geophysical mapping Articles

  • General mapping

    This is a collection of various cases where the 2D resistivity imaging method pioneered by Advanced Geosciences Inc have been successfully applied. Click on a section ...


    By Advanced Geosciences, Inc.

  • Geophysical applications to solid waste analysis

    Abstract: Case studies of regional landfills show that electromagnetic geophysical methods can accurately and inexpensively define boundaries and thickness of waste. Degradation of putrescible solid waste generates conductive leachate that can be imaged with a frequency-domain terrain conductivity meter. Terrain conductivity measurements can be modified through a simple algorithm based upon ...


    By Geonics Limited

  • General Mapping Case Study

    This is a collection of various cases where the 2D resistivity imaging method pioneered by Advanced Geosciences Inc have been successfully applied. Click on a section below and you will be shown a full 2D resistivity imaging brochure detailing the case in question. Acknowledgement: These cases have been submitted by satisfied customers whom we thank for permission to publish ...


    By Advanced Geosciences, Inc.

  • Mapping sediment thickness case study

    Polk County, Florida Bathymetric and sub-bottom surveys were conducted within a clay settling pond at a Phosphate mine in Central Florida. Prior to the geophysical survey, a depression or slump had formed along the northern dam of the pond. The purpose of the study was to map various sediment layers within the pond to help determine if the depressions or slumps were related to sinkhole ...


    By GeoView, Inc.

  • Integrated Geophysics: GPR and EMI surveys at an air force base

    PROJECT: GPR and EMI surveys at closed metallic waste disposal sites LOCATION: Hill Air Force Base Annex near Ogden, Utah PROJECT DESCRIPTION: Designed and performed a GPR survey in tandem with an EM-31 terrain conductivity survey regarding two suspected Mg/Th aeronautical debris dump sites at an Air Force base in Utah.  Survey was designed to ...


    By ECA Geophysics

  • Integrated Geophysics: GPR and metal detection surveys at a retail facility

    PROJECT: GPR and EMI surveys at an active Safeway grocery store parking lot LOCATION: Rapid City, South Dakota PROJECT DESCRIPTION: Designed and performed a GPR survey in tandem with an EM-61 metal detection survey of a parking lot for a Safeway store in Rapid City, South Dakota. Surveys were designed to detect buried metallic and non-metallic drums and ...


    By ECA Geophysics

  • Integrated Geophysics: Magnetic / EMI surveys at an air force base

    PROJECT: EMI and Magnetic surveys at closed waste disposal sites LOCATION: Holloman Air Force Base near Alamogordo, New Mexico PROJECT DESCRIPTION: Designed and performed total-field magnetometer surveys in tandem with EM-31 terrain conductivity (EMI) surveys of approximately 53 acres of closed landfills at an Air Force base in New Mexico.  Survey ...


    By ECA Geophysics

  • Integrated Geophysics: GPR and EMI surveys at an air force site in the Mojave desert

    PROJECT: GPR and EMI surveys at closed waste disposal sites LOCATION: Cuddeback Air-to-Ground Gunnery Range in the Mojave Desert near Ridgecrest, California PROJECT DESCRIPTION: Designed and performed a GPR survey in tandem with an EM-31 terrain conductivity survey of nine closed landfilling areas at an abandoned Air Force gunnery range located in the ...


    By ECA Geophysics

  • Integrated Geophysics: Magnetic and EMI surveys at a solid waste landfill

    PROJECT: Magnetic and EMI surveys at a closed municipal solid waste landfill site LOCATION: Pasco, Washington PROJECT DESCRIPTION: Designed and performed a total-field magnetometer survey in tandem with an EM-31 terrain conductivity survey of a closed municipal solid waste landfill located east of Pasco, Washington.  Survey was designed to detect ...


    By ECA Geophysics

  • Utility Locating and Mapping at a Power plant case study

    An expansion was planned at a power plant in west central Florida. As part of the design build plan, all of the utilities within the proposed building footprint had to be located and mapped. There were two phases of the investigation. Utility designation was the first phase. This involved studying existing as-builts, performing site walkthroughs with plant personnel in order to ascertain a ...


