gas flow meter Articles

  • Smart meters: Truly a cure for energy blindness?

    And now for a dose of reality.   No doubt smart meters are a good thing, but even their most ardent fans must admit that a degree of hoopla surrounds these little digital boxes. We hear that if consumers can just see how much power they use in real time, and what it costs, our energy woes will be no more.   Smart meters will even cure the blind. The energy blind that ...

  • Applications guide to mass flow measurement in the pharmaceutical and biotech industries

    Pharmaceutical and biorech companies can fine-tune costs, quality, and emissions if they are equipped with more effective measurement sys- tems. Sierra mass flow meters and controllers provide precise measure- ment and control designed for process industries. They can make any plant more cost-effective in the following ways: Controlling Gas Flow To Fermenters The flow of gases to ...


    By Sierra Instruments, Inc.

  • Providing Precision Flow Control Solutions for Critical Biomolecular Research

    When scientists at the University of Nottingham’s Centre for Biomolecular Sciences (CBS) in the United Kingdom needed instrumentation to control the flow of gases in their research, they turned to Litre Meter, a UK distributor for Sierra Instruments, and the SmartTrak 100 series mass flow meters and ...


    By Sierra Instruments, Inc.

  • Two Technologies for Flow Measurement from Outside a Pipe

    Doppler and Transit Time are two very popular types of flow meter for non-invasive measurement of flow in full pipes. We tend to confuse these technologies because they are both ultrasonic and both measure flow by using sensors clamped onto the outside of a pipe. In the real world they actually work best in opposite applications. Success in your installation depends on understanding the ...


    By Greyline Instruments Inc.

  • New Video: Master Your Mass Flow Control Challenges

    For over 40 years, Sierra has pioneered the development of precision gas mass flow controllers. Today, our high-performance SmartTrak lineup, with over 100,000 successful installations, proves we’ve never let up. For Lab Researchers and  ...


    By Sierra Instruments, Inc.

  • Gas Dilution With The Equal Capillaries Technique

    The advantages of the equal capillaries technique are surprising and leads to reach accuracy values of one order of magnitude higher than all the other dynamic dilution techniques. This comparison will be supported by analyzing the accuracy available with two different techniques. Nozzles (sonic or non-sonic) technique With this technique, a series of different size nozzles is used ...


    By Be.T.A. Strumentazione Srl

  • Innovative flow control technology supports Australia’s programme for clean LNG

    Sector: Oil & Gas Category: Electric Actuators, Fluid Power Actuators, Control Networks, Services Products: CVA, IQ3 Standard, Skilmatic, EH, GO, CP, GP, HART Rotork flow control products have been selected for applications throughout the giant Queensland coal seam gas-to-LNG (Liquefied Natural Gas) projects in Australia. To date, ...


    By Rotork plc

  • Sizing and Selecting the Proper Metering Pump: Part 1 of 2

    A typical agriculture or process application can consume large amounts of chemicals during daily operations. While the volumes may be large, though, they must also be very precise, with exact amounts delivered according to strict injection schedules. The pressures—from very high to very low—that the chemicals are injected at must also be governed precisely. This demand for ...


    By Modern Pumping Today

  • How to Supercharge the SmartTrak Mass Flow Controller with Compod

    Streamline, simplify and save time and money by plugging the innovative Compod upgrade into the face of any SmartTrak 100 mass flow meter or controller. SmartTrak is not only a true multi-gas digital mass flow controller, it can control your process too. ...


    By Sierra Instruments, Inc.

  • Leak detection in semiconductor fab gas processes

    Problem Statement Often times in semiconductor fabs moisture levels are monitored to ensure that products aren’t damaged by excess moisture in the process. If there are above normal levels of moisture, pinpointing the source of that moisture can be difficult. The moisture could be evolving from impurities in gas tanks or leaks in the sampling lines. One way to avoid downtime ...


    By CIC Photonics, Inc.

