gas turbine monitoring Articles

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Gas turbine compliance emissions test case study

    CKwas retained by Lake Road Generating Company, LP (Lake Road) to conduct a compliance emissions test program on three combustion turbine and heat recovery steam generators (CT/HRSG). The purpose of this program is to demonstrate that emissions from the CT/HRSGs are within the emission limits specified in the operating permit issued by the Connecticut Department of Environmental Protection ...


    By CK Environmental, Inc.

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Permit Compliance Monitoring for the Power Generation Industry

    The Clean Air Act Amendments (CAAA) of 1990 authorized EPA to develop regulations requiring facilities to monitor the adequacy of emission control equipment and plant operations. This paper discusses the various methods available for coal-fired power plants and gas turbine installations to demonstrate a reasonable assurance of facility compliance with emission limitations, and ensure that control ...

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Continuous biogas monitoring with AEMS in South Korea

    Application Biogas research projects Equipment AEMS biogas analyser Location South Korea Customer KEPCO Research Institute Requirement The customer ...


    By Geotech

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Case study - Water quality monitoring and weather data at Pampulha Lake-Brasil

    In 2010, OTT Hydromet's partner in Brasil,  Hexis began working with CETEC. This resulted in the installation of a buoy, equipped with an automatic profiling system, in early 2013. The project’s objective is the continuous monitoring of the lake’s water quality, with focus on improving this by the 2014 World Cup Games.  Adcon, Lufft and OTT technologies (Hydrolab DS5X ...


    By The OTT Hydromet Group

  • Digester Developer Taps Natural Gas Markets

    IN the late 1990s, Dan Eastman and two colleagues were researching business opportunities in the renewable energy industry. They were looking for a commercially viable technology that could take renewable energy from an experimental phase to a solid business investment. In 1999, Eastman and his partners founded Microgy, Inc., with its base in Wisconsin. The company licensed the Xergi anaerobic ...


    By BioCycle Magazine

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • Case Study: Monitoring Fuel Treatment with On-Site Fuel Analysis

    Version 8 of our industry leading SpectrOil Optical Emission Spectrometers offers significant performance improvements and enhanced productivity. In particular the sensitivity of the instrument has been improved markedly to allow detection of trace metals down to the part per billion (ppb) level. This capability is particularly important to power generators using liquid fuel, as high levels ...


    By Spectro Scientific

  • Annual European Union greenhouse gas inventory 1990–2014 and inventory report 2016

    ES.1 Background information on greenhouse gas inventories and climate change The European Union (EU), as a party to the United Nations Framework Convention on Climate Change (UNFCCC), reports annually on greenhouse gas (GHG) inventories for the years between 1990 and the current calendar year (t) minus two (t–2), for emissions and removals within the area covered by its Member ...

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • A Faster and Better FluidScan with Version 5

    Measure water contamination in turbine oils down to 300 ppm The latest version of FluidScan software can detect total water presence as low as 300 ppm in turbine oils.  The method provides an alternative to laboratory tests such as Karl Fischer titration when fast, simple, and reagent-free analysis is needed. In addition to measuring water contamination, the FluidScan ...


    By Spectro Scientific

  • Combined Heat and Power (CHP) essentials

    'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...


    By Inderscience Publishers

  • Pushing the Limits of Reengineering

    Cutting-edge turbine technology enables more efficient and cleaner power generation. However, the service of advanced gas turbines is challenging—especially when parts need to be replaced. The example of a blade replacement project shows how Sulzer establishes innovative reengineering processes and contributes to a secure energy supply that causes less carbon emission. A Sulzer ...


    By Sulzer

  • Case study - E.ON Power Plant Nuremberg

    Water level, water flow and discharge are monitored at two inflows of the E.ON electricity power plan Franken I, using the OTT SLD, with horizontal Doppler-flow sensors. The purpose of this measurement is to optimize the operation of the plan which partly covers the demand for electricity in the conurbation of Nuremberg-Fuerth-Erlangen.  OTT technologies for this project have been in use ...


    By The OTT Hydromet Group

  • Understanding fuel switching under the EU ETS

    Since the creation of the European Union Emission Trading Scheme (EU ETS), European power producers have monitored carbon emissions resulting from the composition of their production. Fuel switching is the main short–term abatement measure under the EU ETS. It consists in substituting combined cycle gas turbines (CCGTs) for hard–coal plants in off–peak power generation. Thereby coal plants run ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you