gas standard generator Articles

  • Recent Federal Developments

    TSCA/FIFRA EPA Extends Comment Period For Draft Guidance For Pesticide Registrants On Notifications, Non-notifications, And Minor Formulation Amendments: On October 5, 2017, the U.S. Environmental Protection Agency (EPA) issued a notice of extension of the comment period for the draft guidance  ...


    By Bergeson & Campbell, P.C.

  • Survey of standards related to gas detectors

    Recent events both on- and off-shore shine a bright light on the need for attention to safety and to hazard reduction, prevention, and mitigation. Errant combustible or toxic gases can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. Globally, governmental and regional authorities take gas detection and system integration very seriously and require that the ...

  • Follow toxic gas standards for a smoother project

    Toxic gases, such as Hydrogen Sulfide and Sulfur Dioxide, can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. The United States Occupational Safety and Health Administration (OSHA) and other authorities take detection of these gases very seriously. The American National Standards Institute/ American Petroleum Institute (ANSI/API) and ISA industry standards ...

  • Strategic Standardization

    An Interview with John Walter, CEO of the Standards Council of Canada SCC leader John Walter discusses the strategic value of standardization, his organization’s priorities and harmonizing Canadian and U.S. standards. How is the Standards Council of Canada approaching the upcoming revision to the Canadian Standards Strategy? The Standards ...


    By ASTM International

  • A Commitment to Standards

    An Interview with Philip Piqueira, Global Standards Leader for GE’s Industrial Solutions Business General Electric participates in standards development through its work on numerous committees and organizations. Philip Piqueira discusses why this business strategy and its continuance is crucial for GE. From your perspective as the global standards ...


    By ASTM International

  • Generator gas analyzer for monitoring of hydrogen cooled turbo generators

    Hydrogen cooled generators require safety measures that reliably prevent the formation of explosive gas mixtures during normal operation as well as maintenance periods. Thermal conductivity technology based gas analyzers are used for that task. A standardized CALOMAT 6 analyzer system - Set GGA - has been especially designed for this measuring task. Regarding redundancy and explosion ...

  • Composting generates cash for greenhouse gas benefits

    Chicago Climate Exchange (CCX) recently finalized an initiative to develop a protocol for issuing offsets to projects that avoid greenhouse gas (GHG) emissions through composting or other similar approaches. This article explores the development of the new protocol, reviews its key attributes and describes how an entity can earn tradable credits for its GHG mitigation project. In 1992, the U.S. ...


    By BioCycle Magazine

  • The real benefits of standardizing on a single LIMS in the gas and petroleum industry - Case Study

    Automation of laboratory data capture and analysis is claimed to be the major challenge facing the petrochemical industry. Indeed, elimination of manual processes leads to considerable product quality improvements while also aiding compliance with strict environmental regidations. As a result, companies that wish to remain ahead of the competition are standardizing on Laboratory Information ...

  • Primary Standard Gas Flow Calibration—The Only Guarantee of Accuracy

    At Sierra, we have a saying: “An instrument’s accuracy is only as good as its calibration.” The accuracy of your mass flow controller (MFC) is essential in assuring the efficiency, performance, and quality of your flow meter. In many cases, if your instrumentation is not calibrated, then a decline in performance is possible due to ...


    By Sierra Instruments, Inc.

  • Greenhouse gas protocol product life cycle accounting and reporting standard

    The GHG Protocol Product Life Cycle Accounting and Reporting Standard (referred to as the Product Standard) provides requirements and guidance for companies and other organizations to quantify and publicly report an inventory of GHG emissions and removals associated with a specific product. The primary goal of this standard is to provide a general framework for companies to make informed choices ...

  • A Workplace-generated Hazardous Substance - Exhaust Gas: Hazardous Substances Case Study

    This Case Study has been prepared as one of a series relating to hazardous substances in the workplace. This case study examines use of a machine which generates exhaust gas. Here the Workplace Health and Safety Regulation Part 13: Hazardous Substances does not apply. In this instance, the Advisory Standard for Hazardous Substances applies. ...


  • Generation using gas-fuelled engines in South Africa – an overview

    Most gas engines are Otto cycle spark ignition internal combustion reciprocating engines using natural gas as the primary fuel. Smaller models utilise stochiometric combustion while the larger engines are lean burn engines with pre-chamber ignition systems. The engines are coupled with packaged generator sets, ...


    By Clarke Energy

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Making a TO-15 Working Standard and the Super Standard Calculator – V2.01

    We already learned how to calibrate our TO-15 system, what our concentration units mean, and how to properly read our vacuum gauge while pressurizing samples. We are clearly going out of order here, because I have never covered how to prepare a working standard (necessary for ...


    By Restek Corporation

  • U.S. EPA`s Proposed Greenhouse Gas Standards for the Utility Industry - How Powerful Are They?

    A major event in the Climate Change arena occurred on March 27, 2012 when, for the first time, U.S. EPA proposed Standards of Performance for New Stationary Sources (NSPS) for emissions of carbon dioxide (CO2).  The proposed standards were specific to new affected fossil fuel-fired electric utility ...


    By All4 Inc.

  • Projected greenhouse gas emissions reductions from the power sector under the clean energy standard act of 2012, s. 2146

    This analysis provides an assessment of the projected power sector greenhouse gas (GHG) emissions reductions from S. 2146, the Clean Energy Standard Act of 2012 (CESA), introduced by Senator Bingaman and eight cosponsors on March 1, 2012.iCESA establishes a standard for clean energy generation in the United States through 2035.iiIn 2035 covered utilities must supply 84 percent of ...

  • Oxidation Catalysts for Co-Generation Plant

    Description Manuli Film, Naples, Italy, with three (3) Rolls Royce KVGS-18G2, lean burn, natural gas engines, each 3030 kW electrical. Thermal power is utilized both from exhaust gas and cooling water for plastic film production. Challenge Required to meet emission standard of 400 mg/Nm3 @ 5% O2 for carbon monoxide and 150 mg/Nm3 @ 5% O2 non-methane hydrocarbons. Solution ...


    By DCL International Inc.

  • What Gas Diffusion Layer (GDL) do I use for a Hydrogen Generator (Electrolyzer)?

    We've spoken already about Gas Diffusion Layer (GDL) selection for a Fuel Cell; today we will cover some GDL considerations for Electrolyzers. The Hydrogen side (Cathode) of an Electrolyzer (EZ) can be almost any gas diffusion layer GDL (or even no GDL) that you would like and that fits your ...


    By Fuel Cells Etc

  • Improving Safety by Conforming to Industry Standards and Certifications

    Abstract Globally, safety standards play a key role in designing and executing gas and flameame detection projects. How can these standards, which might seem cumbersome at times, help users make informed decisions? What information can be used to assist in conforming to standards and maximizing safety? This paper will analyze standards from an end-user view, will consider ...

  • Xylem unveils fifth generation HYDROVAR

    Highly efficient variable speed drive reduces energy consumption Xylem, a global water technology leader, has released the fifth generation HYDROVAR, an intelligent pump controller that accurately adapts to system demands, helping end users realize cost and energy savings while achieving optimum system performance. The new drive can reduce energy consumption of a pump by as much as 70 ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you