  • Oil refinery vapour gas case study

    1.0 Evaluation of Refinery Gases Various refinery gases are generated in the process of oil refining. These vary, depending upon the type of crude oil being distilled, such as Reduced Crude distillation, or Naphtha cracker. For the purposes of this case study the description and range of refinery gases are those gases produced from refining Crude Oil and Reduced Crude only. Crude ...

  • The application of radiation sources in the oil and gas industry and shortages in their services

    Oil and gas industries utilise many radiation sources in various applied radiation-based technologies. Those technologies provide significant benefit to the daily operations of the industry. Gamma emitting sources of Cs-137, Co-60, Ba-133, Am-241 are used in oil and gas well logging, in Multiphase Flow Meter (MPFM) technology at oil and gas production facilities and in transmitted level gauges ...


    By Inderscience Publishers

  • Dosing and mixing of powdered activated carbon for flue gas applications

    Subject: Powdered activated carbon (PAC) is dosed in dry powder form into flue gas for the removal of dioxins, furanes, mercury and other heavy metals from flue gases. Gericke supplies complete solutions for the handling of bulk solids. These complete installations are characterized by their clean, accurate, trouble- and dustfree operation. Application: Furnaces, incinerators, sinter ...


    By Gericke

  • IRGAS XFlo: process gas FTIR system for flange mounted applications

    Introduction When doing process tool or exhaust abatement tool installations, it is desirable to monitor the exhaust gases as a means of controlling or setting up the tool 1, 2. FTIR, with its rapid analysis speed, high sensitivity, and ease of use, offers one means of monitoring such systems at the time of installation and during the working life of the tool. Often, these applications ...


    By CIC Photonics, Inc.

  • Use of anaerobic respirometers for measuring gas production in toxicity and treatability tests

    Introduction Anaerobic processes are used widely for stabilizing domestic sludges, treating industrial wastes, and converting biomass to methane. These processes frequently receive complex organic chemicals that are classified as being hazardous or toxic. Despite advances in our understanding of anaerobic reactions, there is limited information regarding the impact of toxic chemicals on the ...


    By Challenge Technology

  • Case study - N°NG1 – Natural gas monitoring – Medor Exp

    Context & Challenges Natural gas used for household consumption typically contains odorant sulfur components for safety reasons. As natural gas is normally odorless, the sulfur components are artificially added. When natural gas is transported between various companies, regions or countries, gas companies have to verify that the sulfur species are present as specified. ...


    By Chromatotec Group

  • Process analytics throughout the entire natural gas pipeline supply chain – Case Study

    Natural Gas (NG) Natural Gas is a vital component of the world's supply of energy. It is one of the cleanest, safest, and most useful of all energy sources. Unlike other fossil fuels, natural gas is clean burning and emits lower levels of potentially harmful by products into the air. While natural gas is formed primarily of methane, it can also include smaller amounts of higher ...

  • What do oil sands and shale gas have in common? Acute need for sustainable water management solutions

    The world’s appetite for fossil fuels is not abating anytime soon, and the alternatives fall short. Nuclear energy makes people uneasy, coal is perceived as not being that clean, hydroelectric requires massive capital outlays, solar is still improving and the wind just doesn’t always blow. For the foreseeable future, North Americans have embraced the idea that expanded production of ...


    By Biolargo, Inc.

  • Controlling the addition of Chlorine into a Process

    There are several methods for controlling the addition of chlorine into a process. These methods include flow proportional injection, ORP (oxidation reduction potential) or a residual chlorine analyzer. Each method measures a different process characteristic. Depending on the specific type of process being controlled, there generally is a best choice for controlling the injection of either ...


    By Walchem, Iwaki America Inc.

  • TransCanada Pipelines - Alberta, Canada

    Service: SmartBall - Gas Leak Detection Client: TransCanada Pipelines Project Date: 2010 Type of Pipeline: Natural Gas Diameter: 16-inch Pipe Material: Steel Length: 68.9 KM Flow Rate: 3 meters/second Pure Technologies completed a demonstration inspection of a portion of the Grande Prairie Mainline gas transmission ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you