grease degradation Articles

  • A critical review of experimental and predicted methane generation from anaerobic codigestion

    Anaerobic digestion is increasingly being considered as a treatment option for an extensive range of waste biomass, due to the potential for energy recovery, in the form of methane production, and lower sludge volumes relative to aerobic treatment processes. Furthermore, when two substrates are codigested (i.e. digested together), added benefits are foreseeable, such as increased methane ...


    By IWA Publishing

  • Bioreactor installation - ministry of defence site, scotland, united kingdom

    Introduction A Bioreactor has been installed by Microbac at an MOD transit training camp in Scotland for army personnel. Occupation of the site varies widely, with as little as twelve persons, for short periods of time, and up to two thousand personnel at maximum occupancy Treatment For this reason, the client requested a system which required little day ...


    By Microbac Ltd

  • Assessment Of Tropical Grasses And Legumes For Phytoremediation Of Petroleum-Contaminated Soils

    Phytoremediation is a promising technology for the clean-up of petroleum-contaminated soils, especially in the tropics where climatic conditions favour plant growth and microbial activity and where financial resources can be limited. The objective of this work was to identify tropical plant species from the eastern savannahs of Venezuela suitable for this technology. Three legumes (Calopogonium ...


    By Springer

  • Investigation of options to remove the fat based deposits in the anaerobic digestion facility

    1.0 Introduction The effluent from Greencore is treated by a hybrid AD facility which incorporates UASB granular sludge bed and fixed film media technology. The plant is not designed to treat fats, oils and greases and the presence of fats, oils and grease (FOG) has two detrimental effects on plant performance, namely; FOG’s coat the UASB sludge granules causing then to ...


  • Bioremediation of soil

    In our experience, Bioremediation is best accomplished with Bio-augmentation, the addition of large numbers of selected micro-organisms grown in the production laboratory. In addition to bio-augmentation, several physical and chemical parameters must be controlled in order to obtain optimal growth and maximum degradation of soil contaminants. The major factors that are controlled during ...

  • Missouri city wastewater treatment plant case study

    Project Summary Missouri City selected In-Pipe Technology, Inc. to provide a collection system bioaugmentation program reduce influent load, energy costs and sludge production at the wastewater treatment plant (WWTP). The program is also designed to control fats, oil and grease (FOG) accumulation and odor in the collection system. In-Pipe Treatment Strategy ...

  • System for bioremediation of effluents

    Executive Summary The remediation process of commercial, municipal, industrial and agricultural wastewaters has employed combinations of sulfuric acid, caustic, petroleum based solvents and synthetic emulsifiers, which are either toxic or generally non-biodegradable. An alternate method using naturally occurring microorganisms has been utilized for many years to facilitate the remediation ...


    By NCH Corporation

  • Fat Trap case study

    During the summer season at a busy National Park, we were asked to give assistance with a blocked soakaway drain. Due to the location and the time of year the soakaway had to be treated rapidly and with the minimum of disturbance. Then drain received combined effluent from a busy restaurant (which had not been maintained) and a large septic tank that served several public toilets. The pipe ...


    By Bio Systems Europe

  • Blending microbes demands gentle touch

    Environmental-restoration product manufacturer requires fast, uniform, gentle blending of powdered microbes, enzymes and nutrients The microbial formulations that United-Tech, Inc. produces are used to break down or detoxify a broad array of complex, often-toxic organic compounds, greasy spills and other contaminants in a variety of ...

  • GWT BIO PS10 Series Case Study- Petrochemical Sludge Reduction

    GWT BIO™ Series Natural Microbiological Product Petroleum Refinery Field Case Study This field case study describes how our GWT BIO PS10 series natural microbiological product provides an alternate solution for disposal of hazardous organic compounds and offers a long term, cost-effective solution to the toughest waste water ...

  • Texas city treatment plant case study

    Performance History and Discussion Texas City selected in-Pipe Technology. Inc. to provide a collection system bioaugmentatlon program to control fats, oil and grease (FOG) and H2S odor in the sewer system. The program is also designed to reduce influent load to the wastewater treatment plant (WWTP), improve the quality of the effluent water, improve the operating efficiency and reduce ...

  • Bioaugmentation In Sewer Network Reduces Sludge Production

    This article describes the effectiveness of bioaugmentation in the sewer network as a strategy to reduce sludge production. Sludge is an obvious by-product generated from the physical, chemical and biological treatment processes of a wastewater treatment plant (WWTP) as shown in Figure 1. Sludge management, which includes treatment, hauling, and disposal, is one of the biggest burdens facing ...

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Maintenance for septic tanks

    Septic tanks are widely used for on site sewage treatment for domestic homes which are not connected to the sewer system. Little attention is given to the septic tank until there are problems such as smells or poor drainage or ponding on the surface. A little maintenance of the septic tank can be very helpful in maintaining performance of the septic tank. The outflow from a septic tank percolates ...


    By Biofuture Ltd

  • Bioaugmentation in Sewer network reduces sludge production case study

    Sludge is an obvious by-product generated from the physical, chemical and biological treatment processes of a wastewater treatment plant (WWTP) as shown in Figure 1. Sludge management, which includes treatment, hauling, and disposal, is one of the biggest burdens facing municipal plants. The costs of sludge management account for 55% of the total WWTP operating cost and 35° o of the capital ...

  • Control VOC`s in Refinery Wastewater

    Oil and water do not mix, like many of life’s one-liners this statement is basically true but not the whole story. Many hydrocarbon liquids, particularly aromatics, have significant solubilities in water: Benzene 1800 PPMVToluene 470Ethyl Benzene 150Xylenes 150 Petroleum refineries do not like salts in their feedstock since these corrode and foul process equipment. The first refining step is ...


    By AMCEC Inc.

  • Novel pretreatment enables performance of MBR installed to treat oily wastewater

    Abstract Two new integrated systems processes, gas-energy-mixing (GEM) flotation – electrochemical catalytic oxidation (ECO) – membrane bioreactor (MBR) and ultra-filtration (UF) – ECO – MBR, were tested in industrial-scale pilots of 200L/h to 3000L/h for the treatment and reuse of steel mill cold-rolling emulsion wastewater. The operation parameters and mechanisms of ...

  • Bio-augmentation of fixed film filters

    Once regarded as the main process option for the waste water treatment for small communities, circular biological filters, so common on the outskirts of towns for many years, provided a reliable low cost and low profile method of treating household waste water. Quiet and robust, their simple engineering and structural design could be easily maintained by a daily visit from an operator, who, on ...


    By Greener Waste Technology

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Glass blended rapidly with abrasion resistant rotary mixer

    While most reading this article may be unfamiliar with the Kopp Glass name, most are likely familiar with Kopp Glass products. From a humble beginning more than 80 years ago, as a manufacturer of red glass for railroad signals, Kopp now claims to be the world's leading producer of precision molded industrial quality technical glass.  The company is known worldwide among the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you