    By GeoView, Inc.

  • Mapping Top of Rock with Seismic Refraction and ERI case study

    Industrial Facility, Tennessee An environmental assessment and remediation design project was conducted at a chemical manufacturing facility in eastern Tennessee. As part of the project, GeoView was asked to determine the depth to limestone bedrock underlying the project site and identify any suspected karst features within the upper portion of the limestone stratum. ...


    By GeoView, Inc.

  • Using GPR to map rebar and post tension cables case study

    Building Renovation - Boston, MA Our client was tasked to install new plumbing lines as part of a building renovation. This task involved drilling cores through each floor of the building. Geoview was contracted to locate the rebar and post tension cables to determine safe coring locations. The geophysical investigation was conducted using Mala and GSSI Structure Scan ground ...


    By GeoView, Inc.

  • Mapping Sand Unit Thickness for Construction Aggregate in North Carolina - Case Study

    In August 2015, Pyramid Environmental was contracted to estimate the cubic yards of sandy soil valuable as a construction aggregate on the 230 acres of undeveloped land in North Carolina. Purpose The purpose of the electrical ...


    By Advanced Geosciences, Inc.

  • Magnetic and ground probing radar measurements for soil pollution mapping in the industrial area of Val Basento (Basilicata Region, Southern Italy): a case study

    Abstract  The joint application of electromagnetic techniques for near-surface exploration is a useful tool for soil pollution monitoring and can also contribute towards describing the spatial distribution of pollutants. The results of a geophysical field survey that was carried out for characterizing the heavy metal and waste disposal soil pollution phenomena in the industrial area of Val ...


  • Unexploded ordinance case study

    Jacksonville, Florida A geophysical investigation was conducted at a World War II era bombing range in the eastern United States. The site was approximately 2,000 feet by 300 feet in plan dimension. Historical information indicated that MK23 practice bombs, 2.75” rockets, and 100 pound practice bombs were used at the site. The purpose of the geophysical investigation was to ...


    By GeoView, Inc.

  • Underground storage tanks case study

    MacDill Air Force Base A Phase II environmental site assessment was conducted at a military base in the southeastern United States. As part of the ESA, GeoView was contracted to perform the geophysical site assessment. The purpose of the geophysical investigation was to determine the presence and location of any underground storage tanks that may be buried within the boundaries of the ...


    By GeoView, Inc.

  • In situ remediation: enhancement technologies for remedial success

    Vol 24 No. 1  Winter 2012 HAZMAT MANAGEMENT Magazine  REMEDIATION: IN SITU  pp 42-44 Fracture - emplacement of 140 tons of Zero Valent Micro-iron/cellulose substrate  into TCE- impacted sandstone bedrock at a former air force missile base site near Windsor, Colorado. Three dimensional mapping of ZVI fractures using tiltmeter geophysics.  Treatment results after 21 months ...

  • Seismic Reflection Method

    Compiled and rigorously edited stacking velocity data to produce velocity maps at specified travel time intervals. These maps were verified to be extremely accurate, enabling exploration staff at AMOCO Production's Alaska North Slope group to make much needed time-depth conversions. Produced time-structure Maps via interpretation of Gulf Coast seismic reflection data while employed with Conoco, ...


    By ECA Geophysics

  • A GIS-based methodology to delineate aquifer recharge areas

    A GIS-based methodology to delineate risk areas for contamination of groundwater resources is presented by identifying recharge conditions to the aquifer. Identifying the recharge areas is based upon surface and subsurface geologic conditions that may control the risk of potential oil spill contaminants into the aquifer. This study uses the Chicot aquifer system in southwest Louisiana as a pilot ...


    By Inderscience Publishers

  • Case Study - Pipeline Subsidence

    Looking for sinkholes Pyramid Environmental recently performed a geophysical investigation for the National Park Service at Carlsbad Caverns National Park in Carlsbad, NM. The survey used electrical resistivity mapping (ER) to look for potential underground caves or caverns near an area designated for the construction of an underground utility line. A 2D resistivity survey ...


    By Advanced Geosciences, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you