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • What do a brewery and a wastewater treatment facility have in common? More than you think

    You may think that a brewery and a wastewater treatment facility are about as similar as day and night, hot and cold, old and young. But they have more in common than you think. ABUTEC has worked with both to ensure their waste-to-energy systems function at top capacity. Bell’s Brewery in Kalamazoo, Michigan, needed a way to save money, ensure compliance and practice sustainability. ...


    By ABUTEC LLC

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Soil remediation system - Trailer mounted portable afterburner

    The Problem A major Vapor & Odor Control company needed a portable solution to clean the soil leftover at old fuel stations. portable afterburner The Process Soil Remediation Afterburners & Oxidizers are manufactured to treat soil containing contaminates such as petroleum hydrocarbons, with diesel oil, gasoline, ...


    By Epcon Industrial Systems, LP

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you