gas flow monitoring Articles

  • Green House Gas Flow Monitoring

    This article addresses the challenges and solutions to flow measurement of green house gases in various industry applications.  GHG flow monitoring regulations are discussed and addressed. Last year the EPA implemented new regulations entitled “Mandatory Reporting of Greenhouse Gases.” The new regulations called for certain facilities emitting 25,000 metric tons or more per year ...

  • Gas Detection and Monitoring Systems

    In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...


    By Edinburgh Instruments Ltd

  • DFM 5.0 doppler flow meter for frac sand slurry flow monitoring - Case Study

    CanFrac Sands Ltd. of Lloydmister Saskatchewan (Canada) needed a flowmeter that could accurately measure sand slurry flow without being damaged by this highly abrasive product. They selected the Greyline DFM 5.0 Doppler Flow Meter with a clamp-on ultrasonic sensor mounted on the outside of a pipe. CanFrac produce “fracturing sand” used by the oil and gas industry. This special type of ...


    By Greyline Instruments Inc.

  • Measuring and interpreting gas flow from landfill boreholes case study

    Current landfill gas measurement practice for measuring the gas composition is well understood, and there are standard procedures and instruments available to analyse the gas. It is also current recognised practice to measure the gas 'flow' from boreholes to monitor the production of gas in a landfill site. If care is taken to make the measurement in the same way each time, changes in the ...

  • Case study - N°NG1 – Natural gas monitoring – Medor Exp

    Context & Challenges Natural gas used for household consumption typically contains odorant sulfur components for safety reasons. As natural gas is normally odorless, the sulfur components are artificially added. When natural gas is transported between various companies, regions or countries, gas companies have to verify that the sulfur species are present as specified. ...


    By Chromatotec Group

  • Wet weather flow management

    For years, population explosion, demographic shifts, urbanization, aging infrastructure, limited water resources, and economic development have driven our water market, and with that our world’s need for total water solutions. ...


    By CH2M Hill Companies, Ltd.

  • PureAire Combines Oxygen and CO2 Sensors to provide a Dual Gas Monitor to the Marketplace

    As a recognized leader in O2 safety monitoring, PureAire recently explored the need for an O2 monitor where carbon dioxide is used. There are four key cryogenic gases; nitrogen, helium, argon, and carbon dioxide (CO2), which can create an oxygen deficient atmosphere. Material Safety Data Sheets (MSDS) covering cryogenic gases cite that a cryogenic leak can create an unsafe ...

  • Area Monitoring: Diffusion Sampling

    Indoor and outdoor gas hazards that exist in open areas are usually monitored using diffusion-type sensors. A diffusion sensor has no active sample-drawing system; diffusion sensors rely on the ambient air movement and pressure to deliver the sample to the sensing element. Diffusion-type sensors are a reliable and cost-effective way to monitor open area gas hazards. When installing diffusion ...

  • Groundwater: Low-flow Purging and Sampling

    Significant timesavings, improved sample process integrity, quality assurance and minimal quantities of potentially contaminated purge water to manage - are attractive as the focus on groundwater quality sharpens and economics demand best cost-benefit based methods Water has become a vitally important resource.  Maintaining its quality and quantity and avoiding pollution are set to be ...

  • The Need to Clearly State the Reference Temperature and Pressure Conditions when Reporting Gas Volumes or Volumetric Flow Rates

    In the physical sciences, such as chemistry, the standard temperature and pressure (STP) is a set of conditions for experimental measurements that enables true comparisons between sets of data representing gas volumes. There are many different definitions of standard temperatures and pressures applicable to gas volumes and volumetric flow rates. The differences depend on the organization defining ...


    By F&J SPECIALTY PRODUCTS, INC.

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Applications guide to mass flow measurement in the petroleum industry

    The measurement and control of gas flows in production, refinery, and R&D operations has a direct effect on efficiency, costs, safety, and environmental standards. Sierra mass flow meters and controllers pro- vide direct, fast-response measurement at all levels, to make any opera- tion more effective. Here is a brief summary of the advantages they offer the industry. Direct, Wide-Range ...


    By Sierra Instruments, Inc.

  • Gas Analyser Unit

    Gas Analysers are used in several industries, chemical industries in particualr use gas analysers to monitor their gas emission levels, air quality samples are compared to high purity reference gases to analyse and measure the emissions.  A common practice is to “calibrate” the sample air against clean, dry pure reference gases such as H2, He, Ar, or N2. The ...


    By Fike UK

  • Real-time O2 monitoring in VCM plants using the In-situ laser gas analyzer – Case Study

    Vinyl Chloride Monomer (VCM) Vinyl Chloride Monomer is a colorless, flammable gas. It is of very great importance as feedstock in the production of polyvinyl chloride (PVC), one of the world´s most versatile thermoplastics. Originally, acetylene has been used as feedstock for VCM production but was replaced stepwise by the inexpensive ethylene. Complete changeover to almost ...

  • NH3 Slip Monitoring in Fluidized-bed Catalytic Cracking Using the LDS 6 Gas Analyzer – Case Study

    Fluidized catalytic cracking (FCC) units are used in refineries to convert low value heavy oils into more valuable lighter compounds. Cracking units are sources of emissions of pollutants (e.g. NOx) and must comply with concentration permits set by local or federal authorithies. Modern technologies are applied to reduce the content of pollutants and to monitor certain gas compounds (here: NH3) in ...

  • Measuring of landfill gas production

    Type     HOFGAS®- Smarty S  Commissioning     2002 Site     Nurmijärvi (FI) Situation An accurate estimation of the landfill gas production will support the operator at the Nurmijärvi landfill site in planning the final gas collection and degassing system. A mobile degassing plant was installed to measure the quantity ...


    By Hofstetter BV

  • Paint booths, or areas using combustible gases: why a requirement for combustible gas monitor might be necessary

    Paint booths save time and ensure a smooth and professional application of paint in a range of industries, including automotive, aerospace, home decor, furniture, and more. Combustible gases and fluids in the paint booth environment can pose a health hazard if something goes wrong. Explore the hidden dangers of paint booth fluids and gases, and learn how a ...

  • Detection of moisture in ammonia gas

    Problem Statement As technologies advance, so does the request for ultra high purity ammonia. Ultra high purity (UHP) ammonia is used in the semiconductor industries, production of flat panel displays, and a number of other applications. Due to this rising interest in UHP ammonia, manufacturers are having to battle ammonia’s most prominent and damaging impurity--moisture. For ...


    By CIC Photonics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you