gas turbine inspection Articles

  • Turbine Inspection

    Recent advances in natural gas exploration and extraction technology have led to skyrocketing projections of the amount of recoverable natural gas within US borders. This energy boom will result in the expanded use of gas-fired power plants to provide electricity to US homes and businesses over the coming decades. Not only does this mean cleaner and more abundant energy for the US environment and ...


    By RF System Lab.

  • In situ weld repair of blade tenon of steam turbine in a power plant

    During one of the routine inspections in a nuclear power plant, it was found that a tenon of one of the third-stage blades of the Low-Pressure (LP) turbine had been worn/broken off the turbine blade, leaving only the remaining tenon riveted to the shroud piece. With only one of the two tenons remaining, the blade was at risk of getting freed from the shroud piece. Hence, it was necessary to ...


    By Inderscience Publishers

  • Unbeatable Proximity

    When it comes to refurbishing a rotor in a power plant, delivery time and shipping costs play a major role. Because of its nearby service center, Sulzer was able to make an unbeatable offer to an Indonesian customer and even bring a retired rotor back into operation. Indonesia contains large oil reserves, e.g., at the Duri Field in Sumatra. There, a cogeneration power plant ...


    By Sulzer

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • Retrofit decreases dissolved oxygen at low load

    Teresa Hansen, Section Editor Entergy’s Little Gypsy Unit 2 is a 450 MW gas-fired (with an oil alternative) thermal power plant originally designed for base load operation. Since changing over to peaking power operation, the plant has had problems with excessive dissolved oxygen (DO), especially during periods of low load. Entergy hired Intek Inc. to use a nontraditional ...


    By Intek, Inc.

  • PULSE smart start – a user’s experience

    Measuring on a Grounded Aeroplane   In the early days of PULSE, a team from Brüel & Kjær had the opportunity of performing a ground test on a Boeing 767. The left engine of the aeroplane had undergone a scheduled overhaul. The engine was reassembled and verified in a test cell. Everything seemed fine. The engine was mounted on the aeroplane and the aeroplane was ...

  • Overhaul Completed in Just 30 Days

    Sulzer completed an overhaul of three General Electric steam turbines and five Clark compressors for a large ethylene plant in Colombia. Sulzer’s service centers in Texas and Bogotá worked together to inspect and repair the three turbines. Sulzer staff helped the customer with project planning, full commissioning, and testing within a very tight timeframe. The city of ...


    By Sulzer

  • Solving waste oil management and removal problems in power generating plants

    If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to these ...


    By Oil Skimmers, Inc.

  • A Commitment to Standards

    An Interview with Philip Piqueira, Global Standards Leader for GE’s Industrial Solutions Business General Electric participates in standards development through its work on numerous committees and organizations. Philip Piqueira discusses why this business strategy and its continuance is crucial for GE. From your perspective as the global standards ...


    By ASTM International

  • Condenser Tube Cleaning System Custom Design & Fabrication

    Dominion Power is one of United States’ largest producers and transporters of energy, with a portfolio of approximately 25,700 megawatts of generation and 6,500 miles of electric transmission lines. Dominion serves more than 5 million utility and retail energy customers in 14 states. ...


    By Innovas Technologies LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you