grinding system Articles

  • Landfill grinding system

    A landfill needed a way to reduce their waste stream volume, increase the life of their landfill, and recover a recyclable, marketable product. Wood and yard waste material comprise up to 20% of their entire waste stream volume. Processing and recycling this material will extend the life of the landfill by 20 years. They chose WSM's Model 4864BH Horizontal Hogging System with a customized feed ...

  • The mills grind efficiently

    The – “Milser Mühle“ – has relied on AERZEN for 50 years When the Borgstedt Family took over the Milser Mühle 130 years ago, at first, it only produced feed material, and then, from 1918, it started to produce flour for human food. “Therefore we selected oilfree compressing AERZEN Positive Displacement Blowers of series GM as conveying air producer ...

  • Case study: Mechano-chemical grinding

    Challenge Traditional grinding mills reclaim only a fraction of precious metals from ore, leaving valuable material in the tailings. These minerals are more difficult to liberate, as it requires the ore to be ground to a very fine mesh. Approach GK was approached by a company who had a proprietary chemistry solution for recovering minerals from an existing ...


    By General Kinematics

  • The advantage of CNC Centerless Internal Grinding Machine

    The CNC series centerless grinding machines can be used for infeed grinding and thrufeed grinding to ensure accuracy, high productivity in workpieces Automatic loading and unloading attachment is convenient to operate and reduce cost. The main advantage are as follows: 1.The grinding and regulating wheel spindles are made of high quality alloy steel ...


  • Recovering oil from grinding sludge - Case Study

    Zahnradfertigung Ott uses RUF briquetting unit A large volume of sludge is produced in the grinding of high-precision gears. In most cases, this grinding sludge is disposed of at high costs. Zahnradfertigung Ott, a specialist manufacturer of gears, found a better solution: since 2005, the company is using a briquetting unit from RUF to recover 500 litres of grinding oil per day from the ...

  • Central system to capture grinding & deburring dusts case study

    The Problem Sputtek Inc. is a metal working company based in Toronto, Canada and manufactures metal parts needing to be deburred, polished, and cleaned before they can be used. These parts are varied in size depending on the project and the client insisted on the collection of all dust for reasons of employee safety and shop cleanliness.   The Solution A ...


    By DiversiTech

  • Advantage of Shengyang Hermos CNC Internal Grinding Machine

    Advantage of Shengyang Hermos CNC Internal Grinding Machine is as below: 1. This CNC Internal Grinding machine uses a transparent protective bulletproof glass, to meet a wider range of vision safety premise (three sides transparent), easy to observe the internal situation. ...


  • The advantage of CNC Internal Grinding Machine of Chuck Type

    The CNC series Chuck internal grinding machine is suitable for inner diameter of workpiece. The efficient and reliable programming of grinding and dressing cycles is suitable for mass production and ensures the precise concentricity on inner diameters. Below is the main advantage of it: 1.Equipped with FANUC colour screen, the latest technology in digital control systems. The ...


  • The Wheels of Integrated Product Policy Grind Slow

    Integrated product policy had an innovative feel when it appeared on the EU's environmental agenda in the late 1990s. But after much in-fighting and business lobbying, the White Paper on IPP issued by the European Commission in June proved disappointingly thin, and unlikely to make any significant impact on the market until the end of the decade at best. 'Fundamental changes in the way societies ...

  • Hermos precision grinding machine overturn the traditional double face CBN grinding process

    In the grinding of surface machining and parallel surfaces machining, modern face grinder CBN almost completely replaced the original rough grinding, fine grinding or polishing process, making the workpiece using CNC double-end grinder grinding grinding process more efficient, workpiece cleaner, currently general surface grinding ...


  • The High Precision CNC Grinding Machine In the Auto Parts Processing Industry

    We are a big country of automobile consumption, as well we are producing cars on a large scale. China's automobile manufacturing industry demand for the CNC Grinding machine growing. Under the impact of the world financial crisis, China's automobile manufacturing industry shows a strong potential for development. Automotive industry has become the largest market for the requirements of CNC ...

  • Toronto-area grinding firm grows while keeping it (very) local

    There's no arguing that Justice Veldman's age belies his experience. At 27, he already has more than a decade's worth of success heading up various businesses including firms that specialize in site maintenance, a nursery, a soil mix and compost operation, and more. His latest endeavor, operating under the banner of Couse Corporation - founded by his now-retired partner, Pete Couse - is a ...


    By Morbark, LLC

  • The Daily Grind: Scrap from panel saws is conveyed under production floor to grinder

    Cabinet manufacturing giant KraftMaid Cabinetry, Inc. in Middlefield, Ohio, engineered a material handling solution that has not only resulted in labor savings, but has also increased production efficiency and proved to ...


  • Oil and metal recovery from mill scale and grinding swarf for the metal industry - case study

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012. Our client is a medium-sized company operating in the field of waste recycling and ...


    By econ industries GmbH

  • Environmental crushing, screening and recycling: Bobo grinding chews on steady diet of ice storm wreckage

    The ice storms in Georgia earlier this year created a tremendous amount of fallen trees and limbs in the metro Atlanta area, which needed to be recycled. The city of Marietta, GA and Cobb County, GA, contracted with Bobo Grinding Inc. based in Woodstock, GA, to reduce the wood waste to create mulch for use at various other sites. Bobo Grinding set up a temporary site for grinding near the ...


    By Morbark, LLC

  • For Syracuse company, it`s all about spec grinding (with a serious twist) yields specialty soil blends for blowing

    To the layman, making a soil capable of being applied by a blower truck would seem fairly rudimentary: take dirt, grind it, screen it and blow it. It's not rocket science, they'd say, and, at times, Cliff White wishes all that were true. The founder and owner of Syracuse, NY-based Ground Effects, Inc., has found - and proves it daily - that creating a soil product to meet a specific need, really ...


    By Morbark, LLC

  • Hurricane HR Cyclones to Reduce Emissions from Wet Woodchips Grinding at Verdo Renewables Ltd. (8 000 m3 /hat 20ºC) – Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied two Hurricane Cyclones, HC series, for Verdo Renewables Ltd. The company is a fully owned subsidiary of Verdo Holdings A/S which has its HQ in Randers, Denmark. It has two production plants in the UK: Andover in Hampshire and Grangemouth in Scotland. Each plant has an annual production capacity of 55 000 tonnes of wood ...

  • Briquetting systems for wood and metal

    Almost 30 years ago the Zaisertshofen-based RUF GmbH & Co. KG specialized in the development and production of briquetting systems. What started with a press for briquetting bark, has become a versatile and internationally active company over the years. RUF GmbH & Co. KG manufacture their briquetting systems in Germany. Their manufacturing and design divisions make it possible to respond ...

  • Compact sewage system offers trouble free operation

    The toilets, which are located directly beneath Southport’s tourist information centre, are open 24 hours, but notattended at night. This has resulted in abuse of the drainage system, with drink cans and hypodermic needles regularly found in the sump. The compressed air operated sewage ejector system previously installed beneath the toilets, could not cope with this abuse and required expensive ...


    By NOV Mono - Mono Pumps Ltd

  • Cost Effective Corrosive Fume Exhaust System

    Background:Independent Sheet Metal, a northern New Jersey firm engaged in the fabrication and installation of sheet metal ductwork for heating, ventilation and air conditioning (HVAC) systems had a customer give them a tough assignment. A large pharmaceutical manufacturer requested a recommendation for a cost-effective corrosive fume exhaust system for their multiple scale organic building ...


    By FAB-TECH Incorporated

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you