geotechnical software Articles

  • Geotechnical examples

    This is a collection of various cases where the 2D resistivity imaging method pioneered by Advanced Geosciences Inc have been successfully applied. Click on a section below ...


    By Advanced Geosciences, Inc.

  • Vertical Electrical Sounding for Geotechnical Site Characterization - Case Study

    Background The site borehole information demonstrates that the sediments are sitting on the top of Ignimbrite and there is also fractured Ignimbrite weathered with the content of clay is located at the bottom.  Purpose The study was made to determine the sedimentary thicknesses as well as to obtain the contact between ...


    By Advanced Geosciences, Inc.

  • Geotechnical Site Characterization on a Cliff for a Dam Construction - Case Study

    Background There are many cracks, joints, fractures and karstic spaces on the measurement surface of Limestone. Purpose The main subject of this study is for searching karstic features and voids within the body of local limestone for dam construction.  Process The ...


    By Advanced Geosciences, Inc.

  • Pick of the programs: slide & rocsupport

    The Geotechnical and Geo-environmental Software Directory (GGSD), established in February 1996 by Mott MAcDonald's Tim Spink, provides the most comprehensive listing of geotechnical/geoenvironmental software available. This directory (www.ggsd.com) is revised every two monthe. Here we summarise updated and new entries in the geotechnical category since February and Spink reviews ...


    By Rocscience Inc.

  • Smart Monitoring Solutions for a Hassle Free Project

    Geotechnical monitoring is very much responsible for the successful completion of any project. This monitoring is done with the help of the geotechnical systems. There are different companies that provide the customized solutions for the geotechnical monitoring. Such solutions include comprehensive programming like designing the systems, installation and delivering on the site, access of the data ...


    By Soldata Limited

  • Geotomography in Site Investigation: Simulation Study

    Tomography is the reconstruction of images from measurements of line integrals. It is used in a variety of scientific and technical applications. Advances in electronics and computers make the technique accessible to geotechnical engineering. The combination of penetration testing and tomographic reconstruction would result in a powerful site investigation tool.A tomographic software was ...


    By ASTM International

  • Research leads to more efficient mining projects

    Over the last 10 years underground mining excavations around the world have become more reliable and efficient, thanks to a package of software programs designed intially by researchers at the faculty. Incorporating leading-edge geomechanics research findings into easty-to-use software tools for the geotechnical and mining industries. Professor John curran, Robert M. Smith Chair of Georechnical ...


    By Rocscience Inc.

  • Random fields in SVSlope and SVFlux

    Geotechnical engineering, as a general practice, has always struggled with quantifying the significant amount of variability that can be present at any given site. There may be variability present in field sampling methods, equipment, lab testing procedures, level of training of field personnel, or many other such factors. One particular problematic aspect of slope stability analysis is the ...


  • Business development

    One of the primary advantages of the SVOffice geotechnical software suite is that it allows consulting firms to develop new areas of business and revenue streams. This aspect of the software has been demonstrated by Golder Associates Africa. The Midrand office approached SoilVision Systems Ltd. about one and a half years ago with the desire to increase their numerical modeling capabilities. In ...


  • Turbidity Warning System

    Morgan Est Contractors for National Grid Supply and installation of telemetred groundwater monitoring network, May 2006 ongoing Hydro-Logic recently completed the supply and installation of borehole instrumentation and a telemetry monitoring system to monitor groundwater conditions in 28 observation wells located at 19 sites in the vicinity of Croydon. The ...

  • National Grid, Croydon case study

    National Grid, Croydon Morgan Est Contractors for National Grid Supply and installation of telemetred groundwater monitoring network, May 2006 - ongoing Hydro-Logic recently completed the supply and installation of borehole instrumentation and a telemetry monitoring system to monitor groundwater conditions in 28 observation wells ...


    By Hydro-Logic Services

  • 2D Resistivity Imaging for Locating Concrete Pipe - Case Study

    Background There are 8 wells that suply water to the communnity through about 2m diamter concrete aqueduct.  Purpose The main subject of the field tes was to determine the geotechnical site characterization of the area to correlate the results obtained through the 2D resistivity imaging and the infromation of the concrete ...


    By Advanced Geosciences, Inc.

  • National Grid, Croydon case study

    Morgan Est Contractors for National Grid Supply and installation of telemetred groundwater monitoring network, May 2006 - ongoing Hydro-Logic recently completed the supply and installation of borehole instrumentation and a telemetry monitoring system to monitor groundwater conditions in 28 observation wells located at 19 sites in the vicinity of Croydon. The project was required to ...


    By Hydro-Logic Services

  • 2D to 3D model extrusion

    The creation of three-dimensional numerical models is often complicated by the fact that it is difficult to describe three-dimensional geometry into the computer. A number of different paradigms have been developed for the entry of three-dimensional geometry. Currently, SVOffice 2009 supports two separate paradigms for the entry of three-dimensional geometry in a numerical model. These paradigms ...


  • Analyzing and representing Downhole information on a daily basis using ESdat and Encom Discover - Case Study

    GHD used ESdat to optimize data collection and analysis and minimize data handling when working with downhole data information. 3D data output was provided by Encom Discover. Overview GHD is an professional services consultancy – 6000+ staff and offices in Australia, Middle East, Asia & Americas.  GIS used extensively within GHD with a ...

  • Why perform 3D slope stability analysis

    Background The benefits associated with performing 3D slope stability analyses were expounded by Dr. Del Fredlund in the 1970s.  Over the years a number of 3D methods of analysis have been researched. These methods have ranged from the method of columns to approaches based on variational calculus, and more recently, the use of dynamic programming. The interest in 3D slope stability analysis ...


  • Draper Aden Associates counts the benefits of adopting InfoWorks

    Consulting engineering firm Draper Aden Associates has recently begun using InfoWorks for hydraulic modeling and Project Manager Jim O’Dowd has already discovered many advantages of both the water supply and wastewater versions. “In the short time I have been using InfoWorks, I have identified a lot of invaluable ways in which it will prove useful to my clients,” he says. “Clients who had not yet ...


    By Innovyze

  • Alternate point estimation method

    One of the primary drawbacks to a Monte Carlo analysis is the large number of model runs required in order to determine the relative confidence of each input variable on impacting the factor of safety. The Alternate Point Estimation Method (APEM) allows a dramatic reduction in the number of model runs required to do a statistical analysis. The following table indicates the number of model runs ...


  • Feasibility study & master plan for water supply reservoir

    Client: North Central Missouri Regional Water Commission   Completion Date: 2003  Project Summary  Burns & McDonnell completed the feasibility study and master plan for a new water supply reservoir in Sullivan County, Mo. Sullivan County and other surrounding counties experienced severe drought conditions for several years and existing water ...


    By Burns & McDonnell

  • Scanning for Leaks & Sinkhole Detection in a Retention Pond - Case Study

    In January 2015, one of our clients used AGI tools and software for leak and sinkhole detection in the liner of a retention pond in Tennessee. Process Our client’s customer had a retention pond that was designed to hold liquid, but it was leaking through a hole in the liner. The client used the ...


    By Advanced Geosciences, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you