gas point analyzer Articles

  • Analytical Devices for the Measurement of Water Vapor and Hydrocarbon Dew-Point in Natural Gas

    Introduction The determination of water vapor (water dew point) is crucial in the processing, custody transfer and transport of natural gas. High levels of water vapor in a natural gas stream can lead to a number of problems which include the formation of hydrates and the contribution to corrosion of plant and equipment. Furthermore, water vapor present in natural gas streams affects the ...

  • Field verification of on-line hydrocarbon dew point measurements

    Introduction The Michell Condumax II applies a fundamental measurement principle for direct measurement of hydrocarbon dew point. Measurement performance is assured through comprehensive factory test and calibration, to verify that each analyzer offers accurate determination of the temperature at which hydrocarbon condensate forms. Further extensive examination confirms highly sensitive ...


  • Point Thomson third-party EIS case study

    ExxonMobil North Slope, Alaska, USA Development of the Point Thomson natural gas and hydrocarbon extraction and shipping facility presents a number of complex challenges. The area is estimated to hold 8 trillion cubic feet of gas—about 25 percent of the North Slope's proven gas resource—and about 200 million barrels of condensate. On behalf of ...


  • FTIR gas analyzers support management of fire at UK waste facility

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents.  Arrangements have been made in England to bring together experts from the Environment ...


    By Gasmet Technologies Oy

  • Analyzing for Trace CO and CO2 using a Total Hydrocarbon Analyzer

    Untitled Document The purity of Specialty Gases is determined by the measurement of various contaminants including Total Hydrocarbons. Low level measurements of carbon ...


    By MOCON, Inc. - Baseline

  • Analyzing the lifecycle of beer case study

    Challenge: A global brewing company requested Antea Group's Global Corporate Consultancy assess greenhouse gas (GHG) emissions that result from the complete life cycle of beer and how the most common package types contribute to the "carbon footprint" of its products. The analysis was to be conducted in the context of the entire product value chain, from materials extraction and agriculture ...


    By Antea Group - USA

  • Praxair Selects Baseline-MOCON’s New BevAlert Gas Analyzer To Improve Detection Sensitivity Of CO2 Impurities

    Lyons, CO — Praxair, Inc. has upgraded its carbon dioxide (CO2) gas analysis with the installation of multiple BevAlert™ Model 8900 at its plants across North America and select international locations.The BevAlert Model 8900 new gas chromatograph, from Baseline-MOCON, Inc., a subsidiary of MOCON monitors trace impurities in CO2 (and other gases) while setting new standards for analytical ...


    By MOCON, Inc. - Baseline

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • Online Analyzers Improve Control of Chloramination Processes in Milwaukee

    The Milwaukee Water Works is a national leader in providing high quality drinking water and monitoring water quality. Since 1998, it has invested $227 million in its infrastructure, from treatment plants to distribution systems, to ensure high quality drinking water and reliable supply. The Milwaukee Water Works treats Lake Michigan water with Ozone gas as a primary disinfectant because it ...

  • Portable lead analyzer to locate source of lead

    OBJECTIVE: To investigate the sources of lead in the environment in children with elevated blood, with the help of a Field Portable X-Ray ...

  • Assist Gas Measurement in Flare Stacks

    The Customer The company manufactures solvents, polymers and intermediary chemicals. These products are sold worldwide and are used in the production of automobile interiors, steering wheels, paints, tires, adhesives, furniture, cosmetics and many other consumer and industrial products. The Process The Company’s site is large, thousands of acres, ...

  • Carbon dioxide gas case study

    Application Moisture] is measured in carbon dioxide gas pipelines and processing plants. Problem The presence of moisture in carbon dioxide gas promotes corrosion. Perhaps more significant is the fact that moisture will readily form ice when pressure is reduced. The ice can readily freeze up pressure regulators, valves, and orifice plates causing a loss of flow and even ice ...

  • NovaGerar landfill gas to energy project

    Overview The objective of the NovaGerar Landfill Gas to Energy Project in Nova Iguaçu - Rio de Janeiro, Brazil is to explore the landfill gas (LFG) collection and utilization activities of the landfills managed by S.A. Paulista. This involves investing in a gas collection system, leachate drainage system and a modular electricity generation plant at each landfill site (with expected ...


    By LANDTEC

  • Cerex introduces the new AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • Gas Dilution With The Equal Capillaries Technique

    The advantages of the equal capillaries technique are surprising and leads to reach accuracy values of one order of magnitude higher than all the other dynamic dilution techniques. This comparison will be supported by analyzing the accuracy available with two different techniques. Nozzles (sonic or non-sonic) technique With this technique, a series of different size nozzles is used ...


    By Be.T.A. Strumentazione Srl

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Digital Technology to Transform Oil, Gas Hiring Practices

    The oil and gas industry’s effort to adopt digital technology not only will impact its daily operations, but its hiring needs as well. The oil and gas industry must pursue digital technology for two reasons: an aging workforce and increased focus on safety, said Mike Weast, IT regional vice president with professional staffing firm Addison Group, in a statement to Rigzone. As the majority ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you