geotechnical monitoring Articles

  • New Geotechnical Tiltmeter with MEMS Technology

    Introducing the 850 MEMS Tuff Tilt Series, the latest addition to Jewell Instruments’ electrolytic tiltmeter line for geophysical & geotechnical applications. This versatile, rugged, weatherproof tiltmeter is a low-cost alternative to most sensors ...


    By Eneco

  • Time Is Important To Help You Find the Best Provider of Geotechnical Monitoring Services

    If you visit any city in the world, you will find multiple tall buildings where people reside with their near and dear ones. In the good old days, building such tall structures often took several days to complete. However, with the advanced technologies being used in these modern times, constructing a new building hardly takes a few days. For a common man, it is not possible to understand the ...


    By Soldata Limited

  • Soil Column Drainage Modelling Using a Geotechnical Centrifuge

    Equipment has been developed to facilitate supplying a soil column with water or draining a soil column under conditions of constant head while the soil column is under centrifugal forces in a geotechnical centrifuge. Accurate monitoring of the water mass transfer is also facilitated by the equipment. At the completion of a modelling sequence, the soil column may be partitioned for moisture ...


    By ASTM International

  • The Application of Time Domain Reflectometry in Geotechnical Instrumentation

    The performance of road pavements and earth structures is dependent on the moisture regime experienced during their service life. One of the practical challenges in understanding moisture regimes in earth structures has been to continuously monitor moisture fluctuations in a nondestructive and reasonably accurate way. The time domain reflectometry (TDR) device shows considerable promise in ...


    By ASTM International

  • Staying Safe with Environmental Monitoring

    Geotechnical Instrumentation involves administering the earth and environment and it is hence that designers have made different frameworks to make the occupation simpler. These frameworks grab thousands upon much information that it orders and illuminates so they can concoct evidence. The places where it is necessary are the pollution chance appraisal, trends in time and space; anticipatory ...


    By Soldata Limited

  • Monitoring and warning system - case study

    TenCate GeoDetect is the first sensor enabled geotextile on the market to provide soil reinforcement, structural health monitoring and an early warning system into one package. Our “intelligent geotextile” is the first system designed specifically for geotechnical applications and offers a technical solution for monitoring geo-structures for changes in strain, temperature or the ...

  • Need of Surveillance and High Quality Monitoring

    With the rise in unwanted scenarios in nature due to the man-made activities in the environment a severe need for proper surveillance of various disasters causing factors is a must in the current prevailing situations. An uncountable millions of lives are being lost every year due to accidents or natural calamities. The squandering caused by such undesirable phenomena’s can be curtailed by ...


    By Soldata Limited

  • Smart Monitoring Solutions for a Hassle Free Project

    Geotechnical monitoring is very much responsible for the successful completion of any project. This monitoring is done with the help of the geotechnical systems. There are different companies that provide the customized solutions for the geotechnical monitoring. Such solutions include comprehensive programming like designing the systems, installation and delivering on the site, access of the data ...


    By Soldata Limited

  • Case study - CO2 monitoring for Sustainagro

    About the customer Sustainagro Ltd is based in Dundee, Scotland, providing scientific services: chemical and microbial testing of soils, composts and water samples Challenges the customer faced According to former development manager for Sustainagro, Adrian Parker, before the lab had the G100 and could measure in real-time it used a titration method: ...

  • Case study - CO2 monitoring for Pfizer

    About the customer Based in Kent, England, Pfizer is a worldwide biopharmaceutical company. Gem Scientific supplied the company with a Geotech G100 to suit their specific incubator requirements. How the company uses the G100 Pfizer uses Geotech's G100 portable CO2 analyser to quality check their 25 medical ...

  • Case study - Monitoring landfill gas

    Infrared absorption Infrared absorption is usually the preferred method for measuring methane and carbon dioxide. Most gases absorb radiation in the infrared region. The wavelength of radiation that is absorbed is determined by the natural vibration frequencies of the molecule. These natural frequencies will depend on several factors. Thus different gas molecules have different natural ...

  • Carbon dioxide monitoring for food processing

    Application Carbon dioxide monitoring for food processing Equipment G100 CO2 analyser Location Okehampton, UK Customer Kerry Foods Requirement The customer was looking for a CO2 monitor to detect small changes in CO2 levels in the headspace above food products ...

  • GA3000 monitors graves in Korea case study

    Application Research into gases produced by animal carcasses Equipment GA3000 Location Korea Customer A Korean government research facility supplied and supported by ENInstrument. ...

  • Case study - CO2 monitoring for Kerry Foods

    About the customer Kerry Foods, based in Okehampton, England develops, manufactures and delivers technology based ingredients for the worldwide food and beverage industry The Geotech product G100 CO2 analyser How the company operates The Kerry Foods plant processes food ingredients, such as fruit conserves and confectionery ...

  • CDM monitoring & reporting for carbon credits case study

    Abridged from a Wastecon 2008 Presentation and Paper by Mitchal L. Cassel LANDTEC, Colton, California The project sites The project is in Brazil and obtains certified emission reductions (CER) or carbon credits for a large scale, waste handling and disposal, clean development mechanism (CDM) project. Methane emissions are being reduced through collection and destruction of ...

  • Unmanned remote and wireless CDM monitoring case study

    Remote and wireless monitoring technology to meet CDM requirements is in its infancy in Europe. Carbon trading is driving it globally, especially in North and South America. That experience and technology is now finding a demand in Europe and Asia in landfill, biogas from food and animal waste in digesters and water treatment sludge digestion. Methane recovery from landfill and anaerobic ...

  • Continuous AD monitoring for McCain`s CHP case study

    Application Anaerobic digestion Equipment AEMS Location Whittlesey, United Kingdom Customer McCain Foods Requirement McCain Foods corporate affairs director, Bill Bartlett said, “The Geotech static gas analyser is here to analyse gas quality as it is ...

  • Enitial use TDL-500 for emissions monitoring - Case Study

    Application CH4 leak detection and emissions monitoring and mapping Equipment TDL-500 coupled with the 'enidata PDA' Location United Kingdom Customer enitial Requirement enitial are currently using the TDL-500 connected to an enitial enidata PDA to undertake high detailed ...

  • Case study - Monitoring sewage sludge AD for Southern Water

    To check sludge AD, Southern Water uses portable biogas analysers specially developed for AD biogas and based on proven methane and associated gas analysis equipment from Geotech. Southern Water has an important routine; every single day it checks the health of its sewage sludge anaerobic digesters on eighteen sites across Hampshire, IoW, Sussex and Kent. There, each day Southern Water ...

  • Are environmental monitoring manufacturers pulling a fast one with back-to-base servicing?

    Geotech's users of environmental monitoring equipment are not alone in their frustration at having valuable equipment unavailable when they require servicing.  Is this just a money-making scam?  What do users get for their money?  By combining maximum possible local support with a 100-point factory full service schedule, Geotech believe they have the best balance of user ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you