gas engine Articles

  • Hurricane MK cyclone system for PM emission reduction on a 2.5MWth biomass boiler at Britton Timbers. (8 760m3/h at 328°C) - Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System type MK for particulate matter reduction from the flue gas of a biomass boiler in Australia. The boiler was installed at Britton Timbers, a diversified company with interests in timber harvesting, sawmilling, international timber import and export, and distribution. From humble ...

  • Taking Control of Gas Engine Issues

    In an effort to gain maximum engine performance and stay within the local exhaust emission limits over a wide range of engine load and ambient conditions, operators at the County Sanitation Districts of Los Angeles County’s Joint Water Pollution Control Plant wastewater treatment plant near downtown Los Angeles have installed Continental Controls Corp. ECV5 ...

  • Emissions Test Report - Gas Compressor Engines

    INTRODUCTION In 2004, Northeast Texas Air Care (NETAC) commissioned a pilot project to demonstrate the effectiveness of available ...


    By DCL International Inc.

  • Microturbines, Gas Engines Link Biogas to the Grid

    OPPORTUNITIES to produce electricity from methane are being improved continuously as manufacturers introduce new and upgraded equipment to address market needs and varying characteristics of raw biogas. In the renewable energy from organics recycling arena, the two primary types of electricity generation equipment are microturbines and reciprocating gas engines. This article provides a brief ...


    By BioCycle Magazine

  • Development of Pre-Turbo Catalyst for Natural Gas Engines

    Distributed power generation is an efficient method for reducing CO2 emissions through the elimination of transmission losses. Co-generation has similar benefits with higher thermal efficiency. Natural gas engines are very popular for these applications. Unfortunately, these engines emit significant levels of methane, ...


    By DCL International Inc.

  • GA3000 verifies gas quality for Austrian gas engines case study

    Application Anaerobic digestion of household & garden waste Equipment GA3000 Location Salzburg, Austria Customer SAB Wastage Removal Requirement The customer needed to monitor the biogas being produced during the AD process before it is sent to gas ...


    By Geotech

  • Technical and economic analysis of gas-engine driven heat pump in China

    In this paper, the primary energy ratio and economic benefit of five different heating systems are analysed. The results show that the gas-engine heat pump system has the advantages of high primary energy efficiency and favours environmental protection in contrast to the other four heating systems. At the same time, to improve the economic benefit of the energy saving and environmental protection ...


    By Inderscience Publishers

  • Can a gas engine use diesel fuel with less pollution?

    Anyone concerned with rising oil prices and pollution from fossil fuel might like to know about a new technology, which addresses both problems. Its application will put an end to the days of sooty smoke seen from accelerating diesel trucks and buses. The ...


  • VIYELLATEX improves factory efficiency thanks to cogeneration with gas engines

    VIYELLATEX Limited is the composite knit apparel and textile manufacturing business unit of VIYELLATEX group. It started its operations in 1996. The company is comprised of design and product development, sample, knitting, washing, cutting, sewing and finishing sections. The Textile Testing Corporation (Testing Lab) is also a part of VIYELLATEX. It caters to major buyers such as Puma, S.Oliver, ...


    By Clarke Energy

  • Generation using gas-fuelled engines in South Africa – an overview

    Most gas engines are Otto cycle spark ignition internal combustion reciprocating engines using natural gas as the primary fuel. Smaller models utilise stochiometric combustion while the larger engines are lean burn engines with pre-chamber ignition systems. The engines are coupled with packaged generator sets, ...


    By Clarke Energy

  • Thermodynamic analysis of a hybrid gas turbine/thermoacoustic heat pump/refrigeration engine

    Possible performance enhancement of small gas turbine power plants through the application of thermoacoustic systems is examined. The thermoacoustic subsystem is powered only by the waste heat of the gas turbine. Two different gas turbine configurations are considered: a Thermoacoustic refrigerator assisted gas turbine (TRG) and a Combined thermoacoustic heat pump and refrigeration assisted gas ...


