gas turbine air pollution control Articles

  • Intelligent Pollution Control

    The world faces difficult pollution control decisions. For every dollar spent on pollution control, there is an alternative investment in health improvement. For every dollar spent on reducing one pollutant, there is an alternative to reduce another. The most prudent course to make the best investment should include: Intelligent uncertainty Intelligent classification of options ...


    By The McIlvaine Company

  • Petroleum Refining Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Air filtration applications for membranes

    Given their unique performance attributes membranes are finding use in a growing number of high efficiency air filtration applications. One example is in respirators and personal protective equipment. Applications where intense physical demands and risk of exposure to harmful contaminants are present demand the high efficiency / low pressure drop combination of expanded polytetrafluoroethylene ...

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Annual European Union greenhouse gas inventory 1990–2014 and inventory report 2016

    ES.1 Background information on greenhouse gas inventories and climate change The European Union (EU), as a party to the United Nations Framework Convention on Climate Change (UNFCCC), reports annually on greenhouse gas (GHG) inventories for the years between 1990 and the current calendar year (t) minus two (t–2), for emissions and removals within the area covered by its Member ...

  • NOx re-burn simulation in a double-jet counter-flow flame

    The paper investigates the main features of NOx emission in a laminar double-jet counter-flow diffusion flame for later use as a possible physical model for NOx reduction through turbine in situ reheat. The oxidizer stream consists of exhaust gas resulted from a conventional combustor and the fuel stream is represented by an air?methane mixture. The main interest rests on the distribution of NOx ...


    By Inderscience Publishers

  • WESPS continue to deliver

    Compliance with the increasingly stringent air pollution regulations of recent years is not the only reason forwardthinking industry leaders are adopting more sophisticated gas cleaning and air pollution control strategies. The desire to achieve higher performance efficiencies, control costs in a competitive marketplace, and stay ahead of the regulatory compliance curve is another driver of ...


    By Beltran Technologies, Inc.

  • Small project PSD cautions

    Following U.S. EPA’s promulgation of the PSD and Title V GHG Tailoring Rule, electric utilities, facilities with large industrial boilers, and other heavy industry manufacturing operations should be aware that the Prevention of Significant Deterioration (PSD) significance threshold for greenhouse gases (GHGs) may be the most stringent PSD triggering threshold for certain projects. Even ...


    By Trinity Consultants

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Is it better to burn or bury waste for clean electricity generation?

    The use of municipal solid waste (MSW) to generate electricity through landfill-gas-to-energy (LFGTE) and waste-to-energy (WTE)projectsrepresentsroughly14%ofU.S.nonhydrorenewable electricity generation. Although various aspects of LFGTE and WTE have been analyzed in the literature, this paper is the first to present a comprehensive set of life-cycle emission factors per unit of electricity ...


    By Novo Energy, LLC

  • Taking Fossil Fuels to the Next Level - Standards Underpin Extraction, Processing and Distribution

    To the average person, the oil and gas industry may appear simple — a matter of literally tapping into a natural resource and distributing it to customers. Of course the matter of extraction is rarely simple, and in the case of emergent hydraulic fracturing technology, it is particularly complex and capital-intensive. In fact, the world of petroleum and natural gas extraction, distribution ...


    By ASTM International

  • CEMS: An Overview

    We've written an overview to where CEMS are required, types of site that require CEMS and future requirements. Continuous Emissions Monitoring Systems are used to continuously collect, record and report data from industrial process operators that produce emissions to air. CEMS are used as a means to comply with ...


    By a1-cbiss

  • The Chemical Aspect of NOx Scrubbing

    With the passage of the 1990 Clean Air Act Amendments, many chemical and metal industries and utility producers will now be required to further limit the amount of NOx (Nitrogen Oxides) produced. NOx is a precursor to ozone in the atmosphere, and is believed to be a major contributor to acidic deposition (acid rain). Formation of ozone: NOx is produced in a variety of ...


    By CR Clean Air Group, LLC

  • NESHAP SSM exemption Vacatur mandated by the DC circuit

    The National Emission Standards for Hazardous Air Pollutants (NESHAP), codified in 40 Code of Federal Regulations (CFR) Part 63, set emission standards and monitoring, recordkeeping, and reporting requirements for specific source categories that emit HAPs. NESHAP Subpart A, the General Provisions, includes general requirements for NESHAP subject facilities, including provisions for startup, ...


    By Trinity Consultants

  • Preparing for EPA’s mandatory reporting of greenhouse gases rule

    Recent action by the US EPA to finalize the Mandatory Reporting of Greenhouse Gases (GHG) Rule means that environmental managers must now seriously examine whether they are fully prepared to address the imminent requirements. This article provides some assistance by summarizing key points regarding the final versus proposed rule, providing clarification on key questions that have arisen since the ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you