gas detection equipment manufacturer Articles

  • Detection of moisture in ammonia gas

    Problem Statement As technologies advance, so does the request for ultra high purity ammonia. Ultra high purity (UHP) ammonia is used in the semiconductor industries, production of flat panel displays, and a number of other applications. Due to this rising interest in UHP ammonia, manufacturers are having to battle ammonia’s most prominent and damaging impurity--moisture. For ...


    By CIC Photonics, Inc.

  • Detecting Hydrogen Gas and Fires: Seeing the Unseen

    Hydrogen usage is growing. The general public sees and reads about hydrogen as an alternative fuel for cars. However, the big use for hydrogen is found in hydrocarbon processing and other important manufacturing processes. Hydrogen is the first element on the periodic table and is an essential element in the manufacturing of many of our everyday products. We must have respect for its explosive ...

  • Chlorine Dioxide gas detection: A comprehensive guide

    Introduction Some years agoago, the bleaching process in the paper industry was changed from using Chlorine (Cl2) as bleaching agent to Chlorine dioxide (ClO2). This was a challenge forThis posed a major challenge to industrial hygienists, as there were no sensors or detectors available that were specific to Chlorine dioxide: There was no sensor technology for gas detectors available that ...

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical ...


    By Gasmet Technologies Oy

  • Additive Manufacturing 3D Printing

    3D printing is officially skyrocketing, with industrial applications in medical, biotech, aerospace, defense, and consumer electronics industries growing daily. At the heart of this acceleration is the additive manufacturing or AM process, which allows for easy printing from computer-aided design templates. As this new technology reaches its tipping point, review what the growth ...

  • Manufacturers face challenges with pharmaceutical impurities

    Pharmaceutical manufacturers may face various challenges when attempting to meet the United States Pharmacopeia (USP) requirements for residual solvents (volatile organic chemicals).Residual solvents in pharmaceuticals are trace level impurities of volatile organic compounds in final products or excipients. In general, residual solvents originate from manufacturing processes related to the ...


  • Continuous Improvement in Automotive Manufacturing: Hendersons Automotive Group

    Cleaner production measures introduced in 1992 by Hendersons Automotive Group have resulted in annual savings of $270,000. The measures cost a total of $309,000, and paid for themselves in only 18 months after implementation. The biggest investment of $235,000 involved the commissioning of a seat slide pre-treatment system, while the others were good housekeeping measures which have helped raise ...


  • Honeywell analytics’ 301W wireless gas detection system delivers safety plus cost savings and energy efficiency at a Canadian ice arena.

    The Situation: Mount Boucherie Multiplex is a 2800-seat ice arena/concert hall/multi-purpose entertainment venue in Westbank, British Columbia. Owned and managed by the Regional District of Central Okanagan, the Multiplex is an architectural centerpiece of the community, and home to the Westside Warriors pro hockey team. At Multiplex, city construction codes required the installation of ...


    By Honeywell Analytics, Inc.

  • Fugitive Gas Emissions In The Petroleum & Natural Gas Industry

    Challenge: Fugitive emissions in the petroleum and natural gas industry can come from a variety of sources and are classified as intentional (venting from tanks, compressor vents and stacks) or unintentional (equipment wear and tear, improper assembly, damage or manufacturing defects).  Most of these fugitive gas leaks are considered insignificant or  too small to ...


    By Leak Imaging, LLC

  • Additive Manufacturing 3D Printing: The Growth Progress and Need for Safety Monitors

    Additive Manufacturing 3D Printing: The Growth Progress and Need for Safety Monitors 3D printing is officially skyrocketing, with industrial applications in medical, biotech, aerospace, defense, and consumer electronics industries growing daily. At the heart of this acceleration is the additive manufacturing or AM process, which allows for easy printing from computer-aided ...

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Field Detection of Chlorinated Alkenes in Well Water using the FROG-4000 Portable GC - Case Study

    Introduction Defiant’s FROG 4000, a portable GCPID system, was used to identify and determine the concentration of chlorinated alkenes in several extraction wells located in Tacoma Washington. Split samples were taken at each well and sent to an offsite lab for analysis. This case study examines the field exercise and highlights the high degree of agreement between the offsite lab and ...


    By Northern ANI Solutions Ltd.

  • Establishment of the encoded photometric (ep-ir) spectrometer’s ability to detect the lowest possible level of moisture

    Problem Statement The race for a system that can detect the lowest possible level of moisture is seemingly everlasting. As the race continues we have begun to explore the options of using an EP-IR spectrometer coupled with DID Photonics Integrated IR Source 4 Runner. Experimental Equipment The EP-IR spectrometer is vibration insensitive and runs ...


    By CIC Photonics, Inc.

  • Benefits of HART Communication-Enabled Gas and Flame Detectors

    Catastrophic results can occur when a fire or a flammable/toxic gas release goes undetected in any petrochemical facility. For early warning and prompt hazard mitigation, flame detectors and gas detectors are essential tools. Clear, usable, diagnostic information from these detection instruments is extremely valuable in ensuring the devices are properly maintained, tested, and poised to protect ...

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Follow toxic gas standards for a smoother project

    Toxic gases, such as Hydrogen Sulfide and Sulfur Dioxide, can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. The United States Occupational Safety and Health Administration (OSHA) and other authorities take detection of these gases very seriously. The American National Standards Institute/ American Petroleum Institute (ANSI/API) and ISA industry standards ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Identifying Leaks from Natural Gas Pipelines at a Safe Distance

    The use of natural gas, of which methane is the principle component, is increasing worldwide. According to the American Petroleum Institute methane meets 24% of U.S. energy demand and heats over 50% of all U.S. households. It also has many industrial uses, such as the manufacture of chemicals like ammonia, methanol, butane, ethane, propane and acetic acid; it is also an ingredient in products as ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you