    By Inderscience Publishers

  • Gas Engineers Will Require CPA1 From 1st April 2012

    Gas Engineers Will Require CPA1 From 1st April 2012 Why do I need this? The Gas Safe Register announced a year ago that all registered gas engineers who have or due to gain ACS modules CEN1 or HTR1 now require the flue gas analyser qualification CPA1. From April 2012, gas engineers who do not hold the CPA1 will have their CEN1 and/or HTR1 suspended. ...


    By Shawcity Limited

  • Forensic engineering applied to the analysis of a gas explosion in a residential building

    Present paper deals with the identification of the cause of an explosion in a hollow space positioned below a residential building as the result of welding operations. On field investigation clearly demonstrated that the explosion was due to the ignition of a flammable atmosphere in the basement of the building. Along the trial two hypotheses were brought to the judge: (a) explosion of an ...


    By Inderscience Publishers

  • Laser Engineering // The Valuable Technology

    In this seminar we will introduce the Laser engineering as the valuable and modern technology, which can be implemented within the various commercial fields: such as the civil, mechanical, gas & petroleum, chemical, communication, weather inspector, and arms as well as for the arts and medical treatments. The Laser promotion was due to its high velocity, accuracy of sub-micron space, and fine ...


  • Engine detonation with bioethanol cavitation

    Bioethanol is an alcohol of an organic origin which receives from a sugar ferment reaction. In the process of ethanol formation, starch from grains of plants turns in simple sugar in reaction with enzymes. Natural sugar ferments with yeast and form a mix of alcohol, water and unfermented remains. Alcohol is separated from a mix in distillation capacities and additionally clears in rectifying ...


    By GlobeCore GmbH

  • Engine detonation with bioethanol cavitation

    Bioethanol is an alcohol of an organic origin which receives from a sugar ferment reaction. In the process of ethanol formation, starch from grains of plants turns in simple sugar in reaction with enzymes. Natural sugar ferments with yeast and form a mix of alcohol, water and unfermented remains. Alcohol is separated from a mix in distillation capacities and additionally clears in rectifying ...


    By GlobeCore GmbH

  • Impact of ambient air temperature and injection timing on reduction of engine out emissions of DI diesel engine operating under the influence of oxygen enriched hydrogen gas

    The present experimental work is a study of the impact of ambient air temperature and the injection timing of diesel fuel on reduction of engine–out emissions of DI diesel engine, operating under the influence of oxygen enriched hydrogen gas. Here the oxygen enriched hydrogen gas was produced by the process of water electrolysis. The produced gas was aspirated into the combustion process of ...


    By Inderscience Publishers

  • Power generation at a stationary engine application

    South Texas, USA Max Gross Power Output: 28kWe Thermal Heat Input: 235 - 450kWt Hot Water Input Range: 180 - 190°F Hot Water Flow: 200 GPM Direct Condenser: Ambient air temperature ranges from 30-100°F avg is 70°F ElectraTherm’s Gulf Coast distributor, Gulf Coast Green Energy (GCGE), is generating fuel-free, emission free power using the ElectraTherm ...


    By ElectraTherm

  • Ethylene Plant Treatment Hydrocarbon Engineering

    Ethylene is the most commonly produced petrochemical product. The bulk of annual commercial ethylene production is based on thermal cracking of hydrocarbon feedstocks with steam. Usual raw materials for pyrolysis are refinery gas, liquid petroleum gas (LPG), natural gas liquids (NGL), naphtha or gas oil. The production of ethylene is a very complex process, including cracking, cooling, ...


    By Kurita

  • New engines: Time to clear the air

    In response to new federal emission standards that went into effect Jan. 1, 2010 in the U.S. and Canada, engine manufacturers selected one of two choices to achieve a reduction in emissions of oxides of nitrogen (NOx). They either provide an in-cylinder approach through increased exhaust gas recirculation (EGR) only, or an engine aftertreatment approach using selective catalytic reduction (SCR) ...


    By Waste Advantage Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you