gas sampling pump Articles

  • Train derailment prompts contaminated land investigation - Case study

    On March 30th 2015 a long freight train, transporting a variety of goods including lumber and chemicals, wound its way through the state of Mississippi. At around 5pm, part of the train failed to negotiate a curved portion of the track in a rural area near Minter City, resulting in the derailment of nine railcars, one of which leaked chemicals onto agricultural farmland and woodlands. Emergency ...


    By Gasmet Technologies Oy

  • Groundwater: Low-flow Purging and Sampling

    Significant timesavings, improved sample process integrity, quality assurance and minimal quantities of potentially contaminated purge water to manage - are attractive as the focus on groundwater quality sharpens and economics demand best cost-benefit based methods Water has become a vitally important resource.  Maintaining its quality and quantity and avoiding pollution are set to be ...


    By Geotech

  • Air Sampling During NPP Accident

    There has been considerable interest recently generated regarding emergency air sampling protocols as a result of the Fukushima accident in Japan. A major concern involving air sampling requirements is the accurate determination of gaseous-radioactive iodine species emitted from the NPP to the environment as a result of an accident. During normal NPP operation gaseous radioactive iodine ...


    By F&J Specialty Products, Inc.

  • Installation of the fixed gas detection

    OC-F08 fixed gas monitor with the original imported sensor used to detect the Oxygen gas, combustible gas, toxic gas, CO2, etc. With the different working principle, Electrochemical sensor for O2 and toxic gas, Catalytic combustion sensor for combustible gas, PID sensor for the VOC, Infrared sensor for the CO2 ...

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Detection of moisture in ammonia gas

    Problem Statement As technologies advance, so does the request for ultra high purity ammonia. Ultra high purity (UHP) ammonia is used in the semiconductor industries, production of flat panel displays, and a number of other applications. Due to this rising interest in UHP ammonia, manufacturers are having to battle ammonia’s most prominent and damaging impurity--moisture. For ...


    By CIC Photonics, Inc.

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Degassing a Liquid for Your Syringe Pump

    Four common methods for degassing samples Methods for Degassing Liquid All solutions equilibrated at room temperature and pressure will contain dissolved gases. Sample degassing is the process of removing these dissolved gases from solution. Removal of these gases may be necessary because the gases may escape from solution and form air bubbles in your syringe, ...


    By Chemyx Inc

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • EPA studies identify techniques for critical leak testing prior to soil-vapor sampling

    Researchers at EPA’s National Risk Management Research Laboratory (NRMRL) in Ada, OK, are developing quality assurance (QA) measures for soil-gas and sub-slab sampling methods that help differentiate contaminant vapors due to vapor intrusion from background sources. Recent research focused on measures to identify leakage of ambient air into conventional vapor probes, which can significantly ...

  • Gas Monitoring for Ventilation Control and Energy Management

    The growing demand for underground and enclosed parking and maintenance garages (resulting from limitations on land availability) has increased the awareness and need for proper ventilation and control systems. In addition, increased health and safety programs have only added to the concerns of toxic and combustible gases in confined or enclosed spaces. Historically, ventilation and make-up air ...


    By Arjay Engineering Ltd.

  • Case study - QED pumps are the pumps of choice at North America’s largest landfill

    The Puente Hills Landfill in Los Angeles County, California, is the largest operating landfill in North America based on daily tonnage received.  Located in an unincorporated area of Los Angeles County near Whittier, California, it is owned and operated by the Sanitation Districts of Los Angeles County.  It has received approximately 118 million tons of solid waste as of April 2008, ...


    By Geotech

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Leak detection in semiconductor fab gas processes

    Problem Statement Often times in semiconductor fabs moisture levels are monitored to ensure that products aren’t damaged by excess moisture in the process. If there are above normal levels of moisture, pinpointing the source of that moisture can be difficult. The moisture could be evolving from impurities in gas tanks or leaks in the sampling lines. One way to avoid downtime ...


    By CIC Photonics, Inc.

  • Gas analysers support management of Swindon fire

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents. Arrangements have been made in England to bring together experts from the Environment Agency ...


    By Quantitech Ltd

  • Calculating the cost savings for refrigerant gas leak detection

    The real benefits of refrigerant gas leak detection Following on from the last article, we feel that it’s natural to then discuss some of the practical reasons (cost savings) that will encourage the industry to take action and reduce their F-Gas emissions. Who requires refrigerant leak detection under the F-Gas proposals? There are a ...


    By a1-cbiss

  • Design and Evaluation of a Flow Pump System for Column Testing

    The design of the equipment components of a flow pump system for the measurement of solute (effluent) breakthrough curves from soil columns is described. In addition, the performance of the system in terms of the effects of equipment components and temperature on measured differential pressure fluctuations across soil specimens is illustrated. The flow pump for the system provides continuous flow ...


    By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you