green waste technology Articles

  • A review of electronic waste management microbial participation: a green technology

    E-waste now has been a rapidly growing problem in terms of quantity and toxicity of its components. Recycling of e-waste becomes rather complicated because of the technological advancement in the materials and composition of the e-equipment. From the management perspective e-waste components can be divided in two categories: 1) organic part contains thermo and thermosetting plastic; 2) inorganic ...


    By Inderscience Publishers

  • Seawater desalination — a green technology?

    The need for resource-saving, low-impact “green” desalination technologies is evident as the use of desalination accelerates in many parts of the world. The concept of “best available techniques” (BAT) aims at the identification of state of the art technologies, processes, or methods of operation which indicate the practical suitability for preventing or reducing pollution of the atmosphere, ...


    By IWA Publishing

  • Emerging Waste Conversion Technologies

    Today, people and companies are more aware and concerned about the environment than ever before. Everyone is looking for ways to reduce waste or convert organic waste into something more useful. The Federal Government has introduced a renewable energy policy and is continuing to fund for new waste conversion technology. It is now important for local governments to portray their cities and towns ...


    By Compactor Management Company

  • 20th Annual Presidential Green Chemistry Challenge Awards highlight biomass- and waste-to-resource technologies

    On July 13, 2015, the U.S. Environmental Protection Agency (EPA) announced the winners of the 20th Annual Presidential Green Chemistry Challenge Awards (PGCCA) and honored them at a ceremony at the National Academy of Sciences in Washington, D.C. The PGCCAs were created in partnership with the American Chemical ...


    By Bergeson & Campbell, P.C.

  • The green document

    Replacing bottled water with Waterlogic POU units significantly reduces negative impact on the environment. Waterlogic products are by nature a disruptive technology replacing bottled water and promoting a positive effect on the environment: • Reducing fuel consumption resulting in CO2 emissions and traffic congestion caused by delivery trucks on the road moving bottles• Eliminating wasted ...


    By Waterlogic International Ltd

  • Dyeing to be green

    The textile industry uses copious amounts of water to dye fabrics — by some estimates, 25 liters of water just to dye a T-shirt. Not only that, but many textile factories are located in Eastern Asia, where chemical-laden water is sometimes dumped directly into local rivers. A technology recently  ...


    By Ensia

  • Zero landfill, zero waste: the greening of industry in Singapore

    This paper reviews how a land-scarce city-state is trying to achieve its goals of zero landfill and zero waste through the greening of industry. The main challenges Singapore confronts in its solid waste management are an increasing volume of industrial waste generated, a shortage of land for landfills, and escalating costs of incineration plants. To green its industries, there has been a ...


    By Inderscience Publishers

  • These entrepreneurs are using technology to turn a profit on food waste

    Creative businesses aim to get food that would otherwise be wasted into the hands of those who can use it. Food waste is bad for our wallets. It’s also bad for the environment — the equivalent of throwing away the water, energy and other resources that go into growing it in the first place. But as interest in reducing food waste grows, so does innovation to make it happen. ...


    By Ensia

  • Green remediation best management practices: pump and treat technologies

    Overview Pump and treat (P&T) technology typically is selected in a cleanup remedy to hydraulically contain contamination and/or restore an aquifer to beneficial use. Opportunities to reduce the energy and environmental footprint of a P&T remedy, which are available during site characterization and the remedy selection, design, construction, and operation phases, rely on effective planning and ...

  • Green technology PR specialist highlights growth of environmental goods sector

    The EU environmental goods and services sector has more than doubled in size over the last decade, from €320 billion in 2000 to €667bn in 2011.  This sector includes ...

  • A technology for the treatment of olive-mill waste water in a continuously fed plant

    Abstract A bench-scale pilot plant has been developed for the treatment of olive-mill water. The plant is fed in a continuous mode and implements a primary treatment (sand filtering and irradiation with UV-rays) and a secondary treatment (anoxic and aerobic biological treatment). Satisfactory results were obtained and the treated green water falls under the limits of the Italian legislation. ...


    By Springer

  • Greening the Built Environment

    ASTM Standards and Products Form the Foundation of Sustainable Construction Efforts Today, a major focal point for the worldwide building industry is the growing demand for sustainable construction. Sustainable, or “green,” construction is focused on the more effective use of resources and ultimately the creation of healthier, energy efficient, more environmentally ...


    By ASTM International

  • Energy Recovery from Residual Waste by Means of Anaerobic Digestion Technologies

    ABSTRACT Anaerobic digestion (AD) is a natural process, spontaneously taking place in natural surroundings, such as marshes,bogs, paddies, or in cesspits, landfills, and dedicated digesters, used for the conversion of organic waste into a rich gas. Typical AD substrates are: manure, sewage sludge, high BOD wastewater, and – more recently - the organic fraction of Municipal Solid Waste (MSW), ...


    By ORBIT e.V.

  • Geotube Dewatering Technology Provides Clean-up of Contaminated Waste - Case Study

    Contaminated sites continue to use Geotube® containers for PCBs, Metals, BTEX, PAHs, Arsenics, etc via pumping or dredging - mechanical and hydraulic methods. TenCate develops and produces materials that function to increase performance, reduce costs and deliver measurable results by working with our customers to provide advanced solutions. A unique high volume, low cost dewatering system ...

  • Evolution of integrated solid waste management systems enhanced with municipal utilities and green energy production

    Much has changed over the past 40 years in the advancement of solid waste management. Early solid waste drivers focused on the top-down tiered approach promoted by EPA, which embraced a hierarchy of integrated waste management practices. These practices promote the following methods (in order of preference) to reduce, reuse, recycle and recover value from municipal wastes: Source reduction and ...


    By Waste Advantage Magazine

  • COOL AS ICE New Canadian-made technology reduces water usage to redefine green cleaning

    Water is one of the most essential human needs. Yet, for something so key to life, hundreds of millions of gallons of H2O are wasted each year on industrial cleaning applications. The ecological impact of this type of consumption is a real concern and has led to the development of an innovative cleaning technology that could potentially replace high-water usage cleaning methods, such as pressure ...


    By Coulson Ice Blast

  • Project focuses on value-added product recovery, zero-waste wastewater technologies

    As sustainability and water scarcity continue to be key issues for water managers worldwide, it’s more and more critical to find new solutions and technologies. Check out the laser cutter which is a great new technology invention.  Wastewater is a particularly abundant and potentially useful resource. In fact, teams of European researchers are working to harvest energy and recover ...


    By Fluence Corporation

  • Manufacturing Goes Lean and Green

    Manufacturers around the world are uncovering the environmental as well as financial benefits of lean approaches. When John Quarmley started Highwood USA, a synthetic woods manufacturer, in 2003, he wanted the company to be good to its employees, to its community and especially to the environment. Based in the small town of Tamaqua, Pa., Highwood uses ...


    By Ensia

  • Rolf Stein featured in LAWR – Technology innovator speaks at Energy from Waste Expo

    Advanced Plasma Power’s chief executive Rolf Stein shares his thoughts ahead of Sustainability Live’s new event. Nick Warburton reports: I understand you will be speaking about an advanced thermal conversion technology that your company has developed. What’s the thinking behind it? What we’ve developed is something to address a number of challenges and ...


    By Advanced Plasma Power (APP)

  • Encouraging green industry innovation

    Recently, in the New York Times Green Column, Bettina Wassener wrote about the “Plastic Disclosure Project,” which annually surveys industry on their overall plastic use and reports back on consumption trends. The goal of the project is to raise ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you