gas monitoring equipment Articles

  • Development of on-line and field dual TD GC – MS for automatic VOC monitoring on petrochemical sites

    Ambient air is polluted by many semi-Volatile and Volatile Organic Compounds (SVOCs and VOCs) coming from anthropogenic and natural sources. VOCs from PAMS, TO14 and TO15 lists can be measured in many ranges of concentration, from pg/m3 up to mg/m3 depending on the location of the measurements. Due to the large number of molecules, the complete separation of all compounds is difficult to perform ...


    By Chromatotec Group

  • Planning for a Gas Monitoring System

    Do you need a gas monitoring system? Then you already know which gases you want to monitor, you probably have an idea of measurement ranges and accuracy requirements, and perhaps you have a budget for the system. But which other aspects have to be considered, and how do you actually design the system? Whether it is about air quality monitoring, continuous emissions monitoring or process control, ...


    By Opsis AB

  • Planning for a Gas Monitoring System

    Do you need a gas monitoring system? Then you already know which gases you want to monitor, you probably have an idea of measurement ranges and accuracy requirements, and perhaps you have a budget for the system. But which other aspects have to be considered, and how do you actually design the system? ...


    By Opsis AB

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

  • Monitoring Multiple Gas Hazards in Ice Arenas

    The equipment used in an arena such as an ice re-surfacer, ice edger, floor sweepers, lift trucks and other special equipment are more often powered by fuel than electricity. The exhaust produced by the gas, propane or diesel fuel powered machines emits, into the air, carbon monoxide (CO), nitrogen dioxide (NO2) and particulates. Ammonia (NH3) is commonly used in the ice chiller mechanical room ...

  • A Two Channel Gas Detector for Monitoring Hazardous Gases in the Workplace

    The potential for exposure to hazardous gases is a concern in many workplace environments. To ensure the safety of the workers, equipment, and the facility, areas presenting a gas hazard should be monitored by gas detectors. Commercial buildings that share a warehouse with manufacturing and/or service work in the back and offices in the front are a prime place for harmful gases and vapours ...

  • Monitoring gas mixtures in weld overlay cladding production - Case Study

    Arc Energy utilise the 542 binary gas analyser to monitor the mixture of gases in their weld overlay process. Arc Energy Resources was started by European Welding Engineer, Alan Robinson in 1994. Since then they have become a worldwide contractor of weld overlay clad products and services. Arc Energy’s weld overlay cladding provides heavy duty protection against corrosion and ...


    By Systech Instruments Ltd

  • Continuous monitoring of BTEX and PAH using automatic thermal desorption-gas chromatography

    Polycyclic Aromatic Hydrocarbons (PAHs) are a group of over 100 different chemicals that are known to be formed typically during incomplete combustion of organic matter at high temperature. Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. Due to their carcinogenic/mutagenic effects, 16 PAHs are currently ...


    By Chromatotec Group

  • Continuous Monitoring of BTEX and PAH using Automatic Thermal Desorption-Gas Chromatography

    Polycyclic Aromatic Hydrocarbons (PAHs) are a group of over 100 different chemicals that are known to be formed typically during incomplete combustion of organic matter at high temperature. Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. Due to their carcinogenic/mutagenic effects, 16 PAHs are currently ...


    By Chromatotec Group

  • An Assessment of the Impact that Gas Monitoring Practices Can Have on “Cost of Ownership” and “Return on Investment”

    Consideration and discussion are devoted to the notion that “gas monitoring instrumentation should be treated just like any other piece of lifesaving equipment…”1.  This is especially true for the semiconductor, photovoltaic, and gas manufacturing industries, where even the tiniest of impurities can wreck economical havoc on a plant, including loss of product, ...


    By CIC Photonics, Inc.

  • Continuous monitoring of polycyclic aromatic hydrocarbons using automatic thermal desorpition-gas chromatography

    Polycyclic Aromatic Hydrocarbons (PAHs) are a group of over 100 different chemicals that are known to be formed typically during incomplete combustion of organic matter at high temperature. Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. Due to their carcinogenic/mutagenic effects. 16 PAHs are currently ...


    By Chromatotec Group

  • Air Quality Monitoring

    Why monitor air quality? Well, to monitor is to know. Everything else is just more or less qualified guesses. International, national and local air quality targets and limits are also tied to monitoring results. What is Air Quality? How is air quality ...


    By Opsis AB

  • Air Quality Monitoring

    Why monitor air quality? Well, to monitor is to know. Everything else is just more or less qualified guesses. International, national and local air quality targets and limits are also tied to monitoring results What is Air Quality? How is air quality characterised? It is quite common to find air quality indexes, where the ranges are divided in sections indicating ...


    By Opsis AB

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Warehouse Optimization: Balancing Equipment Performance and Worker Safety Through Emissions Measurements and Air Quality Monitoring

    Successful warehouse functionality is dependent on both maximizing equipment performance and providing a safe and healthy environment for workers that encourages productivity. However, these two factors are often at odds with each other as warehouse equipment such as forklifts, burnishers and delivery trucks emit toxic gases that can have the potential to create poor indoor air quality which ...

  • Dispense Gas Safety

    What Is Dispense Gas? Inert gases such as carbon dioxide and nitrogen are used regularly within the hospitality industry. These gases, known collectively as ‘dispense gas’, are used to carbonate drinks so ...


    By Analox Sensor Technology

  • Learn How to Implement a More Effective Emissions Monitoring Strategy with Our Application Note, “The Art of Emissions Monitoring and Sampling: Maintaining Gas Integrity”

    Over the past 15 years, all of us here at E Instruments have used our expertise to design, manufacture, and distribute quality emissions monitoring equipment, air quality monitors, and many other products to clients all over the world. Aside from creating many high-quality and reliable instrumentation solutions, something else we've always ...

  • How Accurate is Your Monitor?

    When you consider the many regulations and guidelines that health and safety officers and first responders are faced with, it is amazing they maintain the ability to detect such a wide variety of hazardous pollutants and toxic agents.  There is no lack of regulations governing how to monitor chemical compounds, and the list grows longer all the time.  New standards for portable gas ...

  • Gas Distributors and Specialty Gas Suppliers are the Key to Technology Companies

    The technologies that power laptops, smartphones, LED televisions, and other technologies rely on one hidden ingredient: Gas. Compressed and inert gases help create a pure environment, control the temperature, and carry other substances for a high-quality end product. See how the different gases used play a pivotal role in technology product development and also how they introduce health and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you